build: update version

HARDWARE.md

@@ -0,0 +1,33 @@
+# TouchKio - Supported Hardware
+This document contains an incomplete list of device and display hardware combinations that are either intended to be tested or have already been tested.
+
+The [release](https://github.com/leukipp/touchkio/releases) page has builds exclusively for **arm64**, but custom builds for other architectures can be made (see [Development](https://github.com/leukipp/touchkio?tab=readme-ov-file#development)), allowing the application to operate on any hardware.
+At least the **minimal** features, such as displaying a **kiosk window** (which doesn't necessarily need to be Home Assistant) will work.
+
+## Hardware
+Any SBC clones of the Raspberry Pi that operate on **Raspberry Pi OS (64-bit)** and **Wayland** are likely to function as well.
+
+### DSI
+| Device         | Display                                                                                         | Tested | Status            | Notes                                                  |
+| -------------- | ----------------------------------------------------------------------------------------------- | ------ | ----------------- | ------------------------------------------------------ |
+| Raspberry Pi 3 | [Official 7" Touch Display 1](https://www.raspberrypi.com/products/raspberry-pi-touch-display/) | ❌      | Unknown           | 99% chance that it is slow and the resolution sucks.   |
+| Raspberry Pi 3 | [Official 7" Touch Display 2](https://www.raspberrypi.com/products/touch-display-2/)            | ❌      | Unknown           | 99% chance that it is slow.                            |
+| Raspberry Pi 4 | [Official 7" Touch Display 1](https://www.raspberrypi.com/products/raspberry-pi-touch-display/) | ❌      | Unknown           | 99% chance that the resolution sucks.                  |
+| Raspberry Pi 4 | [Official 7" Touch Display 2](https://www.raspberrypi.com/products/touch-display-2/)            | ❌      | Optimistic        | 99% chance that it fully works.                        |
+| Raspberry Pi 5 | [Official 7" Touch Display 1](https://www.raspberrypi.com/products/raspberry-pi-touch-display/) | ❌      | Unknown           | 99% chance that the resolution sucks.                  |
+| Raspberry Pi 5 | [Official 7" Touch Display 2](https://www.raspberrypi.com/products/touch-display-2/)            | ✅      | Fully operational | Working display power and brightness control via MQTT. |
+
+### HDMI
+| Device         | Display           | Tested | Status                | Notes                                                 |
+| -------------- | ----------------- | ------ | --------------------- | ----------------------------------------------------- |
+| Raspberry Pi 4 | -                 | ✅      | Partially operational | -                                                     |
+| Raspberry Pi 5 | Generic Non-Touch | ✅      | Partially operational | Display brightness control is not available via MQTT. |
+
+## Contributions
+In case your hardware is not listed above don't worry, give it a try.
+Running `touchkio --web-url=https://demo.home-assistant.io` will most likely just work.
+The only problems that may arise are when controlling the display via the Home Assistant integration.
+
+- If you encounter any problems, please create a new [issue](https://github.com/leukipp/touchkio/issues).
+- If you encounter any problems and are able to fix it yourself, feel free to create a [pull request](https://github.com/leukipp/touchkio/pulls).
+- If everything works as expected and your hardware is not yet listed, you are welcome to add it and create a [pull request](https://github.com/leukipp/touchkio/pulls).

