build: update version

docs: update readme
docs: update hardware
2025-10-10 21:29:38 +02:00 · 2025-10-10 19:11:29 +02:00 · 2025-10-10 19:10:43 +02:00 · 2025-10-10 19:08:29 +02:00 · 2025-10-09 14:19:57 +02:00 · 2025-10-09 13:43:20 +02:00
21 changed files with 5340 additions and 2593 deletions
@@ -0,0 +1 @@
 github: leukipp
@@ -1,3 +1,4 @@
 node_modules/
 docs/
 out/
 build.json
@@ -1,20 +1,20 @@
 # Supported Hardware
-This document contains an incomplete list of device and display hardware combinations that are either intended to be tested or have already been tested.
+This document contains an incomplete list of device and display hardware combinations that have already been tested.
 The [release](https://github.com/leukipp/touchkio/releases) page has builds exclusively for **arm64** and **x64**, but custom builds for other architectures can be made (see [development](https://github.com/leukipp/touchkio?tab=readme-ov-file#development)), allowing the application to operate on any hardware.
 At least the **minimal** features, such as displaying a **kiosk window** (which doesn't necessarily need to be Home Assistant) will work.
 ## Hardware
-If you are running Linux with a graphical user interface (Wayland or X11), you should be well equipped to use the application. Additionally, any single board computer (SBC) clones of the Raspberry Pi that operate on Raspberry Pi OS **(64-bit)** are likely to function properly as well.
+If you are running Linux with a graphical user interface (Wayland or X11), you should be well equipped to use the application. Additionally, any single board computer (SBC) clones of the Raspberry Pi that operate on Raspberry Pi OS **(64-bit)** are likely to function as well.
 |     | Status                | Notes                                                                     |
 | --- | --------------------- | ------------------------------------------------------------------------- |
 | ⬜   | Unknown               | Who knows.                                                                |
 | 🟩   | Fully operational     | Working display power, brightness and keyboard control via MQTT.          |
 | 🟨   | Partially operational | Display brightness control is not available via MQTT.                     |
 | 🟧   | Partially operational | Display brightness and keyboard control is not available via MQTT.        |
 | 🟥   | Partially operational | Display power, brightness and keyboard control is not available via MQTT. |
-| ⬛   | Crashed               | The house is on fire.                                                     |
+| ⬜   | Somehow operational   | Issues can occur and the overall performance is very slow.                |
 | ⬛   | Not operational       | The house is on fire.                                                     |
 ### DSI
 | Device                 | System                                 | Display                                                                                                   | Status |
@@ -27,18 +27,64 @@ If you are running Linux with a graphical user interface (Wayland or X11), you s
 | Raspberry Pi 5 (arm64) | Raspberry Pi OS (64-bit), Wayland, X11 | [Official 7" Touch Display 2 (720x1280)](https://www.raspberrypi.com/products/touch-display-2/)           | 🟩      |
 ### HDMI
-| Device                 | System                                 | Display                                                                          | Status |
+| Device                    | System                                 | Display                                                                                                               | Status |
-| ---------------------- | -------------------------------------- | -------------------------------------------------------------------------------- | ------ |
+| ------------------------- | -------------------------------------- | --------------------------------------------------------------------------------------------------------------------- | ------ |
-| Raspberry Pi 4 (arm64) | Raspberry Pi OS (64-bit), Wayland, X11 | [LAFVIN 5" Touch Display (800x480)](https://www.amazon.de/gp/product/B0BWJ8YP7S) | 🟨      |
+| Raspberry Pi 4 (arm64)    | Raspberry Pi OS (64-bit), Wayland, X11 | [LAFVIN Touch Display 5" (800x480)](https://www.amazon.de/gp/product/B0BWJ8YP7S)                                      | 🟨      |
-| Raspberry Pi 5 (arm64) | Raspberry Pi OS (64-bit), Wayland, X11 | [GeeekPi 10.1" Capacitive Touch (1280x800)](https://www.amazon.nl/dp/B0DHV6DZC1) | 🟨      |
+| Raspberry Pi 4 (arm64)    | Raspberry Pi OS (64-bit), Wayland, X11 | [Waveshare 7EP-CAPLCD 7" (1280x800)](https://www.waveshare.com/7ep-caplcd.htm)                                        | 🟨      |
-| Raspberry Pi 5 (arm64) | Raspberry Pi OS (64-bit), Wayland, X11 | Generic Non-Touch                                                                | 🟨      |
+| Raspberry Pi 4 (arm64)    | Raspberry Pi OS (64-bit), Wayland, X11 | [Waveshare CAPLCD 8" (768x1024)](https://www.waveshare.com/wiki/8inch_768x1024_LCD)                                   | 🟨      |
-| Generic PC (x64)       | Ubuntu (64-bit), X11                   | Generic Non-Touch                                                                | 🟧      |
+| Raspberry Pi 4 (arm64)    | Raspberry Pi OS (64-bit), Wayland, X11 | [Hannspree HT225 21.5" (1920x1080)](https://www.hannspree.eu/product/HT-225-HPB)                                      | 🟨      |
-| Generic PC (x64)       | Ubuntu (64-bit), Wayland               | Generic Non-Touch                                                                | 🟥      |
+| Raspberry Pi CM 4 (arm64) | Raspberry Pi OS (64-bit), Wayland, X11 | [Lenovo ThinkCentre 23.8" (1920x1080)](https://psref.lenovo.com/Detail/ThinkCentre_Tiny_In_One_24_Gen_5?M=12NBGAT1EU) | 🟨      |
 | Raspberry Pi 400 (arm64)  | Raspberry Pi OS (64-bit), Wayland, X11 | [UPerfect Vertical Touch 15.6" (1920x1080)](https://uperfect.com/products/uperfect-y-vertical-monitor-15-6)           | 🟨      |
 | Raspberry Pi 5 (arm64)    | Raspberry Pi OS (64-bit), Wayland, X11 | [GeeekPi Capacitive Touch 10.1" (1280x800)](https://www.amazon.nl/dp/B0DHV6DZC1)                                      | 🟨      |
 | Raspberry Pi 5 (arm64)    | Raspberry Pi OS (64-bit), Wayland, X11 | [ELECROW Portable Monitor 10.1" (1280x800)](https://www.amazon.co.uk/dp/B0BHHQLKPY)                                   | 🟨      |
 | Raspberry Pi 5 (arm64)    | Raspberry Pi OS (64-bit), Wayland, X11 | [Waveshare Capacitive Touch 14" (2160x1440)](https://www.waveshare.com/14inch-2160x1440-lcd.htm)                      | 🟨      |
 | Raspberry Pi 5 (arm64)    | Raspberry Pi OS (64-bit), Wayland, X11 | [Akntzcs Portable Touch HD 16" (1920x1200)](https://www.amazon.com/dp/B0CTGW6MQ6)                                     | 🟨      |
 | Raspberry Pi 5 (arm64)    | Raspberry Pi OS (64-bit), Wayland, X11 | [Prechen Portable Touch FHD 18.5" (1920x1080)](https://www.amazon.de/dp/B0CT2KLDBQ)                                   | 🟨      |
 | Raspberry Pi 5 (arm64)    | Raspberry Pi OS (64-bit), Wayland, X11 | Generic Non-Touch                                                                                                     | 🟨      |
 | Generic PC (x64)          | Debian KDE (64-bit), Wayland, X11      | Generic Non-Touch                                                                                                     | 🟧      |
 | Generic PC (x64)          | Ubuntu XFCE (64-bit), X11              | Generic Non-Touch                                                                                                     | 🟧      |
 | Generic PC (x64)          | Ubuntu GNOME (64-bit), X11             | Generic Non-Touch                                                                                                     | 🟧      |
 | Generic PC (x64)          | Ubuntu GNOME (64-bit), Wayland         | Generic Non-Touch                                                                                                     | 🟥      |
 ## Features
 **Minimal features** are designed to run on any system without issues:
 - A webview kiosk window launched in fullscreen mode and loading the specified `--web-url` website should not cause any problems.
 - When connecting to an internal HTTPS site with a self-signed certificate, ensure the specified FQDN matches. Using the `--ignore-certificate-errors` flag is [not recommended](https://github.com/leukipp/touchkio/issues/76) for browsing external sites.
 **Extended features** become available when the `--mqtt-*` arguments are provided and the hardware is supported:
 - The following commands are currently implemented to modify the display status. Make sure that one of these works for your display when you run it directly on the terminal, otherwise the MQTT switch will not work either.
  - `wlopm --[on,off] \*` (Raspberry Pi OS, Wayland)
  - `kscreen-doctor --dpms [on,off]` (Debian KDE, Wayland)
  - `xset dpms force [on,off]` (Generic, X11)
 - If your hardware is not fully compatible there should be no crashes, but you may miss some sensors.
  - On some Debian based systems (e.g. Ubuntu GNOME), the display status control is only available when using X11 (`xset`).
 - There are certain HDMI screens (e.g. Viewsonic) where the display status command doesn't work as expected.
  - The screen [immediately turns on again](https://github.com/leukipp/touchkio/issues/38), which may be caused by incompatible HDMI cables being used.
 - On Raspberry Pi OS the display command may fail with `ERROR: Setting power mode for output '[DSI-*,HDMI-*]' failed`.
  - This can happen if you have `wayvnc` running for remote access and is caused by a [known bug](https://github.com/leukipp/touchkio/issues/78).
 - Certain commands from the MQTT integration may require elevated privileges to work correctly.
  - Ensure that your local user has the [necessary permissions](https://github.com/leukipp/touchkio/issues/39) to run `sudo` without being prompted for a password.
