diff --git a/docs/install_pulseaudio.md b/docs/install_pulseaudio.md
index c8893a5..42cd942 100644
--- a/docs/install_pulseaudio.md
+++ b/docs/install_pulseaudio.md
@@ -1,6 +1,6 @@
 ## Install PulseAudio On Your Wyoming Voice Satellite
 
-> Courtesy of https://github.com/FutureProofHomes/wyoming-enhancements/blob/master/snapcast/docs/2_install_pulseaudio.md with minor modifications
+> Courtesy of https://github.com/FutureProofHomes/wyoming-enhancements/blob/master/snapcast/docs/2_install_pulseaudio.md with now major modifications
 
 ## 1. Connect to your Pi over SSH using the username/password you configured during flashing:
 
@@ -37,52 +37,7 @@ sudo reboot -h now
 ## 5. SSH back in to your Pi.  (See step 1.)
 
 
-## 6. Ensure PulseAudio is runnining in "system-wide mode".  Per the [official instructions](https://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/SystemWide/) we first need to stop some existing services to be safe:
-
-```sh
-sudo systemctl --global disable pulseaudio.service pulseaudio.socket
-```
-
-
-## 7. It is also advisable to set `autospawn = no` in `/etc/pulse/client.conf`:
-
-```sh
-sudo sed -i.bak \
-    -e '$a### Disable autospawn' \
-    -e '$aautospawn = no' \
-    /etc/pulse/client.conf
-```
-
-
-## 8. Create the `PulseAudio.service`:
-
-```sh
-sudo cp ~/linux-voice-assistant/service/pulseaudio.service /etc/systemd/system/pulseaudio.service
-```
-
-
-## 9. Start the `PulseAudio.service`.  This will require you to type in your password a couple times.
-
-```sh
-systemctl --system enable pulseaudio.service
-```
-
-```sh
-systemctl --system start pulseaudio.service
-```
-
-
-## 10. Ensure pi user is in the `pulse-access` group:
-***If you aren't using the default "pi" user, put your user in here instead of "pi".***
-```sh
-sudo sed -i '/^pulse-access:/ s/$/root,pi/' /etc/group
-```
-
-
-## 11. Reboot your Pi: (see step 4)
-
-
-## 12. (OPTIONAL) If plugging speakers into the headphone jack of the ReSpeaker, set the correct PulseAudio Sink Port:
+## 6. (OPTIONAL) If plugging speakers into the headphone jack of the ReSpeaker, set the correct PulseAudio Sink Port:
 
 Run `pactl list sinks` and scroll to the bottom and notice your Active Port is probably "analog-output-speaker".  Run the command below to output audio through the 3.5mm headphone jack.
 