README.md

@@ -1 +1,168 @@
-# touchkio
+# TouchKio
+**TouchKio** is a Node.js application that utilizes **Electron** to create a kiosk mode specifically designed for a Home Assistant dashboard (or any other [webpage](https://github.com/leukipp/touchkio/blob/main/HARDWARE.md)).
+This tool is packaged as a **.deb** file, making it easy to launch the kiosk mode on a **Raspberry Pi** (or similar [hardware](https://github.com/leukipp/touchkio/blob/main/HARDWARE.md)) equipped with a touch display.
+
+[![display](https://raw.githubusercontent.com/leukipp/touchkio/main/img/display.png)](https://github.com/leukipp/touchkio/blob/main/img/display.png)
+
+This implementation addresses common issues encountered when using the built-in browser running in fullscreen mode on the Raspberry Pi with touch display.
+Moreover, the device running the **kiosk application** also offers several **Home Assistant MQTT** sensors, enhancing it's functionality for automation purposes.
+
+## Features
+- [x] Fast and easy setup.
+- [x] Touch friendly web browser interface.
+- [x] Configurable zoom and theme support. 
+- [x] Single-tap screen wake-up functionality.
+- [x] Remote controllable via MQTT.
+  - [x] Manage kiosk window status.
+  - [x] Touch display power and brightness.
+  - [x] Execute system reboot and shutdown commands.
+  - [x] Monitor temperature, processor and memory usage.
+
+The kiosk application can be executed with command line arguments to load a **Home Assistant dashboard in fullscreen** mode.
+Additionally, a **MQTT endpoint** can be defined, allowing the application to provide controls and sensors for the Raspberry Pi and the connected touch display.
+
+## Setup
+Before you begin, make sure that you have a Raspberry Pi configured and operational with a [compatible touch display](https://github.com/leukipp/touchkio/blob/main/HARDWARE.md).
+This guide assumes that you are using the latest version of **Raspberry Pi OS (64-bit)** together with a **Wayland** based desktop environment.
+
+### Optional
+To utilize the sensor features of your display through Home Assistant, it's essential to have a **MQTT broker running** and the **MQTT integration installed** on your Home Assistant instance.
+This setup allows seamless communication between your kiosk device and Home Assistant, enabling **real-time data exchange**.
+
+[![mqtt](https://raw.githubusercontent.com/leukipp/touchkio/main/img/mqtt.png)](https://github.com/leukipp/touchkio/blob/main/img/mqtt.png)
+
+For a comprehensive guide on setting up MQTT with Home Assistant, please refer to the official documentation available here: https://www.home-assistant.io/integrations/mqtt.
+
+## Installation
+On the first run of the application, you may encounter a **setup procedure** and the Home Assistant **login screen**.
+It's recommended to create a **dedicated user** (local access only) for your kiosk device.
+You might also need a keyboard or remote VNC access to input these credentials once.
+
+#### Option 1 - The easy way
+Run this command to download and install the release **.deb** file. It will also adjust some permissions, create a systemd file for auto-startup and will guide you through the setup process:
+```bash
+bash <(wget -qO- https://raw.githubusercontent.com/leukipp/touchkio/main/install.sh)
+```
+If you are paranoid, or smart, or both, have a look into the [install.sh](https://github.com/leukipp/touchkio/blob/main/install.sh) script before executing external code on your machine.
+
+#### Option 2 - The hard way
+The [install.sh](https://github.com/leukipp/touchkio/blob/main/install.sh) script mentioned above performs the following tasks (and you just have to do it manually):
+- [Download](https://github.com/leukipp/touchkio/releases/latest) the latest **.deb** file,
+which is specifically suitable for Raspberry Pi **(64-bit)** ARM architecture.
+- Open a terminal and execute the following command to install the application, e.g:
+`sudo dpkg -i touchkio_1.x.x_arm64.deb`
+- If you just want to load a Home Assistant dashboard without further control you are good to go, e.g: `touchkio --web-url=https://demo.home-assistant.io`
+
+If you need the application to be automatically started on boot, create a **systemd file**.  
+If you need the Home Assistant MQTT sensors, create the **udev rule** for backlight control.
+
+## Configuration
+Running `touchkio --setup` will prompt you to enter arguments that will be used when the application starts without any specified arguments.
+These default arguments are stored in `~/.config/touchkio/Arguments.json`, where they can also be modified.
+
+### WEB
+The available arguments to control the kiosk application via terminal are as follows: 
+| Name                     | Default | Description                                            |
+| ------------------------ | ------- | ------------------------------------------------------ |
+| `--web-url` (Required)   | -       | Url of the Home Assistant instance (HTTP(S)://IP:PORT) |
+| `--web-theme` (Optional) | `dark`  | Theme settings of the web browser (`light` or `dark`)  |
+| `--web-zoom` (Optional)  | `1.25`  | Zoom settings of the web browser (`1.0` is `100%`)     |
+
+These arguments allow you to customize the appearance of the web browser window.
+
+For example:
+```bash
+touchkio --web-url=http://192.168.1.42:8123 --web-theme=dark --web-zoom=1.25
+```
+
+### MQTT
+To broadcast your local sensor data to Home Assistant, you can use the following arguments, which require a running MQTT broker:
+| Name                          | Default         | Description                                                                              |
+| ----------------------------- | --------------- | ---------------------------------------------------------------------------------------- |
+| `--mqtt-url` (Required)       | -               | Url of the MQTT broker instance (MQTT(S)://IP:PORT)                                      |
+| `--mqtt-user` (Required)      | -               | Username which is available in Home Assistant (e.g. create a user named `kiosk`)         |
+| `--mqtt-password` (Required)  | -               | The password of the user (e.g. use `password`, because it's secure and easy to remember) |
+| `--mqtt-discovery` (Optional) | `homeassistant` | The discovery prefix for MQTT (`homeassistant` works with default setups)                |
+
+When you start the application with the MQTT arguments, the Home Assistant auto-discovery feature will automatically add controls and sensors that can be used for further integration.
+You can find them under **Settings** -> **Devices and Services** -> **Devices** by searching for "Raspberry Pi".
+
+For example:
+```bash
+touchkio --web-url=http://192.168.1.42:8123 --mqtt-url=mqtt://192.168.1.42:1883 --mqtt-user=kiosk --mqtt-password=password
+```
+
+## Development
+If you want to create your own local build install [nodejs](https://pimylifeup.com/raspberry-pi-nodejs) and [yarn](https://classic.yarnpkg.com/lang/en/docs/install) on your Raspberry Pi.
+
+Clone this repository and run `yarn install` to install the dependencies.
+Then use `yarn start` to execute the `start` script located in the [package.json](https://github.com/leukipp/touchkio/blob/main/package.json) file.
+There you can adjust the `--web-url` and other arguments for development runs.
+
+If you connect to your Raspberry Pi via SSH, you must export the display variables so that the kiosk application can be loaded in the desktop environment:
+```bash
+export DISPLAY=":0"
+export WAYLAND_DISPLAY="wayland-0"
+```
+
+### The nitty gritty
+
+<details><summary>Don't waste your time reading this.</summary><div></br>
+
+To enable **write access** to the `/sys/class/backlight/10-0045/bl_power` and `/sys/class/backlight/10-0045/brightness` files, you need to set up a **udev rule**. In case you don't use the official touch display you may have to change the rules, that are located under `/etc/udev/rules.d/backlight-permissions.rules`.
+
+This rule is created via the [install.sh](https://github.com/leukipp/touchkio/blob/main/install.sh) script, which also creates a service file.
+The service file is located at `~/.config/systemd/user/touchkio.service` and starts the `/usr/bin/touchkio` process when the graphical user interface is loaded.
+While creating a service file is optional, it's highly recommended if you want your Raspberry Pi to automatically boot into kiosk mode.
+
+The Raspberry Pi's **build-in screen blanking** function uses the command `swayidle -w timeout 600 'wlopm --off \*' resume 'wlopm --on \*' &` inside `~/.config/labwc/autostart` to blank the screen after **10 minutes**.
+The `wlopm --off \*` command changes the `bl_power` value to **4**, when setting the value to **0** the screen will turn on again.
+However, `swayidle` still seems to consider the screen to be off and as a result it will not turn off again unless there is some interaction in the meantime.
+
+When using the MQTT integration, the kiosk application must be able to **detect changes** made on the **device** itself.
+I managed to achieve this for the `brightness` file by implementing a simple `fs.watch(..)` file listener.
+However, I found that it **never triggered** for the `bl_power` file.
+Although the file content changes, none of the filesystem listeners where fired.
+This could be due to `swayidle`/`wlopm` performing write actions at a deeper level that are not detectable by file listeners.
+As a result, I went for a **polling solution**, checking the state of the file every **500 milliseconds** for any changes.
+While I understand this is not ideal, it's necessary to ensure proper functionality.
+
+The display power status and brightness can be adjusted via the MQTT integration.
+**Support** for changing the power status for **DSI and HDMI** displays is achieved by checking for connected screens in `/sys/class/drm/*/status`.
+Support for changing the brightness of connected display is implemented by using `/sys/class/backlight/*/brightness`.
+In cases where no supported backlight device is found, the Home Assistant light entity will only show an on/off switch without brightness control.
+
+Keep in mind that default arguments are stored as plain text in `~/.config/touchkio/Arguments.json`.
+This file also includes the **MQTT user password**, which is somewhat obfuscated/encrypted, but in a way that it could be easily reverse engineered.
+Implementing stronger **security measures** would complicate the setup process and could discourage some users from configuring the application properly.
+When using the kiosk application without initializing the default arguments, you will need to provide them with every command.
+This means that the password may be stored as plain text in various files, such as `touchkio.service`, `~/.bash_history`, etc.
+
+To resolve the issue where the first **touch** on a **turned-off screen** triggers a **click event** (potentially activating Home Assistant actions), I implemented a workaround.
+When the screen **turns off** the **focus** is removed from the kiosk window.
+This way, the first click only turns the screen on and focuses the window, allowing subsequent clicks to work as expected.
+
+Additionally, to address the problem that scrolling on the Raspberry Pi only works with the **web browser scrollbar** on the right, the Electron app is configured to **simulate a touch device** using `Emulation.setEmitTouchEventsForMouse`.
+This adjustment provides a user experience similar to that of a proper mobile device.
+
+Electron apps are known to be **resource intensive** due to their architecture and the inclusion of a full web browser environment. If you just run the kiosk application without other heavy loads, everything should run smoothly.
+
+</div></details>
+
+## Issues
+Please have a look into the [hardware](https://github.com/leukipp/touchkio/blob/main/HARDWARE.md) documentation if you ran into any issues. 
+
+- Depending on the display hardware you are using, some features of the MQTT integration may not fully work (e.g. display brightness control).
+  - This is especially common when using X11 instead of Wayland (default on Raspberry Pi OS).
+- You can use Raspberry Pi's build-in screen blanking functionality, however, if the screen is turned on through Home Assistant after being automatically turned off, it will remain on indefinitely.
+  - It's recommended to either use the built-in screen blanking feature or implement a Home Assistant automation (e.g. presence detection) to manage the screen status.
+- Hyperlinks that redirect the browser away from the main window are intentionally disabled.
+  - This decision was made to maintain a clean design, as navigation buttons to move back and forth between different sites were not included.
+- On the Raspberry Pi terminal you may see some *ERROR:gbm_wrapper.cc* messages.
+  -  This appears to be a [known issue](https://github.com/electron/electron/issues/42322) that currently lacks a fix, but the webview still works.
+
+## Credits
+Inspired by the one and only Raspberry Pi Master Lord, [Jeff Geerling](https://www.jeffgeerling.com/blog/2024/home-assistant-and-carplay-pi-touch-display-2).
+
+## License
+[MIT](https://github.com/leukipp/touchkio/blob/main/LICENSE)