 Hardware support is verified during application startup and can be seen in the terminal or in the log file under the `Supported` section.
 The necessary requirements for MQTT sensors to work are listed here:
 | Name                 | Requirements                                                            | References                                                                                                 |
 | -------------------- | ----------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------- |
 | App (Update)         | Requires `sudo` rights, `.deb` install and `touchkio.service` running . | [#70](https://github.com/leukipp/touchkio/issues/70), [#77](https://github.com/leukipp/touchkio/issues/77) |
 | Display (Status)     | Working `wlopm`, `kscreen-doctor` or `xset` command.                    | [#38](https://github.com/leukipp/touchkio/issues/38), [#57](https://github.com/leukipp/touchkio/issues/57) |
 | Display (Brightness) | Device under `/sys/class/backlight/*/brightness` exists.                | [#30](https://github.com/leukipp/touchkio/issues/30), [#32](https://github.com/leukipp/touchkio/issues/32) |
 | Keyboard             | Raspberry Pi OS (Wayland) with `squeekboard` running.                   | [#7](https://github.com/leukipp/touchkio/issues/7), [#85](https://github.com/leukipp/touchkio/issues/85)   |
 | Battery              | Device under `/sys/class/power_supply/*/capacity` exists.               | [#33](https://github.com/leukipp/touchkio/issues/33)                                                       |
 | Volume               | Device (non-dummy) `pactl get-default-sink` exists.                     | [#82](https://github.com/leukipp/touchkio/issues/82)                                                       |
 | Reboot               | Requires password-less `sudo` rights.                                   | [#39](https://github.com/leukipp/touchkio/issues/39)                                                       |
 | Shutdown             | Requires password-less `sudo` rights.                                   | [#39](https://github.com/leukipp/touchkio/issues/39)                                                       |
 ## Contributions
 In case your hardware is not listed above don't worry, give it a try.
 Running `touchkio --web-url=https://demo.home-assistant.io` will most likely just work.
-The only problems that may arise are when controlling the display or keyboard via the Home Assistant integration.
+The only problems that may arise are when controlling the display via the Home Assistant integration.
 - If you encounter any problems, please create a new [issue](https://github.com/leukipp/touchkio/issues).
 - If you encounter any problems and are able to fix it yourself, feel free to create a [pull request](https://github.com/leukipp/touchkio/pulls).
@@ -1,4 +1,10 @@
 # TouchKio
 ![build](https://img.shields.io/github/actions/workflow/status/leukipp/touchkio/release.yaml?style=flat-square)
 ![date](https://img.shields.io/github/release-date/leukipp/touchkio?style=flat-square)
 ![platform](https://img.shields.io/badge/platform-%20arm64%20|%20x64%20-teal?style=flat-square)
 ![downloads](https://img.shields.io/github/downloads/leukipp/touchkio/total?style=flat-square)
 [![sponsor](https://img.shields.io/github/sponsors/leukipp?color=red&logo=github&style=flat-square)](https://github.com/sponsors/leukipp)
 **TouchKio** is a Node.js application that utilizes Electron to create a kiosk mode window specifically designed for a Home Assistant dashboard.
 This tool is packaged as a **.deb** file, making it easy to launch the kiosk application on any Debian based Linux [hardware](https://github.com/leukipp/touchkio/blob/main/HARDWARE.md) (e.g. **Raspberry Pi**) equipped with a **DSI or HDMI** Touch Display.
 Additional releases for other Linux systems are available as **.zip** file.
@@ -11,17 +17,22 @@ Moreover, the device running the **kiosk application** also offers several **Hom
 ## Features
 - [x] Fast and easy setup.
 - [x] Remember login credentials.
 - [x] Touch optimized web browsing.
 - [x] Dynamic window status bar layout.
 - [x] Side panel widget for kiosk control.
- [x] Touch friendly web browser interface.
+- [x] Navigation bar to switch between pages.
- [x] Configurable zoom and theme support. 
+- [x] Adjustable browser zoom and theme support.
- [x] Single-tap screen wake-up functionality.
+- [x] Extended touch screen wake-up functionality.
 - [x] Remote controllable via MQTT.
-  - [x] Manage kiosk window status.
+  - [x] Toggle the on-screen keyboard.
  - [x] Manage touch keyboard status.
  - [x] Touch display power and brightness.
-  - [x] Show available system package upgrades.
+  - [x] Manage kiosk window status and zoom.
  - [x] Show network interfaces and addresses.
  - [x] List all available system package upgrades.
  - [x] Multi-webpage switching and url navigation.
  - [x] Audio volume control for connected devices.
  - [x] Execute system reboot and shutdown commands.
-  - [x] Monitor temperature, processor and memory usage.
+  - [x] Monitor battery, temperature, processor and memory usage.
 The kiosk application can be executed with command line arguments to load a **Home Assistant dashboard in fullscreen** mode.
 Additionally, a **MQTT endpoint** can be defined, allowing the application to provide controls and sensors for the Linux device and the connected Touch Display.
@@ -41,28 +52,34 @@ For a comprehensive guide on setting up MQTT with Home Assistant, please refer t
 ## Installation
 On the first run of the application, you may encounter a **setup procedure** and the Home Assistant **login screen**.
-It's recommended to create a **dedicated user** (local access only) for your kiosk device.
+It's recommended to create a dedicated Home Assistant user (local access only) for your kiosk device.
 You might also need a physical keyboard or remote VNC access to input these credentials once.
 If your hardware is [supported](https://github.com/leukipp/touchkio/blob/main/HARDWARE.md) you may be able to activate the on-screen keyboard using the side [widget](https://github.com/leukipp/touchkio/issues/16).
 #### Option 1 - The easy way
 Run this command to download and install the latest **.deb** (arm64 or x64) release.
-It will also create a systemd file for auto-startup and will guide you through the setup process:
+It will also create a systemd user file for auto-startup and will guide you through the setup process:
 ```bash
 bash <(wget -qO- https://raw.githubusercontent.com/leukipp/touchkio/main/install.sh)
 ```
 Make sure that you run this with your **standard user** and not with root (sudo).
 If you are paranoid, or smart, or both, have a look into the [install.sh](https://github.com/leukipp/touchkio/blob/main/install.sh) script before executing external code on your machine.
 The systemd **user service** is enabled by default and the kiosk application should start automatically the next time you boot.
 If you need manual control use:
 ```bash
 systemctl --user start|stop|status|restart touchkio.service
 ```
 <details><summary>Alternatives</summary><div>
 #### Option 2 - The standard way
 When connected via SSH, it's necessary to export the display variables first, as outlined in the [development](https://github.com/leukipp/touchkio?tab=readme-ov-file#development) section.
 The [install.sh](https://github.com/leukipp/touchkio/blob/main/install.sh) script mentioned above performs the following tasks (and you just have to do it manually):
 - [Download](https://github.com/leukipp/touchkio/releases/latest) the latest version file that is suitable for your architecture (arm64 or x64).
-  - Debian (**deb**): Open a terminal and execute the following command to install the application, e.g:
+  - Debian (**deb**): Open a terminal and execute the following command to install the application, e.g: `sudo apt install ./touchkio_1.x.x_arm64.deb && touchkio --setup`
-`sudo dpkg -i touchkio_1.x.x_arm64.deb && touchkio --setup`
+  - Others (**zip**): Extract the archive and run the binary, e.g: `unzip touchkio-linux-x64-1.x.x.zip && cd touchkio-linux-x64 && ./touchkio --setup`
  - Others (**zip**): Extract the archive and run the binary, e.g:  `unzip touchkio-linux-x64-1.x.x.zip && cd touchkio-linux-x64 && ./touchkio --setup`
 - If you just want to load a Home Assistant dashboard without further control you are good to go, e.g: `touchkio --web-url=https://demo.home-assistant.io`
  - The `--web-url` doesn't necessarily need to be a Home Assistant url, any kind of website can be shown in kiosk mode.
  - Only when using the MQTT integration via `--mqtt-*`, a running Home Assistant instance is required.
@@ -72,25 +89,34 @@ The [install.sh](https://github.com/leukipp/touchkio/blob/main/install.sh) scrip
 Pre-built release files are available for arm64 and x64 Linux systems.
 If you are using a different architecture, you can still utilize this repository to build your own application.
-For more information, please refer to the [development](https://github.com/leukipp/touchkio?tab=readme-ov-file#development) section, however this will do the job:
+For more information please refer to the [development](https://github.com/leukipp/touchkio?tab=readme-ov-file#development) section, however this will do the job:
 ```bash
 yarn build
 ```
 </div></details>
 #### Update
 If you have already installed TouchKio and want to upgrade to the latest version, simply install the newer version over the existing one.
 The [install.sh](https://github.com/leukipp/touchkio/blob/main/install.sh) script can also be run to update an existing installation to the **latest version**.
 The setup procedure can be skipped to use the existing default arguments from the configuration file:
 ```bash
 bash <(wget -qO- https://raw.githubusercontent.com/leukipp/touchkio/main/install.sh) update
 ```
 ## Configuration
 Running `touchkio --setup` will prompt you to enter arguments that will be used when the application starts without any specified arguments.
 These default arguments are stored in `~/.config/touchkio/Arguments.json`, where they can also be modified.