@@ -97,136 +52,23 @@ pactl set-default-sink alsa_output.platform-soc_sound.stereo-fallback
 ```
 
 
-## 13. Test and make sure you can hear the wav file.:
-
-```sh
-paplay /usr/share/sounds/alsa/Front_Center.wav
-```
+## 7. Test and make sure you can hear the wav file.:
 
 **Note that if you have a Raspbery Pi 3B or 4B, this may or may not seem to work, but it will output on the hat as intended.**
 
-
-## 14. The following modifications are specifically required for LVA's mpv_player.py to work with PA. If you do not have a working PA at this point, do not proceed.:
-Backup current PA daemon.conf file.
-
-```bash
-sudo cp /etc/pulse/daemon.conf{,.bak.$(date +%s)}
-```
-
-Update the PA /etc/pulse/daemon.conf file with required change. Replaces if present (commented or not).
-
-```bash
-sudo sed -i -E \
-  -e 's|^[#;[:space:]]*exit-idle-time\s*=.*$|exit-idle-time = -1|' \
-  -e 's|^[#;[:space:]]*resample-method\s*=.*$|resample-method = trivial|' \
-  -e 's|^[#;[:space:]]*flat-volumes\s*=.*$|flat-volumes = no|' \
-  -e 's|^[#;[:space:]]*default-sample-rate\s*=.*$|default-sample-rate = 44100|' \
-  -e 's|^[#;[:space:]]*alternate-sample-rate\s*=.*$|alternate-sample-rate = 48000|' \
-  -e 's|^[#;[:space:]]*default-fragment-size-msec\s*=.*$|default-fragment-size-msec = 15|' \
-  /etc/pulse/daemon.conf
-```
-
-Just in case the values were missing, may not be needed but shouldn't hurt.
-
-```bash
-for kv in \
- 'exit-idle-time = -1' \
- 'resample-method = trivial' \
- 'flat-volumes = no' \
- 'default-sample-rate = 44100' \
- 'alternate-sample-rate = 48000' \
- 'default-fragment-size-msec = 15'; do
-  k="${kv%% =*}"
-  sudo grep -Eq "^[[:space:]]*${k}[[:space:]]*=" /etc/pulse/daemon.conf || echo "$kv" | sudo tee -a /etc/pulse/daemon.conf >/dev/null
-done
-```
-
-Backup current PA system.pa file.
-
-```bash
-sudo cp /etc/pulse/system.pa{,.bak.$(date +%s)}
-```
-
-Update the PA /etc/pulse/system.pa file with required change. Replaces if present (commented or not).
-
-```bash
-sudo sed -i -E \
-  -e 's|^[#;[:space:]]*(load-module[[:space:]]+module-udev-detect)([[:space:]].*)?$|\1 tsched=0|' \
-  -e 's|^[#;[:space:]]*(load-module[[:space:]]+module-native-protocol-unix.*)$|\1|' \
-  -e 's|^[#;[:space:]]*(load-module[[:space:]]+module-default-device-restore.*)$|\1|' \
-  -e 's|^[#;[:space:]]*(load-module[[:space:]]+module-always-sink.*)$|\1|' \
-  -e 's|^[#;[:space:]]*(load-module[[:space:]]+module-position-event-sounds.*)$|\1|' \
-  /etc/pulse/system.pa
-```
-
-Just in case the values were missing, may not be needed but shouldn't hurt.
-
-```bash
-for m in \
- 'load-module module-native-protocol-unix' \
- 'load-module module-default-device-restore' \
- 'load-module module-always-sink' \
- 'load-module module-position-event-sounds'; do
-  sudo grep -Eq "^[[:space:]]*$m(\s|$)" /etc/pulse/system.pa || echo "$m" | sudo tee -a /etc/pulse/system.pa >/dev/null
-done
-```
-
-Backup current PA default.pa file.
-
-```bash
-sudo cp /etc/pulse/default.pa{,.bak.$(date +%s)}
-```
-
-Update the PA /etc/pulse/default.pa file with required change. Replaces if present (commented or not).
-
-```bash
-sudo sed -i -E \
-  -e 's|^[#;[:space:]]*(load-module[[:space:]]+module-udev-detect)([[:space:]].*)?$|\1 tsched=0|' \
-  -e 's|^[#;[:space:]]*(load-module[[:space:]]+module-native-protocol-unix.*)$|\1|' \
-  -e 's|^[#;[:space:]]*(load-module[[:space:]]+module-default-device-restore.*)$|\1|' \
-  -e 's|^[#;[:space:]]*(load-module[[:space:]]+module-always-sink.*)$|\1|' \
-  -e 's|^[#;[:space:]]*(load-module[[:space:]]+module-intended-roles.*)$|\1|' \
-  /etc/pulse/default.pa
-```
-
-Just in case the values were missing, may not be needed but shouldn't hurt.
-
-```bash
-for m in \
- 'load-module module-native-protocol-unix' \
- 'load-module module-default-device-restore' \
- 'load-module module-always-sink' \
- 'load-module module-intended-roles'; do
-  sudo grep -Eq "^[[:space:]]*$m(\s|$)" /etc/pulse/default.pa || echo "$m" | sudo tee -a /etc/pulse/default.pa >/dev/null
-done
-```
-
-Optional since LVA handles duck/unduck: if you enabled role-ducking explicitly in system.pa, you can comment it out with:
-
-```bash
-sudo sed -i -E 's|^([[:space:]]*)load-module[[:space:]]+module-role-ducking\b|# \0|' /etc/pulse/system.pa
-```
-## 15. Restart PA and verify
-
-```bash
-sudo systemctl restart pulseaudio.service
-```
-
 Test mpv can ouput to PA with current configs:
 
 ```bash
 mpv --ao=pulse --audio-device=default --audio-samplerate=44100 /usr/share/sounds/alsa/Front_Center.wav
 ```
 
-If you disabled your Linux Voice Assistant service in step 2., enable it now:
+
+## 8. If you disabled your Linux Voice Assistant service in step 2., enable it now:
 
 ```bash
 sudo systemctl enable --now linux-voice-assistant.service
 ```
 
-## 16. Reboot your Pi: (see step 4)
-
-
 ## 17. Done! Return to the tutorial to continue the Linux Voice Assistant install.
 
 
@@ -237,3 +79,4 @@ sudo systemctl enable --now linux-voice-assistant.service
 
 
 
+