index.js

@@ -0,0 +1,226 @@
+const fs = require("fs");
+const path = require("path");
+const crypto = require("crypto");
+const readline = require("readline/promises");
+const integration = require("./src/integration");
+const hardware = require("./src/hardware");
+const webview = require("./src/webview");
+const { app } = require("electron");
+
+/**
+ * This promise resolves when the app has finished initializing,
+ * allowing to safely create browser windows and perform other
+ * initialization tasks.
+ */
+app.whenReady().then(async () => {
+  const lock = app.requestSingleInstanceLock();
+  if (!lock) {
+    console.error("TouchKio is already running");
+    return app.quit();
+  }
+  let args = parseArgs(process);
+  let argsProvided = !!Object.keys(args).length;
+
+  let argsFilePath = path.join(app.getPath("userData"), "Arguments.json");
+  let argsFileExists = fs.existsSync(argsFilePath);
+
+  // Setup arguments from file path
+  if ("setup" in args || (!argsProvided && !argsFileExists)) {
+    await sleep(3000);
+    do {
+      args = await promptArgs(process);
+    } while (!Object.keys(args).length);
+    writeArgs(argsFilePath, args);
+  } else if (!argsProvided && argsFileExists) {
+    args = readArgs(argsFilePath);
+  }
+
+  // Show used arguments
+  const json = JSON.stringify(args, null, 2);
+  console.log(`Arguments: ${json}`);
+
+  // Chained init functions
+  const chained = [webview.init, hardware.init, integration.init];
+  for (const init of chained) {
+    if (!(await init(args))) {
+      break;
+    }
+  }
+});
+
+/**
+ * Parses command-line arguments from the given process object.
+ *
+ * @param {Object} proc - The process object.
+ * @returns {Object} An object mapping argument names to their corresponding values.
+ */
+const parseArgs = (proc) => {
+  let args = {};
+  proc.argv.slice(1).forEach((arg) => {
+    if (arg !== ".") {
+      const [key, value] = arg.split("=");
+      args[key.replace("--", "").replace("-", "_")] = value;
+    }
+  });
+  return args;
+};
+
+/**
+ * Prompts argument values on the command-line.
+ *
+ * @param {Object} proc - The process object.
+ * @returns {Object} An object mapping argument names to their corresponding values.
+ */
+const promptArgs = async (proc) => {
+  const read = readline.createInterface({
+    input: proc.stdin,
+    output: proc.stdout,
+  });
+
+  // Array of prompts
+  const prompts = [
+    {
+      key: "web_url",
+      question: "\nEnter WEB url",
+      fallback: "http://192.168.1.42:8123",
+    },
+    {
+      key: "web_theme",
+      question: "Enter WEB theme",
+      fallback: "dark",
+    },
+    {
+      key: "web_zoom",
+      question: "Enter WEB zoom level",
+      fallback: "1.25",
+    },
+    {
+      key: "mqtt",
+      question: "\nConnect to MQTT Broker?",
+      fallback: "y/N",
+    },
+    {
+      key: "mqtt_url",
+      question: "\nEnter MQTT url",
+      fallback: "mqtt://192.168.1.42:1883",
+    },
+    {
+      key: "mqtt_user",
+      question: "Enter MQTT username",
+      fallback: "kiosk",
+    },
+    {
+      key: "mqtt_password",
+      question: "Enter MQTT password",
+      fallback: "password",
+    },
+    {
+      key: "mqtt_discovery",
+      question: "Enter MQTT discovery prefix",
+      fallback: "homeassistant",
+    },
+    {
+      key: "check",
+      question: "\nEverything looks good?",
+      fallback: "Y/n",
+    },
+  ];
+
+  // Prompt questions and wait for the answers
+  let args = {};
+  let ignore = [];
+  for (const { key, question, fallback } of prompts) {
+    if (key === "mqtt") {
+      const prompt = `${question} (${fallback}): `;
+      const answer = await read.question(prompt);
+      const value = (answer.trim() || fallback.match(/[YN]/)[0]).toLowerCase();
+      if (!["y", "yes"].includes(value)) {
+        ignore = ignore.concat(["mqtt_url", "mqtt_user", "mqtt_password", "mqtt_discovery"]);
+      }
+    } else if (key === "check") {
+      const json = JSON.stringify(args, null, 2);
+      const prompt = `${question}\n${json}\n(${fallback}): `;
+      const answer = await read.question(prompt);
+      const value = (answer.trim() || fallback.match(/[YN]/)[0]).toLowerCase();
+      if (!["y", "yes"].includes(value)) {
+        args = {};
+      }
+    } else if (!ignore.includes(key)) {
+      const prompt = `${question} (${fallback}): `;
+      const answer = await read.question(prompt);
+      const value = answer.trim() || fallback;
+      args[key] = value;
+    }
+  }
+  read.close();
+
+  return args;
+};
+
+/**
+ * Writes argument values to the filesystem.
+ *
+ * @param {string} path - Path of the .json file.
+ * @param {Object} args - The arguments object.
+ */
+const writeArgs = (path, args) => {
+  const argc = Object.assign({}, args);
+  if ("mqtt_password" in argc) {
+    argc.mqtt_password = encrypt(argc.mqtt_password);
+  }
+  fs.writeFileSync(path, JSON.stringify(argc, null, 2));
+};
+
+/**
+ * Reads argument values from the filesystem.
+ *
+ * @param {string} path - Path of the .json file.
+ * @returns {Object} The arguments object.
+ */
+const readArgs = (path) => {
+  const args = JSON.parse(fs.readFileSync(path));
+  if ("mqtt_password" in args) {
+    args.mqtt_password = decrypt(args.mqtt_password);
+  }
+  return args;
+};
+
+/**
+ * Helper function for string encryption.
+ *
+ * @param {string} value - Plain text value.
+ * @returns {string} Encrypted value.
+ */
+const encrypt = (value) => {
+  const iv = crypto.randomBytes(16);
+  const key = crypto.scryptSync(hardware.getMachineId(), app.getName(), 32);
+  const cipher = crypto.createCipheriv("aes-256-cbc", key, iv);
+  let encrypted = cipher.update(value, "utf8", "hex");
+  encrypted += cipher.final("hex");
+  return Buffer.from(iv.toString("hex") + ":" + encrypted).toString("base64");
+};
+
+/**
+ * Helper function for string decryption.
+ *
+ * @param {string} value - Encrypted value.
+ * @returns {string} Plain text value.
+ */
+const decrypt = (value) => {
+  const p = Buffer.from(value, "base64").toString("utf8").split(":");
+  const iv = Buffer.from(p.shift(), "hex");
+  const key = crypto.scryptSync(hardware.getMachineId(), app.getName(), 32);
+  const decipher = crypto.createDecipheriv("aes-256-cbc", key, iv);
+  const buffer = Buffer.from(p.join(":"), "hex");
+  let decrypted = decipher.update(buffer, "binary", "utf8");
+  decrypted += decipher.final("utf8");
+  return decrypted;
+};
+
+/**
+ * Helper function for asynchronous sleep.
+ *
+ * @param {number} ms - Sleep time in milliseconds.
+ * @returns {Promise} A promise resolving after the timeout.
+ */
+const sleep = (ms) => new Promise((r) => setTimeout(r, ms));

install.sh

@@ -0,0 +1,83 @@
+#!/usr/bin/env bash
+
+# Download the latest .deb package
+echo -e "Downloading the latest release..."
+
+DEB_URL=$(wget -qO- https://api.github.com/repos/leukipp/touchkio/releases/latest | \
+grep -o '"browser_download_url": "[^"]*\.deb"' | \
+sed 's/"browser_download_url": "//;s/"//g')
+DEB_PATH="/tmp/$(basename "$DEB_URL")"
+
+if [ -z "$DEB_URL" ]; then
+    echo "Download url for .deb file not found."
+    exit 1
+fi
+
+if ! wget --show-progress -q -O "$DEB_PATH" "$DEB_URL"; then
+    echo "Failed to download the .deb file."
+    exit 1
+fi
+
+# Install the latest .deb package
+echo -e "\nInstalling the latest release..."
+
+if ! sudo dpkg -i "$DEB_PATH"; then
+    echo "Installation of .deb file failed."
+    exit 1
+fi
+
+# Create the systemd user service
+echo -e "\nCreating systemd user service..."
+
+SERVICE_FILE="$HOME/.config/systemd/user/touchkio.service"
+mkdir -p "$(dirname "$SERVICE_FILE")" || { echo "Failed to create directory for $SERVICE_FILE"; exit 1; }
+
+bash -c "cat << EOF > \"$SERVICE_FILE\"
+[Unit]
+Description=TouchKio
+After=graphical.target
+
+[Service]
+ExecStart=/usr/bin/touchkio
+Restart=on-failure
+RestartSec=5s 
+
+[Install]
+WantedBy=default.target
+EOF"
+
+systemctl --user enable "$(basename "$SERVICE_FILE")" || { echo "Failed to enable service $SERVICE_FILE"; exit 1; }
+echo "Service $SERVICE_FILE enabled"
+
+# Create the udev rule for backlight
+echo -e "\nCreating udev rule for backlight..."
+
+UDEV_FILE="/etc/udev/rules.d/backlight-permissions.rules"
+sudo bash -c "cat << EOF > \"$UDEV_FILE\"
+SUBSYSTEM==\"backlight\", KERNEL==\"10-0045\", RUN+=\"/bin/chmod 666 /sys/class/backlight/%k/bl_power /sys/class/backlight/%k/brightness\"
+EOF"
+echo "Rule $UDEV_FILE created"
+
+# Export display variables
+echo -e "\nExporting display variables..."
+
+if [ -z "$DISPLAY" ]; then
+    export DISPLAY=":0"
+    echo "DISPLAY was not set, defaulting to \"$DISPLAY\""
+else
+    echo "DISPLAY is set to \"$DISPLAY\""
+fi
+if [ -z "$WAYLAND_DISPLAY" ]; then
+    export WAYLAND_DISPLAY="wayland-0"
+    echo "WAYLAND_DISPLAY was not set, defaulting to \"$WAYLAND_DISPLAY\""
+else
+    echo "WAYLAND_DISPLAY is set to \"$WAYLAND_DISPLAY\""
+fi
+
+# Start the setup mode
+echo ""
+read -p "Start touchkio setup? (Y/n) " answer
+if [[ ${answer:-y} == [Yy]* ]]; then
+    echo "/usr/bin/touchkio --setup"
+    /usr/bin/touchkio --setup
+fi