 ### WEB
 The available arguments to control the kiosk application via terminal are as follows:
-| Name                      | Default | Description                                            |
+| Name                      | Default | Description                                                                                                |
-| ------------------------- | ------- | ------------------------------------------------------ |
+| ------------------------- | ------- | ---------------------------------------------------------------------------------------------------------- |
-| `--web-url` (Required)    | -       | Url of the Home Assistant instance (HTTP(S)://IP:PORT) |
+| `--web-url` (Required)    | -       | Url of the Home Assistant instance<a id="ref1"></a><sup><a href="#foot1">[1]</a></sup> (HTTP(S)://IP:PORT) |
-| `--web-theme` (Optional)  | `dark`  | Theme settings of the web browser (`light` or `dark`)  |
+| `--web-theme` (Optional)  | `dark`  | Theme settings of the web browser (`light` or `dark`)                                                      |
-| `--web-zoom` (Optional)   | `1.25`  | Zoom settings of the web browser (`1.0` is `100%`)     |
+| `--web-zoom` (Optional)   | `1.25`  | Zoom settings of the web browser (`1.0` is `100%`)                                                         |
-| `--web-widget` (Optional) | `true`  | Enables the sidebar widget (`true` or `false`)         |
+| `--web-widget` (Optional) | `true`  | Enables the sidebar widget (`true` or `false`)                                                             |
 These arguments allow you to customize the appearance of the web browser view.
@@ -99,6 +125,20 @@ For example:
 touchkio --web-url=http://192.168.1.42:8123 --web-theme=light --web-zoom=1.0
 ```
 > <a id="foot1"></a><a href="#ref1">[1]</a>: This doesn't necessarily have to be a Home Assistant Url.
 > You can configure multiple pages by separating them with a comma:
 > `touchkio --web-url=https://demo.home-assistant.io,https://demo.immichkiosk.app`.
 In the `~/.config/touchkio/Arguments.json` file:
 ```json
 {
  "web_url": [
    "https://demo.home-assistant.io",
    "https://demo.immichkiosk.app"
  ]
 }
 ```
 ### MQTT
 To broadcast your local sensor data to Home Assistant, you can use the following arguments, which require a running MQTT broker:
 | Name                          | Default         | Description                                                                              |
@@ -116,19 +156,42 @@ For example:
 touchkio --web-url=http://192.168.1.42:8123 --mqtt-url=mqtt://192.168.1.42:1883 --mqtt-user=kiosk --mqtt-password=password
 ```
 ## User Interface
 TouchKio provides a simple webview window designed specifically for Touch Displays. Electron apps are known to be resource intensive due to their architecture and the inclusion of a full web browser environment. If you just run the kiosk application without other heavy loads, everything should run smoothly.
 ### Touch Controls
 Additional controls can be found along the right edge of the kiosk application. For more details, you may want to have a closer look here:
 | Name         | Description                                              |
 | ------------ | -------------------------------------------------------- |
 | `Widget`     | [See #16](https://github.com/leukipp/touchkio/issues/16) |
 | `Navigation` | [See #45](https://github.com/leukipp/touchkio/issues/45) |
 | `Pager`      | [See #64](https://github.com/leukipp/touchkio/issues/64) |
 ### Keyboard Shortcuts
 The application also supports basic shortcuts to enhance navigation and usability for users who prefer or require non-touch input methods:
 | Name                        | Description                  |
 | --------------------------- | ---------------------------- |
 | `Control+Left`              | Navigate to previous page    |
 | `Control+Right`             | Navigate to next page        |
 | `Control+Num_Subtract`      | Decrease the page zoom       |
 | `Control+Num_Add`           | Increase the page zoom       |
 | `Alt+Left`/`Mouse+Back`     | Navigate backward in history |
 | `Alt+Right`/`Mouse+Forward` | Navigate forward in history  |
 ## Development
 To create your own local build, you first need to install [Node.js](https://pimylifeup.com/raspberry-pi-nodejs) and [Yarn](https://classic.yarnpkg.com/lang/en/docs/install).
 Clone this repository and run `yarn install` to install the dependencies.
 Then use `yarn start` to execute the start script located in the [package.json](https://github.com/leukipp/touchkio/blob/main/package.json) file.
-There you can adjust the `--web-url` and other arguments for development runs.
+There you may want to adjust the `--web-url` and other arguments for development runs.
-If you connect to your device via SSH, you may have to export display variables so that the kiosk application can be loaded inside the desktop environment:
+If you access your device over SSH, make sure to export the display variables so the kiosk application can launch in the desktop environment.
 ```bash
 export DISPLAY=":0"
 export WAYLAND_DISPLAY="wayland-0"
 ```
-To make this permanent, consider adding the export variables to the `~/.bashrc` file.
+To make this permanent, consider adding the export variables into the `~/.bashrc` file.
 ### Extensions
@@ -169,8 +232,8 @@ While using external sensors that directly integrate with Home Assistant and by
 <details><summary>Don't waste your time reading this.</summary><div></br>
-The Raspberry Pi's **build-in on-screen keyboard** named `squeekboard` (it squeaks because some *Rust* got inside), is specifically designed for Wayland environments and features a **D-Bus interface** that allows applications to show or hide the keyboard as needed.
+The Raspberry Pi's **build-in on-screen keyboard** named `squeekboard` (it squeaks because some _Rust_ got inside), is specifically designed for Wayland environments and features a **D-Bus interface** that allows applications to show or hide the keyboard as needed.
-The kiosk application interacts with squeekboard via this `D-Bus` object path `/sm/puri/OSK0`, enabling the keyboard to be hidden or shown based on **MQTT** user input or system events. 
+The kiosk application interacts with squeekboard via the `D-Bus` object path `/sm/puri/OSK0`, enabling the keyboard to be hidden or shown based on **MQTT** user input or system events.
 The Raspberry Pi's **build-in screen blanking** function uses the command `swayidle -w timeout 600 'wlopm --off \*' resume 'wlopm --on \*' &` inside `~/.config/labwc/autostart` to blank the screen after **10 minutes**.
 The `wlopm --off \*` command changes the `bl_power` value to **4**, when setting the value to **0** the screen will turn on again.
@@ -181,7 +244,7 @@ I managed to achieve this for the `brightness` file by implementing a simple `fs
 However, I found that it **never triggered** for the `bl_power` file.
 Although the file content changes, none of the filesystem listeners where fired.
 This could be due to `swayidle`/`wlopm` performing write actions at a deeper level that are not detectable by file listeners.
-As a result, I went for a **polling solution**, checking the state of the file every **500 milliseconds** for any changes.
+As a result, I went for a **polling solution**, checking the state of the `brightness` and `dpms` file **every second** for any changes.
 While I understand this is not ideal, it's necessary to ensure proper functionality.
 The display power status and brightness can be adjusted via the MQTT integration.
@@ -195,40 +258,42 @@ Implementing stronger **security measures** would complicate the setup process a
 When using the kiosk application without initializing the default arguments, you will need to provide them with every command.
 This means that the password may be stored as plain text in various files, such as `touchkio.service`, `~/.bash_history`, etc.
-To resolve the issue where the first **touch** on a **turned-off screen** triggers a **click event**  (which could inadvertently activate Home Assistant actions), a workaround needed to be implemented.
+To address the problem where the first **touch** on a **turned-off screen** may trigger a **click event** (which could inadvertently activate Home Assistant actions), a workaround needed to be implemented.
-When the screen **turns off** the **focus** is removed from the kiosk window.
+When the screen **turns on/off**, the timestamps of these events are recorded.
-This way, the first click only turns the screen on and focuses the window, allowing subsequent clicks to work as expected.
+If a touch event is detected and the **timestamp** of the **last screen-off** is more recent than the **last screen-on** timestamp, the touch event is discarded and the screen is turned on instead.
 From that point onward, subsequent touch interactions will function normally as expected.
 Additionally, to address the problem that scrolling only works with the **web browser scrollbar** on the right, the application is configured to **simulate a touch device** using `Emulation.setEmitTouchEventsForMouse`.
 This adjustment provides a user experience similar to that of a proper mobile device.
 Electron apps are known to be **resource intensive** due to their architecture and the inclusion of a full web browser environment. If you just run the kiosk application without other heavy loads, everything should run smoothly.
 </div></details>
 ## Issues
-Please have a look into the [hardware](https://github.com/leukipp/touchkio/blob/main/HARDWARE.md) documentation if you ran into any issues. 
+Please review the [hardware](https://github.com/leukipp/touchkio/blob/main/HARDWARE.md) documentation first if you encounter any problems.
 **Minimal features** are designed to run on any system without issues:
 - A webview kiosk window launched in fullscreen mode and loading the specified `--web-url` website should not cause any problems.
 **Extended features** become available when the `--mqtt-*` arguments are provided and the hardware is supported:
 - Sensor features that may work out-of-the-box include those that do not require any interaction with the display or keyboard.
 - If your hardware is not fully compatible there should be no crashes, but you may miss some sensors.
    - On some Debian based systems (e.g. Ubuntu), the display status control may only be available when using X11.
 **Known Issues** that are by-design or for which there isn't a solution so far:
- You can use Raspberry Pi's build-in screen blanking functionality, however, if the screen is turned on through Home Assistant after being automatically turned off, it will remain on indefinitely.
+- You can use Raspberry Pi's build-in [screen blanking](https://www.raspberrypi.com/documentation/computers/configuration.html#screen-blanking-3) functionality, however, if the screen is turned on through Home Assistant after being automatically turned off, it will remain on indefinitely.
-  - It's recommended to either use the built-in screen blanking feature or implement a Home Assistant automation (e.g. presence detection) to manage the screen status.
+  - It's recommended to either use the built-in screen blanking feature or implement a Home Assistant [automation](https://www.home-assistant.io/docs/automation/basics) (e.g. presence detection) to manage the screen status.
- When using a Raspberry Pi, the on-screen keyboard doesn't automatically pop-out when entering a text field.
+  - An active VNC session can also interfere with the display state, you can find details about this in the features [section](https://github.com/leukipp/touchkio/blob/main/HARDWARE.md#features).
-  - This [issue](https://github.com/leukipp/touchkio/issues/4) also occurs in the default browser but as a current workaround you can use the side [widget](https://github.com/leukipp/touchkio/issues/16) to toggle the keyboard.
+- When using a Raspberry Pi, the on-screen keyboard doesn't [automatically pop-out](https://github.com/leukipp/touchkio/issues/4) when entering a text field inside the webview.
- Hyperlinks that redirect the browser away from the main window are intentionally disabled.
+  - As a current workaround you can use the side [widget](https://github.com/leukipp/touchkio/issues/16) to toggle the keyboard visibility.
-  - This decision was made to maintain a clean design, as navigation buttons to move back and forth between different sites were not included.
+  - There is also an [experimental feature](https://github.com/leukipp/touchkio/issues/85) that uses a special Electron flag to address this problem.
- On the terminal you may see some *ERROR:gbm_wrapper.cc* messages.
+- On the terminal you may see some _ERROR:gbm_wrapper.cc_ messages.
-  -  This appears to be a [known issue](https://github.com/electron/electron/issues/42322) that currently lacks a fix, but the webview still works.
+  - This appears to be a [known issue](https://github.com/electron/electron/issues/42322) that currently lacks a fix, but the webview still works.
 For debugging, stop the service and launch `touchkio` directly on the terminal to monitor the log output in real-time.
 This output is also written into `~/.config/touchkio/logs/main.log` for review.
 If you encounter any problems, please [create an issue](https://github.com/leukipp/touchkio/issues) and include the output of `touchkio --version`, additional information's about your system (such as operating system, hardware, etc.) and any relevant log files.
 ## Credits
-Inspired by the one and only Raspberry Pi Master Lord, [Jeff Geerling](https://www.jeffgeerling.com/blog/2024/home-assistant-and-carplay-pi-touch-display-2).
+[Inspired by](https://www.jeffgeerling.com/blog/2024/home-assistant-and-carplay-pi-touch-display-2) the one and only Raspberry Pi Master, Jeff Geerling ([@geerlingguy](https://github.com/geerlingguy)).
 Thanks to Sebastian ([@pdsccode](https://github.com/pdsccode)) for his contributions on issues and [community](https://community.home-assistant.io/t/kiosk-mode-for-raspberry-pi-with-touch-display/821196) discussions.
 If you are looking for hardware or a well-designed mounting solution for the Raspberry Pi Display, check out the [blog post](https://www.thestockpot.net/videos/home-assistant-wall-display) from Dillan Stock ([@TheStockPot-AU](https://www.youtube.com/channel/UCmlzNHg8QiWVutUyFOV2UdQ)).
 [![What My Smart Home Was Missing](https://img.youtube.com/vi/uTxURzmrVtA/maxresdefault.jpg)](https://www.youtube.com/watch?v=uTxURzmrVtA)
 ## License
 [MIT](https://github.com/leukipp/touchkio/blob/main/LICENSE)
@@ -1,4 +1,22 @@
 const fs = require("fs");
 const jszip = require("jszip");
 const crypto = require("crypto");
 const path = require("path");
 const date = new Date().toISOString();
 const generateBuildFile = (platform, arch, maker) => {
  const package = fs.readFileSync(path.join(__dirname, "package.json"), "utf8");
  const hash = crypto.createHash("sha256").update(package);
  const data = {
    id: hash.digest("hex").slice(-6),
    platform: platform,
    arch: arch,
    maker: maker,
    date: date,
  };
  return JSON.stringify(data, null, 2);
 };
 module.exports = {
  packagerConfig: {
@@ -33,10 +51,25 @@ module.exports = {
    },
  ],
  hooks: {
    postPackage: async (config, results) => {
      for (const outputPath of results.outputPaths) {
        const [name, platform, arch] = path.basename(outputPath).split("-");
        const buildFile = path.join(outputPath, "resources", "app", "build.json");
        fs.writeFileSync(buildFile, generateBuildFile(platform, arch, "deb"), { encoding: "utf8" });
      }
    },
    postMake: async (config, results) => {
      for (const result of results) {
        const artifacts = [];
-        result.artifacts.forEach((artifact) => {
+        for (const artifact of result.artifacts) {
          if (artifact.includes(".zip")) {
            const [name, platform, arch] = path.basename(artifact).split("-");
            const buildFile = path.join(`${name}-${platform}-${arch}`, "resources", "app", "build.json");
            const options = { type: "nodebuffer", compression: "DEFLATE", compressionOptions: { level: 9 } };
            const zip = await jszip.loadAsync(fs.readFileSync(artifact));
            zip.file(buildFile, generateBuildFile(platform, arch, "zip"));
            fs.writeFileSync(artifact, await zip.generateAsync(options));
          }
          if (artifact.includes("amd64")) {
            const renamed = artifact.replace("amd64", "x64");
            fs.renameSync(artifact, renamed);
@@ -44,7 +77,7 @@ module.exports = {
          } else {
            artifacts.push(artifact);
          }
-        });
+        }
        result.artifacts = artifacts;
      }
    },
@@ -0,0 +1,236 @@
 <!doctype html>
 <html>
  <head>
    <style>
      [data-theme="dark"] {
        --primary-color: rgba(225, 225, 225, 1);
        --border-color: rgba(225, 225, 225, 0.15);
        --background-color: rgba(28, 28, 28, 1);
      }
      [data-theme="light"] {
        --primary-color: rgba(33, 33, 33, 1);
        --border-color: rgba(33, 33, 33, 0.15);
        --background-color: rgba(255, 255, 255, 1);
      }
      ::-webkit-scrollbar {
        display: none;
      }
      * {
        margin: 0;
        padding: 0;
        cursor: pointer;
      }
      body {
        display: flex;
        align-items: center;
        width: 100vw;
        height: 100vh;
      }
      menu {
        display: flex;
        flex-direction: row;
        align-items: center;
        width: 100vw;
        height: 100vh;
        padding: 0 10px;
        column-gap: 10px;
        list-style-type: none;
        border-top: 1px solid var(--border-color);
        background: var(--background-color);
      }
      li {
        display: flex;
        align-items: center;
        flex: 0 0 auto;
      }
      li.dynamic {
        flex: 1 1 0%;
      }
      li.separator {
        height: 32px;
        border: 1px solid var(--border-color);
      }
      li.separator:has(+ li.hidden) {
        display: none;
      }
      li.hidden {
        display: none;
      }
      li.disabled {
        opacity: 0.5;
        cursor: not-allowed;
        pointer-events: none;
      }
      button {
        width: 32px;
        height: 32px;
        border: none;
        background-color: transparent;
      }
      input {
        width: 100%;
        min-width: 0;
        margin: 0 5px;
        padding: 6px 10px;
        border-radius: 4px;
        font-size: 18px;
        font-family: sans-serif;
        outline: none;
        border: none;
        cursor: text;
        box-sizing: border-box;
        color: var(--primary-color);
        background-color: var(--border-color);
      }
      svg {
        pointer-events: none;
        fill: var(--primary-color);
      }
    </style>
  </head>
  <body>
    <menu>
      <li>
        <button id="home">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>home-circle</title>
            <path
              d="M19.07,4.93C17.22,3 14.66,1.96 12,2C9.34,1.96 6.79,3 4.94,4.93C3,6.78 1.96,9.34 2,12C1.96,14.66 3,17.21 4.93,19.06C6.78,21 9.34,22.04 12,22C14.66,22.04 17.21,21 19.06,19.07C21,17.22 22.04,14.66 22,12C22.04,9.34 21,6.78 19.07,4.93M17,12V18H13.5V13H10.5V18H7V12H5L12,5L19.5,12H17Z"
            />
          </svg>
        </button>
      </li>
      <li>
        <button id="refresh">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>refresh-circle</title>
            <path
              d="M12 2A10 10 0 1 0 22 12A10 10 0 0 0 12 2M18 11H13L14.81 9.19A3.94 3.94 0 0 0 12 8A4 4 0 1 0 15.86 13H17.91A6 6 0 1 1 12 6A5.91 5.91 0 0 1 16.22 7.78L18 6Z"
            />
          </svg>
        </button>
      </li>
      <li class="separator"></li>
      <li>
        <button id="previous">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>page-previous</title>
            <path
              d="M4,21H19A2,2 0 0,0 21,19V13H17V15L13,12L17,9V11H21V5A2,2 0 0,0 19,3H4A2,2 0 0,0 2,5V19A2,2 0 0,0 4,21M4,15H8V17H4V15M4,11H11V13H4V11M4,7H11V9H4V7M21,11H24V13H21V11Z"
            />
          </svg>
        </button>
      </li>
      <li>
        <button id="next">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>page-next</title>
            <path