main.js

@@ -1,35 +0,0 @@
-const integration = require("./src/integration");
-const hardware = require("./src/hardware");
-const webview = require("./src/webview");
-const { app } = require("electron");
-
-/**
- * This promise resolves when the app has finished initializing,
- * allowing to safely create browser windows and perform other
- * initialization tasks.
- */
-app.whenReady().then(() => {
-  const args = parseArgs(process);
-  webview.init(args) && hardware.init(args) && integration.init(args);
-});
-
-/**
- * Parses command-line arguments from the given process object.
- *
- * @param {Object} proc - The process object.
- * @returns {Object} An object mapping argument names to their corresponding values.
- */
-const parseArgs = (proc) => {
-  let argv = proc.argv.slice(1).join(" ").trim();
-  if (argv.length && argv[0] == ".") {
-    argv = argv.slice(1);
-  }
-  argv = argv.replace(/--|=/g, " ").replace(/\s+/g, " ");
-  argv = argv.trim().split(" ");
-  argv = argv.reduce(
-    (args, k, i, v) =>
-      i % 2 ? args : { ...args, [k.replace("-", "_")]: v[i + 1] },
-    {}
-  );
-  return argv;
-};

package.json

@@ -2,9 +2,9 @@
     "name": "touchkio",
     "description": "Home Assistant Touch Kiosk",
     "author": "leukipp",
-    "version": "0.0.1",
+    "version": "1.0.1",
     "license": "MIT",
-    "main": "main.js",
+    "main": "index.js",
     "scripts": {
         "start": "electron . --web-url=https://demo.home-assistant.io",
         "build": "electron-forge make"
@@ -26,8 +26,11 @@
                     "name": "@electron-forge/maker-deb",
                     "config": {
                         "options": {
+                            "productName": "TouchKio",
                             "icon": "img/icon.png",
-                            "category": "Network"
+                            "categories": [
+                                "Network"
+                            ]
                         }
                     }
                 }
@@ -46,12 +49,16 @@
             ]
         }
     },
+    "prettier": {
+        "printWidth": 120
+    },
     "devDependencies": {
         "@electron-forge/cli": "^7.6.0",
         "@electron-forge/maker-deb": "^7.6.0",
         "@electron-forge/maker-zip": "^7.6.0",
         "@electron-forge/publisher-github": "^7.6.0",
-        "electron": "^33.2.1"
+        "electron": "^33.3.1",
+        "prettier": "^3.4.2"
     },
     "dependencies": {
         "mqtt": "^5.10.3"

src/hardware.js

@@ -1,13 +1,22 @@
 const os = require("os");
 const fs = require("fs");
+const path = require("path");
 const process = require("child_process");
 
 global.HARDWARE = global.HARDWARE || {
   initialized: false,
   status: "invalid",
   display: {
-    status: null,
-    brightness: null,
+    name: null,
+    status: {
+      path: null,
+      value: null,
+    },
+    brightness: {
+      path: null,
+      value: null,
+      max: null,
+    },
     notifiers: [],
   },
 };
@@ -18,34 +27,51 @@ global.HARDWARE = global.HARDWARE || {
  * @param {Object} args - The command-line arguments to customize the initialization process.
  * @returns {boolean} Returns true if the initialization was successful.
  */
-const init = (args) => {
-  const model = getModel();
-  const valid = model && model.includes("Raspberry Pi 5");
-
-  // Check supported hardware
-  if (valid) {
-    console.log("\nModel:", getModel());
-    console.log("Serial Number:", getSerialNumber());
-    console.log("Host Name:", getHostName());
-    console.log("Up Time:", getUpTime());
-    console.log("Memory Size:", getMemorySize());
-    console.log("Memory Usage:", getMemoryUsage());
-    console.log("Processor Usage:", getProcessorUsage());
-    console.log("Processor Temperature:", getProcessorTemperature());
-    console.log("Display Status:", getDisplayStatus());
-    console.log("Display Brightness:", getDisplayBrightness(), "\n");
-
-    // Init globals
-    HARDWARE.initialized = true;
-    HARDWARE.status = "valid";
-
-    // Check for display changes
-    setInterval(update, 500);
-  } else {
-    console.warn(`Device ${model} not supported`);
+const init = async (args) => {
+  if (!args.mqtt_url) {
+    return false;
   }
 
-  return valid;
+  // Check device support
+  if (!compatibleDevice()) {
+    console.warn("Device not supported");
+    return false;
+  }
+
+  // Check model support
+  const model = getModel();
+  if (!model || !model.includes("Raspberry Pi")) {
+    console.warn(`${model} not supported`);
+    return false;
+  }
+
+  // Init globals
+  HARDWARE.display.name = getDisplayName();
+  HARDWARE.display.status.path = getDisplayStatusPath(HARDWARE.display.name);
+  HARDWARE.display.brightness.path = getDisplayBrightnessPath(HARDWARE.display.name);
+  HARDWARE.display.brightness.max = getDisplayBrightnessMax();
+  HARDWARE.initialized = true;
+  HARDWARE.status = "valid";
+
+  // Show device infos
+  console.log("\nModel:", model);
+  console.log("Serial Number:", getSerialNumber());
+  console.log("Host Name:", getHostName());
+  console.log("Up Time:", getUpTime());
+  console.log("Memory Size:", getMemorySize());
+  console.log("Memory Usage:", getMemoryUsage());
+  console.log("Processor Usage:", getProcessorUsage());
+  console.log("Processor Temperature:", getProcessorTemperature());
+
+  // Show display infos
+  console.log("\nDisplay Name:", HARDWARE.display.name);
+  console.log(`Display Status [${HARDWARE.display.status.path}]:`, getDisplayStatus());
+  console.log(`Display Brightness [${HARDWARE.display.brightness.path}]:`, getDisplayBrightness(), "\n");
+
+  // Check for display changes
+  setInterval(update, 500);
+
+  return true;
 };
 
 /**
@@ -55,29 +81,47 @@ const update = () => {
   if (!HARDWARE.initialized) {
     return;
   }
-  const path = "/sys/class/backlight/10-0045";
 
   // Display status has changed
-  const status = fs.readFileSync(`${path}/bl_power`, "utf8").trim();
-  if (status !== HARDWARE.display.status) {
-    console.log("Update Display Status:", getDisplayStatus());
-    HARDWARE.display.status = status;
-    HARDWARE.display.notifiers.forEach((notifier) => {
-      notifier();
-    });
+  if (HARDWARE.display.status.path !== null) {
+    const status = fs.readFileSync(`${HARDWARE.display.status.path}/enabled`, "utf8").trim();
+    if (status !== HARDWARE.display.status.value) {
+      console.log("Update Display Status:", getDisplayStatus());
+      HARDWARE.display.status.value = status;
+      HARDWARE.display.notifiers.forEach((notifier) => {
+        notifier();
+      });
+    }
   }
 
   // Display brightness has changed
-  const brightness = fs.readFileSync(`${path}/brightness`, "utf8").trim();
-  if (brightness !== HARDWARE.display.brightness) {
-    console.log("Update Display Brightness:", getDisplayBrightness());
-    HARDWARE.display.brightness = brightness;
-    HARDWARE.display.notifiers.forEach((notifier) => {
-      notifier();
-    });
+  if (HARDWARE.display.brightness.path !== null) {
+    const brightness = fs.readFileSync(`${HARDWARE.display.brightness.path}/brightness`, "utf8").trim();
+    if (brightness !== HARDWARE.display.brightness.value) {
+      console.log("Update Display Brightness:", getDisplayBrightness());
+      HARDWARE.display.brightness.value = brightness;
+      HARDWARE.display.notifiers.forEach((notifier) => {
+        notifier();
+      });
+    }
   }
 };
 
+/**
+ * Verifies device compatibility by checking the presence of necessary sys files.
+ *
+ * @returns {bool} Returns true if all files exists.
+ */
+const compatibleDevice = () => {
+  const files = [
+    "/sys/class/drm",
+    "/sys/class/backlight",
+    "/sys/firmware/devicetree/base/model",
+    "/sys/firmware/devicetree/base/serial-number",
+  ];
+  return files.every((file) => fs.existsSync(file));
+};
+
 /**
  * Gets the Raspberry Pi model name using `/sys/firmware/devicetree/base/model`.
  *
@@ -93,9 +137,16 @@ const getModel = () => {
  * @returns {string|null} The serial number of the Raspberry Pi or null if an error occurs.
  */
 const getSerialNumber = () => {
-  return execSyncCommand("cat", [
-    "/sys/firmware/devicetree/base/serial-number",
-  ]);
+  return execSyncCommand("cat", ["/sys/firmware/devicetree/base/serial-number"]);
+};
+
+/**
+ * Gets the host machine id using `/etc/machine-id`.
+ *
+ * @returns {string|null} The machine id of the system.
+ */
+const getMachineId = () => {
+  return execSyncCommand("cat", ["/etc/machine-id"]);
 };
 