              d="M20,3H5A2,2 0 0,0 3,5V11H7V9L11,12L7,15V13H3V19A2,2 0 0,0 5,21H20A2,2 0 0,0 22,19V5A2,2 0 0,0 20,3M17,17H13V15H17V17M20,13H13V11H20V13M20,9H13V7H20V9M3,13H0V11H3V13Z"
            />
          </svg>
        </button>
      </li>
      <li class="separator"></li>
      <li class="dynamic">
        <input id="url" type="text" spellcheck="false" readonly="true" />
      </li>
      <li class="separator"></li>
      <li>
        <button id="backward">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>history</title>
            <path
              d="M13.5,8H12V13L16.28,15.54L17,14.33L13.5,12.25V8M13,3A9,9 0 0,0 4,12H1L4.96,16.03L9,12H6A7,7 0 0,1 13,5A7,7 0 0,1 20,12A7,7 0 0,1 13,19C11.07,19 9.32,18.21 8.06,16.94L6.64,18.36C8.27,20 10.5,21 13,21A9,9 0 0,0 22,12A9,9 0 0,0 13,3"
            />
          </svg>
        </button>
      </li>
      <li>
        <button id="forward">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>update</title>
            <path
              d="M21,10.12H14.22L16.96,7.3C14.23,4.6 9.81,4.5 7.08,7.2C4.35,9.91 4.35,14.28 7.08,17C9.81,19.7 14.23,19.7 16.96,17C18.32,15.65 19,14.08 19,12.1H21C21,14.08 20.12,16.65 18.36,18.39C14.85,21.87 9.15,21.87 5.64,18.39C2.14,14.92 2.11,9.28 5.62,5.81C9.13,2.34 14.76,2.34 18.27,5.81L21,3V10.12M12.5,8V12.25L16,14.33L15.28,15.54L11,13V8H12.5Z"
            />
          </svg>
        </button>
      </li>
      <li class="separator"></li>
      <li>
        <button id="minus">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>magnify-minus</title>
            <path
              d="M9,2A7,7 0 0,1 16,9C16,10.57 15.5,12 14.61,13.19L15.41,14H16L22,20L20,22L14,16V15.41L13.19,14.61C12,15.5 10.57,16 9,16A7,7 0 0,1 2,9A7,7 0 0,1 9,2M5,8V10H13V8H5Z"
            />
          </svg>
        </button>
      </li>
      <li>
        <button id="plus">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>magnify-plus</title>
            <path
              d="M9,2A7,7 0 0,1 16,9C16,10.57 15.5,12 14.61,13.19L15.41,14H16L22,20L20,22L14,16V15.41L13.19,14.61C12,15.5 10.57,16 9,16A7,7 0 0,1 2,9A7,7 0 0,1 9,2M8,5V8H5V10H8V13H10V10H13V8H10V5H8Z"
            />
          </svg>
        </button>
      </li>
    </menu>
    <script>
      const { ipcRenderer } = require("electron");
      const registerSendEvents = () => {
        document.querySelectorAll("button").forEach((button) => {
          button.addEventListener("click", (e) => {
            ipcRenderer.send("button-click", { id: e.target.id });
          });
        });
        document.querySelectorAll("input").forEach((input) => {
          input.addEventListener("blur", (e) => {
            ipcRenderer.send("input-blur", { id: e.target.id });
          });
          input.addEventListener("focus", (e) => {
            ipcRenderer.send("input-focus", { id: e.target.id });
          });
          input.addEventListener("keydown", (e) => {
            if (e.key === "Enter") {
              ipcRenderer.send("input-enter", { id: e.target.id, text: e.target.value });
            }
          });
        });
      };
      const registerReceiveEvents = () => {
        ipcRenderer.on("button-disabled", (e, button) => {
          document.getElementById(button.id).parentNode.classList.toggle("disabled", button.disabled);
        });
        ipcRenderer.on("button-hidden", (e, button) => {
          document.getElementById(button.id).parentNode.classList.toggle("hidden", button.hidden);
        });
        ipcRenderer.on("input-readonly", (e, input) => {
          document.getElementById(input.id).readOnly = input.readonly;
        });
        ipcRenderer.on("input-text", (e, input) => {
          document.getElementById(input.id).value = input.text;
          document.getElementById(input.id).placeholder = input.placeholder;
        });
        ipcRenderer.on("input-select", (e, input) => {
          window.getSelection()?.removeAllRanges();
          if (input.select) {
            document.getElementById(input.id).select();
          } else {
            document.getElementById(input.id).blur();
          }
        });
        ipcRenderer.on("data-theme", (e, data) => {
          document.documentElement.setAttribute("data-theme", data.theme);
        });
      };
      registerSendEvents();
      registerReceiveEvents();
    </script>
  </body>
 </html>
@@ -0,0 +1,80 @@
 <!doctype html>
 <html>
  <head>
    <style>
      [data-theme="hidden"] {
        --background-color: rgba(0, 0, 0, 0);
      }
      ::-webkit-scrollbar {
        display: none;
      }
      * {
        margin: 0;
        padding: 0;
        cursor: none;
      }
      body {
        display: flex;
        align-items: center;
        width: 100vw;
        height: 100vh;
      }
      menu {
        display: flex;
        flex-direction: column;
        align-items: center;
        width: 100vw;
        height: 100vh;
        list-style-type: none;
        background: var(--background-color);
      }
      li {
        display: flex;
        align-items: center;
        flex: 0 0 auto;
      }
      button {
        width: 100vw;
        height: 50vh;
        border: none;
        background-color: transparent;
      }
      #previous {
        cursor: w-resize;
      }
      #next {
        cursor: e-resize;
      }
    </style>
  </head>
  <body>
    <menu>
      <li>
        <button id="previous"></button>
      </li>
      <li>
        <button id="next"></button>
      </li>
    </menu>
    <script>
      const { ipcRenderer } = require("electron");
      const registerSendEvents = () => {
        document.querySelectorAll("button").forEach((button) => {
          button.addEventListener("click", (e) => {
            ipcRenderer.send("button-click", { id: e.target.id });
          });
        });
      };
      const registerReceiveEvents = () => {
        ipcRenderer.on("data-theme", (e, data) => {
          document.documentElement.setAttribute("data-theme", data.theme);
        });
      };
      registerSendEvents();
      registerReceiveEvents();
    </script>
  </body>
 </html>
@@ -0,0 +1,161 @@
 <!doctype html>
 <html>
  <head>
    <style>
      [data-theme="dark"] {
        --primary-color: rgba(229, 229, 229, 1);
        --background-color: rgba(66, 67, 68, 1);
        --minimize-color: rgba(52, 199, 89, 1);
        --fullscreen-color: rgba(255, 149, 0, 1);
        --terminate-color: rgba(255, 59, 48, 1);
      }
      [data-theme="light"] {
        --primary-color: rgba(26, 26, 26, 1);
        --background-color: rgba(237, 236, 235, 1);
        --minimize-color: rgba(52, 199, 89, 1);
        --fullscreen-color: rgba(255, 149, 0, 1);
        --terminate-color: rgba(255, 59, 48, 1);
      }
      ::-webkit-scrollbar {
        display: none;
      }
      * {
        margin: 0;
        padding: 0;
        cursor: pointer;
      }
      body {
        display: flex;
        align-items: center;
        width: 100vw;
        height: 100vh;
        background: var(--background-color);
      }
      header {
        display: flex;
        align-items: center;
        flex: 1 1 0%;
        height: 100vh;
        -webkit-app-region: drag;
      }
      h1 {
        position: absolute;
        transform: translate(-50%, -50%);
        top: 50%;
        left: 50%;
        font-size: 18px;
        font-weight: 500;
        font-family: sans-serif;
        overflow: hidden;
        white-space: nowrap;
        text-overflow: ellipsis;
        text-align: center;
        user-select: none;
        color: var(--primary-color);
      }
      menu {
        display: flex;
        flex-direction: row;
        align-items: center;
        flex: 0 0 auto;
        height: 100vh;
        min-width: 116px;
        padding: 0px 10px;
        column-gap: 10px;
        list-style-type: none;
        background: var(--background-color);
        position: relative;
        z-index: 1;
      }
      li {
        display: flex;
        align-items: center;
        flex: 0 0 auto;
      }
      li.disabled {
        opacity: 0.5;
        cursor: not-allowed;
        pointer-events: none;
      }
      button {
        width: 32px;
        height: 32px;
        border: none;
        background-color: transparent;
      }
      svg {
        pointer-events: none;
      }
      #minimize > svg {
        fill: var(--minimize-color);
      }
      #fullscreen > svg {
        fill: var(--fullscreen-color);
      }
      #terminate > svg {
        fill: var(--terminate-color);
      }
    </style>
  </head>
  <body>
    <header>
      <h1 id="title"></h1>
    </header>
    <menu>
      <li>
        <button id="minimize">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>minus-circle</title>
            <path d="M17,13H7V11H17M12,2A10,10 0 0,0 2,12A10,10 0 0,0 12,22A10,10 0 0,0 22,12A10,10 0 0,0 12,2Z" />
          </svg>
        </button>
      </li>
      <li>
        <button id="fullscreen">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>chevron-up-circle</title>
            <path
              d="M22,12A10,10 0 0,1 12,22A10,10 0 0,1 2,12A10,10 0 0,1 12,2A10,10 0 0,1 22,12M7.4,15.4L12,10.8L16.6,15.4L18,14L12,8L6,14L7.4,15.4Z"
            />
          </svg>
        </button>
      </li>
      <li>
        <button id="terminate">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>close-circle</title>
            <path
              d="M12,2C17.53,2 22,6.47 22,12C22,17.53 17.53,22 12,22C6.47,22 2,17.53 2,12C2,6.47 6.47,2 12,2M15.59,7L12,10.59L8.41,7L7,8.41L10.59,12L7,15.59L8.41,17L12,13.41L15.59,17L17,15.59L13.41,12L17,8.41L15.59,7Z"
            />
          </svg>
        </button>
      </li>
    </menu>
    <script>
      const { ipcRenderer } = require("electron");
      const registerSendEvents = () => {
        document.querySelectorAll("button").forEach((button) => {
          button.addEventListener("click", (e) => {
            ipcRenderer.send("button-click", { id: e.target.id });
          });
        });
      };
      const registerReceiveEvents = () => {
        ipcRenderer.on("button-disabled", (e, button) => {
          document.getElementById(button.id).parentNode.classList.toggle("disabled", button.disabled);
        });
        ipcRenderer.on("text-content", (e, text) => {
          document.getElementById(text.id).textContent = text.content;
        });
        ipcRenderer.on("data-theme", (e, data) => {
          document.documentElement.setAttribute("data-theme", data.theme);
        });
      };
      registerSendEvents();
      registerReceiveEvents();
    </script>
  </body>
 </html>
@@ -46,6 +46,14 @@
        border-bottom: 1px solid var(--border-color);
        background: var(--background-color);
      }
      li {
        display: flex;
        align-items: center;
        flex: 0 0 auto;
      }
      li.hidden {
        display: none;
      }
      button {
        width: 32px;
        height: 32px;
@@ -60,16 +68,6 @@
  </head>
  <body>
    <menu>
      <li>
        <button id="refresh">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>web-refresh</title>
            <path
              d="M13.82 14H9.66C9.56 13.34 9.5 12.68 9.5 12S9.56 10.65 9.66 10H14.34C14.43 10.65 14.5 11.32 14.5 12C14.5 12.5 14.46 13 14.4 13.46C15 12.96 15.72 12.57 16.5 12.32C16.5 12.21 16.5 12.11 16.5 12C16.5 11.32 16.44 10.66 16.36 10H19.74C19.9 10.64 20 11.31 20 12C20 12.06 20 12.12 20 12.18C20.7 12.35 21.35 12.63 21.95 13C22 12.68 22 12.34 22 12C22 6.5 17.5 2 12 2C6.47 2 2 6.5 2 12C2 17.5 6.5 22 12 22C12.34 22 12.68 22 13 21.95C12.59 21.29 12.29 20.55 12.13 19.75C12.09 19.82 12.05 19.89 12 19.96C11.17 18.76 10.5 17.43 10.09 16H12.5C12.81 15.25 13.26 14.58 13.82 14M18.92 8H15.97C15.65 6.75 15.19 5.55 14.59 4.44C16.43 5.07 17.96 6.34 18.92 8M12 4.03C12.83 5.23 13.5 6.57 13.91 8H10.09C10.5 6.57 11.17 5.23 12 4.03M4.26 14C4.1 13.36 4 12.69 4 12S4.1 10.64 4.26 10H7.64C7.56 10.66 7.5 11.32 7.5 12S7.56 13.34 7.64 14H4.26M5.08 16H8C8.35 17.25 8.8 18.45 9.4 19.56C7.57 18.93 6.03 17.65 5.08 16M8 8H5.08C6.03 6.34 7.57 5.06 9.4 4.44C8.8 5.55 8.35 6.75 8 8M20.83 15.67L22 14.5V18.5H18L19.77 16.73C19.32 16.28 18.69 16 18 16C16.62 16 15.5 17.12 15.5 18.5S16.62 21 18 21C18.82 21 19.54 20.61 20 20H21.71C21.12 21.47 19.68 22.5 18 22.5C15.79 22.5 14 20.71 14 18.5S15.79 14.5 18 14.5C19.11 14.5 20.11 14.95 20.83 15.67Z"
            />
          </svg>
        </button>
      </li>
      <li>
        <button id="fullscreen">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
@@ -81,11 +79,11 @@
        </button>
      </li>
      <li>
-        <button id="minimize">
+        <button id="theme">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
-            <title>image-size-select-small</title>
+            <title>compare</title>
            <path
-              d="M23,15H21V17H23V15M23,11H21V13H23V11M23,19H21V21C22,21 23,20 23,19M15,3H13V5H15V3M23,7H21V9H23V7M21,3V5H23C23,4 22,3 21,3M3,21H11V15H1V19A2,2 0 0,0 3,21M3,7H1V9H3V7M15,19H13V21H15V19M19,3H17V5H19V3M19,19H17V21H19V19M3,3C2,3 1,4 1,5H3V3M3,11H1V13H3V11M11,3H9V5H11V3M7,3H5V5H7V3Z"
+              d="M19,3H14V5H19V18L14,12V21H19A2,2 0 0,0 21,19V5C21,3.89 20.1,3 19,3M10,18H5L10,12M10,3H5C3.89,3 3,3.89 3,5V19A2,2 0 0,0 5,21H10V23H12V1H10V3Z"
            />
          </svg>
        </button>
@@ -100,26 +98,39 @@
          </svg>
        </button>
      </li>
      <li>
        <button id="navigation">
          <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
            <title>web</title>
            <path
              d="M16.36,14C16.44,13.34 16.5,12.68 16.5,12C16.5,11.32 16.44,10.66 16.36,10H19.74C19.9,10.64 20,11.31 20,12C20,12.69 19.9,13.36 19.74,14M14.59,19.56C15.19,18.45 15.65,17.25 15.97,16H18.92C17.96,17.65 16.43,18.93 14.59,19.56M14.34,14H9.66C9.56,13.34 9.5,12.68 9.5,12C9.5,11.32 9.56,10.65 9.66,10H14.34C14.43,10.65 14.5,11.32 14.5,12C14.5,12.68 14.43,13.34 14.34,14M12,19.96C11.17,18.76 10.5,17.43 10.09,16H13.91C13.5,17.43 12.83,18.76 12,19.96M8,8H5.08C6.03,6.34 7.57,5.06 9.4,4.44C8.8,5.55 8.35,6.75 8,8M5.08,16H8C8.35,17.25 8.8,18.45 9.4,19.56C7.57,18.93 6.03,17.65 5.08,16M4.26,14C4.1,13.36 4,12.69 4,12C4,11.31 4.1,10.64 4.26,10H7.64C7.56,10.66 7.5,11.32 7.5,12C7.5,12.68 7.56,13.34 7.64,14M12,4.03C12.83,5.23 13.5,6.57 13.91,8H10.09C10.5,6.57 11.17,5.23 12,4.03M18.92,8H15.97C15.65,6.75 15.19,5.55 14.59,4.44C16.43,5.07 17.96,6.34 18.92,8M12,2C6.47,2 2,6.5 2,12A10,10 0 0,0 12,22A10,10 0 0,0 22,12A10,10 0 0,0 12,2Z"
            />
          </svg>
        </button>
      </li>
    </menu>
    <script>
      const { ipcRenderer } = require("electron");
-      // Register button click send message
+      const registerSendEvents = () => {
-      document.querySelectorAll("button").forEach((button) => {
+        document.querySelectorAll("button").forEach((button) => {
-        button.addEventListener("click", (e) => {
+          button.addEventListener("click", (e) => {
-          ipcRenderer.send("button-click", { id: e.target.id });
+            ipcRenderer.send("button-click", { id: e.target.id });
          });
        });
-      });
+      };
-      // Register button hide receive message
+      const registerReceiveEvents = () => {
-      ipcRenderer.on("button-hide", (e, button) => {
+        ipcRenderer.on("button-hidden", (e, button) => {
-        document.getElementById(button.id).parentNode.hidden = true;
+          document.getElementById(button.id).parentNode.classList.toggle("hidden", button.hidden);
-      });
+        });
        ipcRenderer.on("data-theme", (e, data) => {
          document.documentElement.setAttribute("data-theme", data.theme);
        });
      };
-      // Register data theme receive message
+      registerSendEvents();
-      ipcRenderer.on("data-theme", (e, data) => {
+      registerReceiveEvents();
        document.documentElement.setAttribute("data-theme", data.theme);
      });
    </script>
  </body>
 </html>
@@ -2,10 +2,25 @@ const fs = require("fs");
 const path = require("path");
 const crypto = require("crypto");
 const readline = require("readline/promises");
-const integration = require("./src/integration");
+const integration = require("./js/integration");
-const hardware = require("./src/hardware");
+const hardware = require("./js/hardware");
-const webview = require("./src/webview");
+const webview = require("./js/webview");
 const log = require("electron-log");
 const { app } = require("electron");
 const Events = require("events");
 global.APP = global.APP || {};
 global.ARGS = global.ARGS || {};
 global.EVENTS = global.EVENTS || new Events();
 if (!process.env.DISPLAY) {
  console.error(`\n$DISPLAY variable not set to run the GUI application, are you connected via SSH?\n`);
  console.error(`If you have installed the service use:`);
  console.error(`  systemctl --user start touchkio.service`);
  console.error(`Alternatively export the variables first:`);
  console.error(`  export DISPLAY=":0" && export WAYLAND_DISPLAY="wayland-0" && touchkio\n`);
  process.exit(1);
 }
 /**
 * This promise resolves when the app has finished initializing,
@@ -13,39 +28,166 @@ const { app } = require("electron");
 * initialization tasks.
 */
 app.whenReady().then(async () => {
-  const lock = app.requestSingleInstanceLock();
+  if (!(await initApp()) || !(await initArgs()) || !(await initLog())) {
-  if (!lock) {
+    return;
    console.error("TouchKio is already running");
    return app.quit();
  }
  // Show used arguments
  const args = Object.assign({}, ARGS);
  if ("mqtt_password" in args) {
    args.mqtt_password = "*".repeat((args.mqtt_password || "").length);
  }
  console.info(`Arguments: ${JSON.stringify(args, null, 2)}`);
  // Chained init functions
  const chained = [webview.init, hardware.init, integration.init];
  for (const init of chained) {
    if (!(await init())) {
      break;
    }
  }
 });
 /**
 * Initializes the global app object.