 /**
@@ -159,6 +210,41 @@ const getProcessorTemperature = () => {
   return null;
 };
 
+/**
+ * Gets the primary display name using `wlopm`.
+ *
+ * @returns {string|null} The output of the command or null if an error occurs.
+ */
+const getDisplayName = () => {
+  const status = execSyncCommand("wlopm", []);
+  if (status !== null) {
+    const out = status.split("\n")[0].split(" ");
+    return out.shift();
+  }
+  return null;
+};
+
+/**
+ * Gets the current display status path using `/sys/class/drm`.
+ *
+ * @param {string} name - Primary display name.
+ * @returns {string|null} The display status path or null if nothing was found.
+ */
+const getDisplayStatusPath = (name) => {
+  const drm = "/sys/class/drm";
+  for (const card of fs.readdirSync(drm)) {
+    const statusFile = path.join(drm, card, "status");
+    if (!fs.existsSync(statusFile)) {
+      continue;
+    }
+    const content = fs.readFileSync(statusFile, "utf8").trim();
+    if (card.includes(name) && content === "connected") {
+      return path.join(drm, card);
+    }
+  }
+  return null;
+};
+
 /**
  * Gets the current display power status using `wlopm`.
  *
@@ -167,18 +253,10 @@ const getProcessorTemperature = () => {
 const getDisplayStatus = () => {
   const status = execSyncCommand("wlopm", []);
   if (status !== null) {
-    return status.slice(status.lastIndexOf(" ") + 1).toUpperCase();
+    const out = status.split("\n")[0].split(" ");
+    return out.pop().toUpperCase();
   }
   return null;
-
-  /* This also works, but it's better to use `wlopm` for getter and setter methods.
-  const status = execSyncCommand("cat", [
-    "/sys/class/backlight/10-0045/bl_power",
-  ]);
-  if (status !== null) {
-    return status === "0" ? "ON" : "OFF";
-  }
-  */
 };
 
 /**
@@ -192,64 +270,89 @@ const getDisplayStatus = () => {
  */
 const setDisplayStatus = (status, callback = null) => {
   if (status !== "ON" && status !== "OFF") {
-    console.error("Status must be 'ON' or 'OFF'.");
-    if (typeof callback === "function") callback(null, "Invalid status.");
+    console.error("Status must be 'ON' or 'OFF'");
+    if (typeof callback === "function") callback(null, "Invalid status");
     return;
   }
-  const args = status === "ON" ? ["--on", "*"] : ["--off", "*"];
+  const args = [`--${status.toLowerCase()}`, HARDWARE.display.name];
   execAsyncCommand("wlopm", args, callback);
-
-  /* This also works, but interferes with the built-in screen blanking function.
-  const value = status === "ON" ? "0" : "4";
-  const proc = execAsyncCommand(
-    "tee",
-    ["/sys/class/backlight/10-0045/bl_power"],
-    callback
-  );
-  proc.stdin.write(value.toString());
-  proc.stdin.end();
-  */
 };
 
 /**
- * Gets the current display brightness level using `/sys/class/backlight/10-0045/brightness`.
+ * Gets the current display brightness path using `/sys/class/backlight`.
  *
- * This function retrieves the brightness level, which is in the range of 0-31,
- * and maps it to a percentage in the range of 0-100 percent.
- *
- * @returns {number|null} The brightness level as a percentage or null if an error occurs.
+ * @param {string} name - Primary display name.
+ * @returns {string|null} The display brightness path or null if nothing was found.
  */
-const getDisplayBrightness = () => {
-  const brightness = execSyncCommand("cat", [
-    "/sys/class/backlight/10-0045/brightness",
-  ]);
-  if (brightness !== null) {
-    return Math.round((parseInt(brightness, 10) / 31) * 100);
+const getDisplayBrightnessPath = (name) => {
+  const backlight = "/sys/class/backlight";
+  for (const address of fs.readdirSync(backlight)) {
+    const nameFile = path.join(backlight, address, "display_name");
+    if (!fs.existsSync(nameFile)) {
+      continue;
+    }
+    const content = fs.readFileSync(nameFile, "utf8").trim();
+    if (content.includes(name)) {
+      return path.join(backlight, address);
+    }
   }
   return null;
 };
 
 /**
- * Sets the display brightness level using `/sys/class/backlight/10-0045/brightness`.
+ * Gets the maximum display brightness value using `/sys/class/backlight/.../max_brightness`.
  *
- * This function takes a brightness value in the range of 1-100 percent,
- * maps it to the range of 0-31, and writes it to the system.
+ * @returns {number|null} The brightness maximum value or null if an error occurs.
+ */
+const getDisplayBrightnessMax = () => {
+  if (!HARDWARE.display.brightness.path) {
+    return null;
+  }
+  const max = execSyncCommand("cat", [`${HARDWARE.display.brightness.path}/max_brightness`]);
+  if (max !== null) {
+    return parseInt(max, 10);
+  }
+  return null;
+};
+
+/**
+ * Gets the current display brightness level using `/sys/class/backlight/.../brightness`.
+ *
+ * @returns {number|null} The brightness level as a percentage or null if an error occurs.
+ */
+const getDisplayBrightness = () => {
+  if (!HARDWARE.display.brightness.path) {
+    return null;
+  }
+  const brightness = execSyncCommand("cat", [`${HARDWARE.display.brightness.path}/brightness`]);
+  if (brightness !== null) {
+    const max = HARDWARE.display.brightness.max;
+    return Math.round((parseInt(brightness, 10) / max) * 100);
+  }
+  return null;
+};
+
+/**
+ * Sets the display brightness level using `/sys/class/backlight/.../brightness`.
+ *
+ * This function takes a brightness value between 1 to 100 percent,
+ * maps it to the proper range and writes it to the system.
  *
  * @param {number} brightness - The desired brightness level (1-100).
  * @param {function} callback - A callback function that receives the output or error.
  */
 const setDisplayBrightness = (brightness, callback = null) => {
-  if (typeof brightness !== "number" || brightness < 1 || brightness > 100) {
-    console.error("Brightness must be a number between 1 and 100.");
-    if (typeof callback === "function") callback(null, "Invalid brightness.");
+  if (!HARDWARE.display.brightness.path) {
     return;
   }
-  const value = Math.max(1, Math.min(Math.round((brightness / 100) * 31), 31));
-  const proc = execAsyncCommand(
-    "tee",
-    ["/sys/class/backlight/10-0045/brightness"],
-    callback
-  );
+  if (typeof brightness !== "number" || brightness < 1 || brightness > 100) {
+    console.error("Brightness must be a number between 1 and 100");
+    if (typeof callback === "function") callback(null, "Invalid brightness");
+    return;
+  }
+  const max = HARDWARE.display.brightness.max;
+  const value = Math.max(1, Math.min(Math.round((brightness / 100) * max), max));
+  const proc = execAsyncCommand("tee", [`${HARDWARE.display.brightness.path}/brightness`], callback);
   proc.stdin.write(value.toString());
   proc.stdin.end();
 };
@@ -287,9 +390,7 @@ const rebootSystem = (callback = null) => {
  */
 const execSyncCommand = (cmd, args = []) => {
   try {
-    const output = process.execSync([cmd, ...args].join(" "), {
-      encoding: "utf8",
-    });
+    const output = process.execSync([cmd, ...args].join(" "), { encoding: "utf8" });
     return output.trim().replace(/\0/g, "");
   } catch (error) {
     console.error("Execute Sync:", error.message);
@@ -340,14 +441,19 @@ module.exports = {
   update,
   getModel,
   getSerialNumber,
+  getMachineId,
   getHostName,
   getUpTime,
   getMemorySize,
   getMemoryUsage,
   getProcessorUsage,
   getProcessorTemperature,
+  getDisplayName,
+  getDisplayStatusPath,
   getDisplayStatus,
   setDisplayStatus,
+  getDisplayBrightnessPath,
+  getDisplayBrightnessMax,
   getDisplayBrightness,
   setDisplayBrightness,
   shutdownSystem,

src/integration.js

@@ -13,7 +13,7 @@ global.INTEGRATION = global.INTEGRATION || {
  * @param {Object} args - The command-line arguments to customize the initialization process.
  * @returns {boolean} Returns true if the initialization was successful.
  */
-const init = (args) => {
+const init = async (args) => {
   if (!args.mqtt_url) {
     return false;
   }
@@ -90,12 +90,12 @@ const init = (args) => {
     updateDisplay(INTEGRATION.client);
   });
 