 *
 * @returns {bool} Returns true if the initialization was successful.
 */
 const initApp = async () => {
  const packageJsonPath = path.join(app.getAppPath(), "package.json");
  const packageJson = JSON.parse(fs.readFileSync(packageJsonPath, "utf8"));
  const buildJsonPath = path.join(app.getAppPath(), "build.json");
  const buildFileExists = fs.existsSync(buildJsonPath);
  // Set required app infos
  APP.name = app.getName();
  APP.title = packageJson.title;
  APP.version = app.getVersion();
  APP.path = app.getAppPath();
  APP.icon = path.join(app.getAppPath(), "img", "icon.png");
  APP.log = path.join(app.getPath("logs"), "main.log");
  APP.config = app.getPath("userData");
  // Set additional update infos
  APP.homepage = `https://github.com/${packageJson.author}/${packageJson.name}`;
  APP.releases = {
    url: `https://api.github.com/repos/${packageJson.author}/${packageJson.name}/releases`,
    latest: null,
  };
  APP.scripts = {
    install: `https://raw.githubusercontent.com/${packageJson.author}/${packageJson.name}/main/install.sh`,
  };
  // Set additional build infos
  APP.build = {};
  if (buildFileExists) {
    APP.build = JSON.parse(fs.readFileSync(buildJsonPath, "utf8"));
  }
  // Request single app instance lock
  if (!app.requestSingleInstanceLock()) {
    console.error(`${APP.title} is already running`);
    return app.exit(1);
  }
  return true;
 };
 /**
 * Initializes the global args object.
 *
 * @returns {bool} Returns true if the initialization was successful.
 */
 const initArgs = async () => {
  let args = parseArgs(process);
  let argsProvided = !!Object.keys(args).length;
-  let argsFilePath = path.join(app.getPath("userData"), "Arguments.json");
+  let argsFilePath = path.join(APP.config, "Arguments.json");
  let argsFileExists = fs.existsSync(argsFilePath);
  // Show version and release info
  if ("help" in args || "version" in args) {
    let build = "";
    if (APP.build.id) {
      build = ` (${APP.build.id}), built on ${APP.build.date} (${APP.build.platform}-${APP.build.arch}-${APP.build.maker})`;
    }
    console.info(`${APP.name}-v${APP.version}${build}\n${APP.homepage}`);
    return app.exit(0);
  }
  // Setup arguments from file path
-  if ("setup" in args || (!argsProvided && !argsFileExists)) {
+  if ((!argsProvided && !argsFileExists) || "setup" in args) {
    await sleep(3000);
    do {
      args = await promptArgs(process);
    } while (!Object.keys(args).length);
    writeArgs(argsFilePath, args);
-  } else if (!argsProvided && argsFileExists) {
+  } else if (argsFileExists) {
-    args = readArgs(argsFilePath);
+    args = { ...readArgs(argsFilePath), ...args };
  }
-  // Show used arguments
+  // Check arguments object
-  console.log(`Arguments: ${JSON.stringify(args, null, 2)}`);
+  if (!Object.keys(args).length) {
    console.error(`No arguments provided`);
    return app.exit(1);
  }
-  // Chained init functions
+  // Split url arguments
-  const chained = [webview.init, hardware.init, integration.init];
+  args.web_url = args.web_url || [];
-  for (const init of chained) {
+  if (!Array.isArray(args.web_url)) {
-    if (!(await init(args))) {
+    args.web_url = args.web_url.split(",").map((url) => url.trim());
-      break;
+  }
  ARGS = args;
  return true;
 };
 /**
 * Initializes the global log object.
 *
 * @returns {bool} Returns true if the initialization was successful.
 */
 const initLog = async () => {
  try {
    if (fs.existsSync(APP.log)) {
      fs.unlinkSync(APP.log);
    }
  } catch (error) {
    console.error("Failed to delete log file:", error.message);
  }
-});
+
  // Overwrite console log
  APP.logs = [];
  log.errorHandler.startCatching({
    showDialog: false,
    onError({ error }) {
      console.error(`Uncaught Error: ${error.message} (${error.stack})`);
      app.exit(1);
    },
  });
  log.hooks.push((message, transport, type) => {
    const text = message.data.join(" ");
    if (!text.startsWith("(node:") && type === "console") {
      APP.logs.unshift({
        time: message.date,
        level: message.level,
        text: text,
      });
      if (APP.logs.length > 10) {
        APP.logs.splice(10);
      }
      EVENTS.emit("consoleLog", APP.logs[0]);
    }
    return message;
  });
  log.transports.file.resolvePathFn = () => {
    return APP.log;
  };
  Object.assign(console, log.functions);
  return true;
 };
 /**
 * Parses command-line arguments from the given process object.
@@ -54,14 +196,13 @@ app.whenReady().then(async () => {
 * @returns {Object} An object mapping argument names to their corresponding values.
 */
 const parseArgs = (proc) => {
-  let args = {};
+  const args = proc.argv.slice(1).filter((arg) => arg !== ".");
-  proc.argv.slice(1).forEach((arg) => {
+  return Object.fromEntries(
-    if (arg !== ".") {
+    args.flatMap((arg) => {
-      const [key, value] = arg.split("=");
+      const match = arg.match(/^--?([^=]+)(?:=(.*))?$/);
-      args[key.replace("--", "").replace("-", "_")] = value;
+      return match ? [[match[1].replace(/-/g, "_"), match[2] ?? null]] : [];
-    }
+    }),
-  });
+  );
  return args;
 };
 /**
@@ -133,30 +274,41 @@ const promptArgs = async (proc) => {
  // Prompt questions and wait for the answers
  let args = {};
  let ignore = [];
-  for (const { key, question, fallback } of prompts) {
+  try {
-    if (key === "mqtt") {
+    for (const { key, question, fallback } of prompts) {
-      const prompt = `${question} (${fallback}): `;
+      if (key === "mqtt") {
-      const answer = await read.question(prompt);
+        const prompt = `${question} (${fallback}): `;
-      const value = (answer.trim() || fallback.match(/[YN]/)[0]).toLowerCase();
+        const answer = await read.question(prompt);
-      if (!["y", "yes"].includes(value)) {
+        const value = (answer.trim() || fallback.match(/[YN]/)[0]).toLowerCase();
-        ignore = ignore.concat(["mqtt_url", "mqtt_user", "mqtt_password", "mqtt_discovery"]);
+        if (!["y", "yes"].includes(value)) {
          ignore = ignore.concat(["mqtt_url", "mqtt_user", "mqtt_password", "mqtt_discovery"]);
        }
      } else if (key === "check") {
        const json = JSON.stringify(args, null, 2);
        const prompt = `${question}\n${json}\n(${fallback}): `;
        const answer = await read.question(prompt);
        const value = (answer.trim() || fallback.match(/[YN]/)[0]).toLowerCase();
        if (!["y", "yes"].includes(value)) {
          args = {};
        }
      } else if (!ignore.includes(key)) {
        const prompt = `${question} (${fallback}): `;
        const answer = await read.question(prompt);
        const value = answer.trim() || fallback;
        if (key === "web_url") {
          args[key] = value.split(",").map((v) => v.trim());
        } else {
          args[key] = value;
        }
      }
    } else if (key === "check") {
      const json = JSON.stringify(args, null, 2);
      const prompt = `${question}\n${json}\n(${fallback}): `;
      const answer = await read.question(prompt);
      const value = (answer.trim() || fallback.match(/[YN]/)[0]).toLowerCase();
      if (!["y", "yes"].includes(value)) {
        args = {};
      }
    } else if (!ignore.includes(key)) {
      const prompt = `${question} (${fallback}): `;
      const answer = await read.question(prompt);
      const value = answer.trim() || fallback;
      args[key] = value;
    }
  } catch (error) {
    console.error(`\n${error.message}`);
    args = {};
    app.exit(1);
  } finally {
    read.close();
  }
  read.close();
  return args;
 };
@@ -168,11 +320,15 @@ const promptArgs = async (proc) => {
 * @param {Object} args - The arguments object.
 */
 const writeArgs = (path, args) => {
-  const argc = Object.assign({}, args);
+  try {
-  if ("mqtt_password" in argc) {
+    const argc = Object.assign({}, args);
-    argc.mqtt_password = encrypt(argc.mqtt_password);
+    if ("mqtt_password" in argc) {
      argc.mqtt_password = encrypt(argc.mqtt_password);
    }
    fs.writeFileSync(path, JSON.stringify(argc, null, 2));
  } catch (error) {
    console.error(`Failed to write ${path}:`, error.message);
  }
  fs.writeFileSync(path, JSON.stringify(argc, null, 2));
 };
 /**
@@ -182,11 +338,16 @@ const writeArgs = (path, args) => {
 * @returns {Object} The arguments object.