-  // Update heartbeat time periodically
+  // Update heartbeat time periodically (30s)
   setInterval(() => {
     updateHeartbeat(INTEGRATION.client);
   }, 30 * 1000);
 
-  // Update sensor states periodically
+  // Update sensor states periodically (1min)
   setInterval(update, 60 * 1000);
 
   return true;
@@ -124,18 +124,15 @@ const update = () => {
  */
 const initShutdown = (client) => {
   const root = `${INTEGRATION.discovery}/button/${INTEGRATION.node}/shutdown`;
+  const config = {
+    name: "Shutdown",
+    unique_id: `${INTEGRATION.node}_shutdown`,
+    command_topic: `${root}/execute`,
+    icon: "mdi:power",
+    device: INTEGRATION.device,
+  };
   client
-    .publish(
-      `${root}/config`,
-      JSON.stringify({
-        name: "Shutdown",
-        unique_id: `${INTEGRATION.node}_shutdown`,
-        command_topic: `${root}/execute`,
-        icon: "mdi:power",
-        device: INTEGRATION.device,
-      }),
-      { qos: 1, retain: true }
-    )
+    .publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true })
     .on("message", (topic, message) => {
       if (topic === `${root}/execute`) {
         console.log("Shutdown system...");
@@ -153,18 +150,15 @@ const initShutdown = (client) => {
  */
 const initReboot = (client) => {
   const root = `${INTEGRATION.discovery}/button/${INTEGRATION.node}/reboot`;
+  const config = {
+    name: "Reboot",
+    unique_id: `${INTEGRATION.node}_reboot`,
+    command_topic: `${root}/execute`,
+    icon: "mdi:restart",
+    device: INTEGRATION.device,
+  };
   client
-    .publish(
-      `${root}/config`,
-      JSON.stringify({
-        name: "Reboot",
-        unique_id: `${INTEGRATION.node}_reboot`,
-        command_topic: `${root}/execute`,
-        icon: "mdi:restart",
-        device: INTEGRATION.device,
-      }),
-      { qos: 1, retain: true }
-    )
+    .publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true })
     .on("message", (topic, message) => {
       if (topic === `${root}/execute`) {
         console.log("Rebooting system...");
@@ -182,21 +176,18 @@ const initReboot = (client) => {
  */
 const initRefresh = (client) => {
   const root = `${INTEGRATION.discovery}/button/${INTEGRATION.node}/refresh`;
+  const config = {
+    name: "Refresh",
+    unique_id: `${INTEGRATION.node}_refresh`,
+    command_topic: `${root}/execute`,
+    icon: "mdi:web-refresh",
+    device: INTEGRATION.device,
+  };
   client
-    .publish(
-      `${root}/config`,
-      JSON.stringify({
-        name: "Refresh",
-        unique_id: `${INTEGRATION.node}_refresh`,
-        command_topic: `${root}/execute`,
-        icon: "mdi:web-refresh",
-        device: INTEGRATION.device,
-      }),
-      { qos: 1, retain: true }
-    )
+    .publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true })
     .on("message", (topic, message) => {
       if (topic === `${root}/execute`) {
-        console.log("Refresh webview...");
+        console.log("Refreshing webview...");
         hardware.setDisplayStatus("ON");
         WEBVIEW.view.webContents.reloadIgnoringCache();
       }
@@ -211,27 +202,18 @@ const initRefresh = (client) => {
  */
 const initKiosk = (client) => {
   const root = `${INTEGRATION.discovery}/select/${INTEGRATION.node}/kiosk`;
+  const config = {
+    name: `Kiosk`,
+    unique_id: `${INTEGRATION.node}_kiosk`,
+    command_topic: `${root}/set`,
+    state_topic: `${root}/status`,
+    value_template: "{{ value }}",
+    options: ["Framed", "Fullscreen", "Maximized", "Minimized", "Terminated"],
+    icon: "mdi:overscan",
+    device: INTEGRATION.device,
+  };
   client
-    .publish(
-      `${root}/config`,
-      JSON.stringify({
-        name: `Kiosk`,
-        unique_id: `${INTEGRATION.node}_kiosk`,
-        command_topic: `${root}/set`,
-        state_topic: `${root}/status`,
-        value_template: "{{ value }}",
-        options: [
-          "Framed",
-          "Fullscreen",
-          "Maximized",
-          "Minimized",
-          "Terminated",
-        ],
-        icon: "mdi:overscan",
-        device: INTEGRATION.device,
-      }),
-      { qos: 1, retain: true }
-    )
+    .publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true })
     .on("message", (topic, message) => {
       if (topic === `${root}/set`) {
         const status = message.toString();
@@ -275,10 +257,9 @@ const initKiosk = (client) => {
 const updateKiosk = (client) => {
   const kiosk = WEBVIEW.status;
   const root = `${INTEGRATION.discovery}/select/${INTEGRATION.node}/kiosk`;
-  client.publish(`${root}/status`, `${kiosk}`, {
-    qos: 1,
-    retain: true,
-  });
+  if (kiosk !== null) {
+    client.publish(`${root}/status`, `${kiosk}`, { qos: 1, retain: true });
+  }
 };
 
 /**
@@ -288,23 +269,22 @@ const updateKiosk = (client) => {
  */
 const initDisplay = (client) => {
   const root = `${INTEGRATION.discovery}/light/${INTEGRATION.node}/display`;
+  const config = {
+    name: `Display`,
+    unique_id: `${INTEGRATION.node}_display`,
+    command_topic: `${root}/set`,
+    state_topic: `${root}/status`,
+    icon: "mdi:monitor-shimmer",
+    platform: "light",
+    device: INTEGRATION.device,
+  };
+  if (HARDWARE.display.brightness.path !== null) {
+    config.brightness_scale = 100;
+    config.brightness_command_topic = `${root}/brightness/set`;
+    config.brightness_state_topic = `${root}/brightness/status`;
+  }
   client
-    .publish(
-      `${root}/config`,
-      JSON.stringify({
-        name: `Display`,
-        unique_id: `${INTEGRATION.node}_display`,
-        command_topic: `${root}/set`,
-        state_topic: `${root}/status`,
-        brightness_command_topic: `${root}/brightness/set`,
-        brightness_state_topic: `${root}/brightness/status`,
-        brightness_scale: 100,
-        icon: "mdi:monitor-shimmer",
-        platform: "light",
-        device: INTEGRATION.device,
-      }),
-      { qos: 1, retain: true }
-    )
+    .publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true })
     .on("message", (topic, message) => {
       if (topic === `${root}/set`) {
         const status = message.toString();
@@ -330,14 +310,12 @@ const updateDisplay = (client) => {
   const status = hardware.getDisplayStatus();
   const brightness = hardware.getDisplayBrightness();
   const root = `${INTEGRATION.discovery}/light/${INTEGRATION.node}/display`;
-  client.publish(`${root}/status`, `${status}`, {
-    qos: 1,
-    retain: true,
-  });
-  client.publish(`${root}/brightness/status`, `${brightness}`, {
-    qos: 1,
-    retain: true,
-  });
+  if (status !== null) {
+    client.publish(`${root}/status`, `${status}`, { qos: 1, retain: true });
+  }
+  if (brightness !== null) {
+    client.publish(`${root}/brightness/status`, `${brightness}`, { qos: 1, retain: true });
+  }
 };
 
 /**
@@ -347,18 +325,15 @@ const updateDisplay = (client) => {
  */
 const initModel = (client) => {
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/model`;
-  client.publish(
-    `${root}/config`,
-    JSON.stringify({
-      name: `Model`,
-      unique_id: `${INTEGRATION.node}_model`,
-      state_topic: `${root}/status`,
-      value_template: "{{ value }}",
-      icon: "mdi:raspberry-pi",
-      device: INTEGRATION.device,
-    }),
-    { qos: 1, retain: true }
-  );
+  const config = {
+    name: `Model`,
+    unique_id: `${INTEGRATION.node}_model`,
+    state_topic: `${root}/status`,
+    value_template: "{{ value }}",
+    icon: "mdi:raspberry-pi",
+    device: INTEGRATION.device,
+  };
+  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
   updateModel(client);
 };
 
@@ -370,10 +345,9 @@ const initModel = (client) => {
 const updateModel = (client) => {
   const model = hardware.getModel();
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/model`;
-  client.publish(`${root}/status`, `${model}`, {
-    qos: 1,
-    retain: true,
-  });
+  if (model !== null) {
+    client.publish(`${root}/status`, `${model}`, { qos: 1, retain: true });
+  }
 };
 
 /**
@@ -383,18 +357,15 @@ const updateModel = (client) => {
  */
 const initSerialNumber = (client) => {
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/serial_number`;
-  client.publish(
-    `${root}/config`,
-    JSON.stringify({
-      name: `Serial Number`,
-      unique_id: `${INTEGRATION.node}_serial_number`,
-      state_topic: `${root}/status`,
-      value_template: "{{ value }}",
-      icon: "mdi:hexadecimal",
-      device: INTEGRATION.device,
-    }),
-    { qos: 1, retain: true }
-  );
+  const config = {
+    name: `Serial Number`,
+    unique_id: `${INTEGRATION.node}_serial_number`,
+    state_topic: `${root}/status`,
+    value_template: "{{ value }}",
+    icon: "mdi:hexadecimal",
+    device: INTEGRATION.device,
+  };
+  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
   updateSerialNumber(client);
 };
 
@@ -406,10 +377,9 @@ const initSerialNumber = (client) => {
 const updateSerialNumber = (client) => {
   const serialNumber = hardware.getSerialNumber();
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/serial_number`;
-  client.publish(`${root}/status`, `${serialNumber}`, {
-    qos: 1,
-    retain: true,
-  });
+  if (serialNumber !== null) {
+    client.publish(`${root}/status`, `${serialNumber}`, { qos: 1, retain: true });
+  }
 };
 
 /**
@@ -419,18 +389,15 @@ const updateSerialNumber = (client) => {
  */
 const initHostName = (client) => {
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/host_name`;
-  client.publish(
-    `${root}/config`,
-    JSON.stringify({
-      name: `Host Name`,
-      unique_id: `${INTEGRATION.node}_host_name`,
-      state_topic: `${root}/status`,
-      value_template: "{{ value }}",
-      icon: "mdi:console-network",
-      device: INTEGRATION.device,
-    }),
-    { qos: 1, retain: true }
-  );
+  const config = {
+    name: `Host Name`,
+    unique_id: `${INTEGRATION.node}_host_name`,
+    state_topic: `${root}/status`,
+    value_template: "{{ value }}",
+    icon: "mdi:console-network",
+    device: INTEGRATION.device,
+  };
+  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
   updateHostName(client);
 };
 
@@ -442,10 +409,9 @@ const initHostName = (client) => {
 const updateHostName = (client) => {
   const hostName = hardware.getHostName();
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/host_name`;
-  client.publish(`${root}/status`, `${hostName}`, {
-    qos: 1,
-    retain: true,
-  });
+  if (hostName !== null) {
+    client.publish(`${root}/status`, `${hostName}`, { qos: 1, retain: true });
+  }
 };
 
 /**
@@ -455,19 +421,16 @@ const updateHostName = (client) => {
  */
 const initUpTime = (client) => {
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/up_time`;
-  client.publish(
-    `${root}/config`,
-    JSON.stringify({
-      name: `Up Time`,
-      unique_id: `${INTEGRATION.node}_up_time`,
-      state_topic: `${root}/status`,
-      value_template: "{{ (value | float) | round(0) }}",
-      unit_of_measurement: "min",
-      icon: "mdi:timeline-clock",
-      device: INTEGRATION.device,
-    }),
-    { qos: 1, retain: true }
-  );
+  const config = {
+    name: `Up Time`,
+    unique_id: `${INTEGRATION.node}_up_time`,
+    state_topic: `${root}/status`,
+    value_template: "{{ (value | float) | round(0) }}",
+    unit_of_measurement: "min",
+    icon: "mdi:timeline-clock",
+    device: INTEGRATION.device,
+  };
+  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
   updateUpTime(client);
 };
 
@@ -479,10 +442,9 @@ const initUpTime = (client) => {
 const updateUpTime = (client) => {
   const upTime = hardware.getUpTime();
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/up_time`;
-  client.publish(`${root}/status`, `${upTime}`, {
-    qos: 1,
-    retain: true,
-  });
+  if (upTime !== null) {
+    client.publish(`${root}/status`, `${upTime}`, { qos: 1, retain: true });
+  }
 };
 
 /**
@@ -492,19 +454,16 @@ const updateUpTime = (client) => {
  */
 const initMemorySize = (client) => {
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/memory_size`;
-  client.publish(
-    `${root}/config`,
-    JSON.stringify({
-      name: `Memory Size`,
-      unique_id: `${INTEGRATION.node}_memory_size`,
-      state_topic: `${root}/status`,
-      value_template: "{{ (value | float) | round(2) }}",
-      unit_of_measurement: "GiB",
-      icon: "mdi:memory",
-      device: INTEGRATION.device,
-    }),
-    { qos: 1, retain: true }
-  );
+  const config = {
+    name: `Memory Size`,
+    unique_id: `${INTEGRATION.node}_memory_size`,
+    state_topic: `${root}/status`,
+    value_template: "{{ (value | float) | round(2) }}",
+    unit_of_measurement: "GiB",
+    icon: "mdi:memory",
+    device: INTEGRATION.device,
+  };
+  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
   updateMemorySize(client);
 };
 
@@ -516,10 +475,9 @@ const initMemorySize = (client) => {
 const updateMemorySize = (client) => {
   const memorySize = hardware.getMemorySize();
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/memory_size`;
-  client.publish(`${root}/status`, `${memorySize}`, {
-    qos: 1,
-    retain: true,
-  });
+  if (memorySize !== null) {
+    client.publish(`${root}/status`, `${memorySize}`, { qos: 1, retain: true });
+  }
 };
 
 /**
@@ -529,19 +487,16 @@ const updateMemorySize = (client) => {
  */
 const initMemoryUsage = (client) => {
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/memory_usage`;
-  client.publish(
-    `${root}/config`,
-    JSON.stringify({
-      name: `Memory Usage`,
-      unique_id: `${INTEGRATION.node}_memory_usage`,
-      state_topic: `${root}/status`,
-      value_template: "{{ (value | float) | round(0) }}",
-      unit_of_measurement: "%",
-      icon: "mdi:memory-arrow-down",
-      device: INTEGRATION.device,
-    }),
-    { qos: 1, retain: true }
-  );
+  const config = {
+    name: `Memory Usage`,
+    unique_id: `${INTEGRATION.node}_memory_usage`,
+    state_topic: `${root}/status`,
+    value_template: "{{ (value | float) | round(0) }}",
+    unit_of_measurement: "%",
+    icon: "mdi:memory-arrow-down",
+    device: INTEGRATION.device,
+  };
+  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
   updateMemoryUsage(client);
 };
 
@@ -553,10 +508,9 @@ const initMemoryUsage = (client) => {
 const updateMemoryUsage = (client) => {
   const memoryUsage = hardware.getMemoryUsage();
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/memory_usage`;
-  client.publish(`${root}/status`, `${memoryUsage}`, {
-    qos: 1,
-    retain: true,
-  });
+  if (memoryUsage !== null) {
+    client.publish(`${root}/status`, `${memoryUsage}`, { qos: 1, retain: true });
+  }
 };
 
 /**
@@ -566,19 +520,16 @@ const updateMemoryUsage = (client) => {
  */
 const initProcessorUsage = (client) => {
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/processor_usage`;
-  client.publish(
-    `${root}/config`,
-    JSON.stringify({
-      name: `Processor Usage`,
-      unique_id: `${INTEGRATION.node}_processor_usage`,
-      state_topic: `${root}/status`,
-      value_template: "{{ (value | float) | round(0) }}",
-      unit_of_measurement: "%",
-      icon: "mdi:cpu-64-bit",
-      device: INTEGRATION.device,
-    }),
-    { qos: 1, retain: true }
-  );
+  const config = {
+    name: `Processor Usage`,
+    unique_id: `${INTEGRATION.node}_processor_usage`,
+    state_topic: `${root}/status`,
+    value_template: "{{ (value | float) | round(0) }}",
+    unit_of_measurement: "%",
+    icon: "mdi:cpu-64-bit",
+    device: INTEGRATION.device,
+  };
+  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
   updateProcessorUsage(client);
 };
 
@@ -590,10 +541,9 @@ const initProcessorUsage = (client) => {
 const updateProcessorUsage = (client) => {
   const processorUsage = hardware.getProcessorUsage();
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/processor_usage`;
-  client.publish(`${root}/status`, `${processorUsage}`, {
-    qos: 1,
-    retain: true,
-  });
+  if (processorUsage !== null) {
+    client.publish(`${root}/status`, `${processorUsage}`, { qos: 1, retain: true });
+  }
 };
 
 /**
@@ -603,19 +553,16 @@ const updateProcessorUsage = (client) => {
  */
 const initProcessorTemperature = (client) => {
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/processor_temperature`;
-  client.publish(
-    `${root}/config`,
-    JSON.stringify({
-      name: `Processor Temperature`,
-      unique_id: `${INTEGRATION.node}_processor_temperature`,
-      state_topic: `${root}/status`,
-      value_template: "{{ (value | float) | round(0) }}",
-      unit_of_measurement: "°C",
-      icon: "mdi:radiator",
-      device: INTEGRATION.device,
-    }),
-    { qos: 1, retain: true }
-  );
+  const config = {
+    name: `Processor Temperature`,
+    unique_id: `${INTEGRATION.node}_processor_temperature`,
+    state_topic: `${root}/status`,
+    value_template: "{{ (value | float) | round(0) }}",
+    unit_of_measurement: "°C",
+    icon: "mdi:radiator",
+    device: INTEGRATION.device,
+  };
+  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
   updateProcessorTemperature(client);
 };
 
@@ -627,10 +574,9 @@ const initProcessorTemperature = (client) => {
 const updateProcessorTemperature = (client) => {
   const processorTemperature = hardware.getProcessorTemperature();
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/processor_temperature`;
-  client.publish(`${root}/status`, `${processorTemperature}`, {
-    qos: 1,
-    retain: true,
-  });
+  if (processorTemperature !== null) {
+    client.publish(`${root}/status`, `${processorTemperature}`, { qos: 1, retain: true });
+  }
 };
 
 /**
@@ -640,18 +586,15 @@ const updateProcessorTemperature = (client) => {
  */
 const initHeartbeat = (client) => {
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/heartbeat`;
-  client.publish(
-    `${root}/config`,
-    JSON.stringify({
-      name: `Heartbeat`,
-      unique_id: `${INTEGRATION.node}_heartbeat`,
-      state_topic: `${root}/status`,
-      value_template: "{{ value }}",
-      icon: "mdi:heart-flash",
-      device: INTEGRATION.device,
-    }),
-    { qos: 1, retain: true }
-  );
+  const config = {
+    name: `Heartbeat`,
+    unique_id: `${INTEGRATION.node}_heartbeat`,
+    state_topic: `${root}/status`,
+    value_template: "{{ value }}",
+    icon: "mdi:heart-flash",
+    device: INTEGRATION.device,
+  };
+  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
   updateHeartbeat(client);
 };
 
@@ -665,10 +608,7 @@ const updateHeartbeat = (client) => {
   const local = new Date(now.getTime() - now.getTimezoneOffset() * 60 * 1000);
   const heartbeat = local.toISOString().replace(/\.\d{3}Z$/, "");
   const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/heartbeat`;
-  client.publish(`${root}/status`, `${heartbeat}`, {
-    qos: 1,
-    retain: true,
-  });
+  client.publish(`${root}/status`, `${heartbeat}`, { qos: 1, retain: true });
 };
 
 module.exports = {

src/webview.js

@@ -15,21 +15,19 @@ global.WEBVIEW = global.WEBVIEW || {
  * @param {Object} args - The command-line arguments to customize the initialization process.
  * @returns {boolean} Returns true if the initialization was successful.
  */
-const init = (args) => {
+const init = async (args) => {
   if (!args.web_url) {
-    console.error("Please provide the '--web-url' parameter.");
+    console.error("Please provide the '--web-url' parameter");
     return app.quit();
   }
   const url = new URL(args.web_url);
   const theme = args.web_theme ? args.web_theme : "dark";
   const zoom = args.web_zoom ? parseFloat(args.web_zoom) : 1.25;
 
-  // Set app theme and name
-  nativeTheme.themeSource = theme;
-  app.setName("TouchKio");
-
   // Init global root window
+  nativeTheme.themeSource = theme;
   WEBVIEW.window = new BaseWindow({
+    title: `TouchKio - ${url.host}`,
     icon: path.join(__dirname, "..", "img", "icon.png"),
   });
   WEBVIEW.window.setMenuBarVisibility(false);
@@ -95,7 +93,7 @@ const windowEvents = (window, zoom) => {
       window.blur();
     }
     /* This also works, but it doesn't allow to react for screen wake up.
-    window.setIgnoreMouseEvents(getDisplayStatus() === "OFF");
+    window.setIgnoreMouseEvents(hardware.getDisplayStatus() === "OFF");
     */
   });
   window.on("focus", () => {
@@ -106,18 +104,28 @@ const windowEvents = (window, zoom) => {
     WEBVIEW.locked = false;
   });
 
-  // Update window status
+  // Handle window status updates
   window.on("minimize", update);
   window.on("restore", update);
   window.on("maximize", update);
   window.on("unmaximize", update);
   window.on("enter-full-screen", update);
   window.on("leave-full-screen", update);
+
+  // Handle signal and exit events
   process.on("SIGINT", app.quit);
   app.on("before-quit", () => {
     WEBVIEW.status = "Terminated";
     integration.update();
   });
+
+  // Handle multiple instances
+  app.on("second-instance", () => {
+    if (window.isMinimized()) {
+      window.restore();
+    }
+    window.focus();
+  });
 };
 
 /**
@@ -128,13 +136,10 @@ const windowEvents = (window, zoom) => {
 const viewEvents = (view) => {
   // Enable webview touch emulation
   view.webContents.debugger.attach("1.1");
-  view.webContents.debugger.sendCommand(
-    "Emulation.setEmitTouchEventsForMouse",
-    {
-      enabled: true,
-      configuration: "mobile",
-    }
-  );
+  view.webContents.debugger.sendCommand("Emulation.setEmitTouchEventsForMouse", {
+    enabled: true,
+    configuration: "mobile",
+  });
 
   // Disable webview hyperlinks
   view.webContents.setWindowOpenHandler(() => {

yarn.lock

@@ -246,9 +246,9 @@
   optionalDependencies:
     global-agent "^3.0.0"
 
-"@electron/node-gyp@git+https://github.com/electron/node-gyp.git#06b29aafb7708acef8b3669835c8a7857ebc92d2":
+"@electron/node-gyp@https://github.com/electron/node-gyp#06b29aafb7708acef8b3669835c8a7857ebc92d2":
   version "10.2.0-electron.1"
-  resolved "git+https://github.com/electron/node-gyp.git#06b29aafb7708acef8b3669835c8a7857ebc92d2"
+  resolved "https://github.com/electron/node-gyp#06b29aafb7708acef8b3669835c8a7857ebc92d2"
   dependencies:
     env-paths "^2.2.0"
     exponential-backoff "^3.1.1"
@@ -1129,10 +1129,10 @@ electron-installer-debian@^3.2.0:
     word-wrap "^1.2.3"
     yargs "^16.0.2"
 
-electron@^33.2.1:
-  version "33.2.1"
-  resolved "https://registry.yarnpkg.com/electron/-/electron-33.2.1.tgz#d0d7bba7a7abf4f14881d0a6e03c498b301a2d5f"
-  integrity sha512-SG/nmSsK9Qg1p6wAW+ZfqU+AV8cmXMTIklUL18NnOKfZLlum4ZsDoVdmmmlL39ZmeCaq27dr7CgslRPahfoVJg==
+electron@^33.3.1:
+  version "33.3.1"
+  resolved "https://registry.yarnpkg.com/electron/-/electron-33.3.1.tgz#26d63b3a110c4a9db639c33633bf806f91b4f649"
+  integrity sha512-Z7l2bVgpdKxHQMI4i0CirBX2n+iCYKOx5mbzNM3BpOyFELwlobEXKmzCmEnwP+3EcNeIhUQyIEBFQxN06QgdIw==
   dependencies:
     "@electron/get" "^2.0.0"
     "@types/node" "^20.9.0"
@@ -2396,6 +2396,11 @@ postject@^1.0.0-alpha.6:
   dependencies:
     commander "^9.4.0"
 
+prettier@^3.4.2:
+  version "3.4.2"
+  resolved "https://registry.yarnpkg.com/prettier/-/prettier-3.4.2.tgz#a5ce1fb522a588bf2b78ca44c6e6fe5aa5a2b13f"
+  integrity sha512-e9MewbtFo+Fevyuxn/4rrcDAaq0IYxPGLvObpQjiZBMAzB9IGmzlnG9RZy3FFas+eBMu2vA0CszMeduow5dIuQ==
+
 proc-log@^2.0.1:
   version "2.0.1"
   resolved "https://registry.yarnpkg.com/proc-log/-/proc-log-2.0.1.tgz#8f3f69a1f608de27878f91f5c688b225391cb685"