 */
 const readArgs = (path) => {
-  const args = JSON.parse(fs.readFileSync(path));
+  try {
-  if ("mqtt_password" in args) {
+    const args = JSON.parse(fs.readFileSync(path, "utf8"));
-    args.mqtt_password = decrypt(args.mqtt_password);
+    if ("mqtt_password" in args) {
      args.mqtt_password = decrypt(args.mqtt_password);
    }
    return args;
  } catch (error) {
    console.error(`Failed to parse ${path}:`, error.message);
  }
-  return args;
+  return {};
 };
 /**
@@ -197,7 +358,7 @@ const readArgs = (path) => {
 */
 const encrypt = (value) => {
  const iv = crypto.randomBytes(16);
-  const key = crypto.scryptSync(hardware.getMachineId(), app.getName(), 32);
+  const key = crypto.scryptSync(hardware.getMachineId(), APP.name, 32);
  const cipher = crypto.createCipheriv("aes-256-cbc", key, iv);
  let encrypted = cipher.update(value, "utf8", "hex");
  encrypted += cipher.final("hex");
@@ -213,7 +374,7 @@ const encrypt = (value) => {
 const decrypt = (value) => {
  const p = Buffer.from(value, "base64").toString("utf8").split(":");
  const iv = Buffer.from(p.shift(), "hex");
-  const key = crypto.scryptSync(hardware.getMachineId(), app.getName(), 32);
+  const key = crypto.scryptSync(hardware.getMachineId(), APP.name, 32);
  const decipher = crypto.createDecipheriv("aes-256-cbc", key, iv);
  const buffer = Buffer.from(p.join(":"), "hex");
  let decrypted = decipher.update(buffer, "binary", "utf8");
@@ -227,4 +388,6 @@ const decrypt = (value) => {
 * @param {number} ms - Sleep time in milliseconds.
 * @returns {Promise} A promise resolving after the timeout.
 */
-const sleep = (ms) => new Promise((r) => setTimeout(r, ms));
+const sleep = (ms) => {
  return new Promise((r) => setTimeout(r, ms));
 };
@@ -1,72 +1,64 @@
 #!/usr/bin/env bash
 # Read arguments
 ARG_EARLY=false
 ARG_UPDATE=false
 for arg in "$@"; do
  case "$arg" in
    early) ARG_EARLY=true ;;
    update) ARG_UPDATE=true ;;
  esac
 done
 # Determine system architecture
 echo -e "Determining system architecture..."
 BITS=$(getconf LONG_BIT)
 case "$(uname -m)" in
-    aarch64)
+    x86_64) ARCH="x64" ;;
-        ARCH="arm64"
+    aarch64) ARCH="arm64" ;;
-        ;;
+    *) { echo "Architecture $(uname -m) running $BITS-bit operating system is not supported."; exit 1; } ;;
    x86_64)
        ARCH="x64"
        ;;
    *)
        echo "Architecture $(uname -m) running $BITS-bit operating system is not supported."
        exit 1
        ;;
 esac
-if [ "$BITS" -ne 64 ]; then
+[ "$BITS" -eq 64 ] || { echo "Architecture $ARCH running $BITS-bit operating system is not supported."; exit 1; }
    echo "Architecture $ARCH running $BITS-bit operating system is not supported."
    exit 1
 fi
 echo "Architecture $ARCH running $BITS-bit operating system is supported."
 # Download the latest .deb package
 echo -e "\nDownloading the latest release..."
 DEB_URL=$(wget -qO- https://api.github.com/repos/leukipp/touchkio/releases/latest | \
 grep -o "\"browser_download_url\": \"[^\"]*_${ARCH}\.deb\"" | \
 sed 's/"browser_download_url": "//;s/"//g')
 TMP_DIR=$(mktemp -d)
 chmod 755 "$TMP_DIR"
 JSON=$(wget -qO- "https://api.github.com/repos/leukipp/touchkio/releases" | tr -d '\r\n')
 if $ARG_EARLY; then
  DEB_REG='"prerelease":\s*(true|false).*?"browser_download_url":\s*"\K[^\"]*_'$ARCH'\.deb'
 else
  DEB_REG='"prerelease":\s*false.*?"browser_download_url":\s*"\K[^\"]*_'$ARCH'\.deb'
 fi
 DEB_URL=$(echo "$JSON" | grep -oP "$DEB_REG" | head -n 1)
 DEB_PATH="${TMP_DIR}/$(basename "$DEB_URL")"
-if [ -z "$DEB_URL" ]; then
+[ -z "$DEB_URL" ] && { echo "Download url for .deb file not found."; exit 1; }
-    echo "Download url for .deb file not found."
+wget --show-progress -q -O "$DEB_PATH" "$DEB_URL" || { echo "Failed to download the .deb file."; exit 1; }
    exit 1
 fi
 if ! wget --show-progress -q -O "$DEB_PATH" "$DEB_URL"; then
    echo "Failed to download the .deb file."
    exit 1
 fi
 # Install the latest .deb package
 echo -e "\nInstalling the latest release..."
-if ! command -v dpkg &> /dev/null; then
+command -v apt &> /dev/null || { echo "Package manager apt was not found."; exit 1; }
-    echo "Package manager dpkg was not found."
+sudo apt install -y "$DEB_PATH" || { echo "Installation of .deb file failed."; exit 1; }
    exit 1
 fi
 if ! sudo dpkg -i "$DEB_PATH"; then
    echo "Installation of .deb file failed."
    exit 1
 fi
 # Create the systemd user service
 echo -e "\nCreating systemd user service..."
-SERVICE_FILE="$HOME/.config/systemd/user/touchkio.service"
+SERVICE_NAME="touchkio.service"
-mkdir -p "$(dirname "$SERVICE_FILE")" || { echo "Failed to create directory for $SERVICE_FILE"; exit 1; }
+SERVICE_FILE="$HOME/.config/systemd/user/$SERVICE_NAME"
 mkdir -p "$(dirname "$SERVICE_FILE")" || { echo "Failed to create directory for $SERVICE_FILE."; exit 1; }
-bash -c "cat << EOF > \"$SERVICE_FILE\"
+SERVICE_CONTENT="[Unit]
 [Unit]
 Description=TouchKio
 After=graphical.target
 Wants=network-online.target
 [Service]
 ExecStart=/usr/bin/touchkio
@@ -74,32 +66,58 @@ Restart=on-failure
 RestartSec=5s
 [Install]
-WantedBy=default.target
+WantedBy=default.target"
 EOF"
-systemctl --user enable "$(basename "$SERVICE_FILE")" || { echo "Failed to enable service $SERVICE_FILE"; exit 1; }
+if $ARG_UPDATE; then
-echo "Service $SERVICE_FILE enabled"
+  if systemctl --user --quiet is-active "${SERVICE_NAME}"; then
    systemctl --user restart "${SERVICE_NAME}"
    echo "Existing $SERVICE_NAME restarted."
  else
    echo "Existing $SERVICE_NAME not running, start touchkio manually."
  fi
  exit 0
 fi
 SERVICE_CREATE=true
 if [ -f "$SERVICE_FILE" ]; then
    read -p "Service $SERVICE_FILE exists, overwrite? (y/N) " overwrite
    [[ ${overwrite:-n} == [Yy]* ]] || SERVICE_CREATE=false
 fi
 if $SERVICE_CREATE; then
    echo "$SERVICE_CONTENT" > "$SERVICE_FILE" || { echo "Failed to write to $SERVICE_FILE."; exit 1; }
    systemctl --user enable "$(basename "$SERVICE_FILE")" || { echo "Failed to enable service $SERVICE_FILE."; exit 1; }
    echo "Service $SERVICE_FILE enabled."
 else
    echo "Service $SERVICE_FILE not created."
 fi
 # Export display variables
 echo -e "\nExporting display variables..."
 if [ -z "$DISPLAY" ]; then
    export DISPLAY=":0"
-    echo "DISPLAY was not set, defaulting to \"$DISPLAY\""
+    echo "DISPLAY was not set, defaulting to \"$DISPLAY\"."
 else
-    echo "DISPLAY is set to \"$DISPLAY\""
+    echo "DISPLAY is set to \"$DISPLAY\"."
 fi
 if [ -z "$WAYLAND_DISPLAY" ]; then
    export WAYLAND_DISPLAY="wayland-0"
-    echo "WAYLAND_DISPLAY was not set, defaulting to \"$WAYLAND_DISPLAY\""
+    echo "WAYLAND_DISPLAY was not set, defaulting to \"$WAYLAND_DISPLAY\"."
 else
-    echo "WAYLAND_DISPLAY is set to \"$WAYLAND_DISPLAY\""
+    echo "WAYLAND_DISPLAY is set to \"$WAYLAND_DISPLAY\"."
 fi
 # Start the setup mode
-echo ""
+read -p $'\nStart touchkio setup? (Y/n) ' setup
-read -p "Start touchkio setup? (Y/n) " answer
+
-if [[ ${answer:-y} == [Yy]* ]]; then
+if [[ ${setup:-y} == [Yy]* ]]; then
    echo "/usr/bin/touchkio --setup"
    /usr/bin/touchkio --setup
 else
    echo "/usr/bin/touchkio"
    /usr/bin/touchkio
 fi
 exit 0
@@ -1,27 +1,31 @@
 {
    "name": "touchkio",
    "title": "TouchKio",
    "description": "Home Assistant Touch Kiosk",
    "homepage": "https://github.com/leukipp/touchkio",
    "author": "leukipp",
-    "version": "1.1.1",
+    "version": "1.4.0",
    "license": "MIT",
    "main": "index.js",
    "scripts": {
-        "start": "electron . --web-url=https://demo.home-assistant.io",
+        "start": "electron . --web-url=https://demo.home-assistant.io,https://demo.immichkiosk.app --trace-warnings",
        "build": "electron-forge make"
    },
    "prettier": {
        "printWidth": 120
    },
    "devDependencies": {
-        "@electron-forge/cli": "^7.6.0",
+        "@electron-forge/cli": "^7.10.0",
-        "@electron-forge/maker-deb": "^7.6.0",
+        "@electron-forge/maker-deb": "^7.10.0",
-        "@electron-forge/maker-zip": "^7.6.0",
+        "@electron-forge/maker-zip": "^7.10.0",
-        "@electron-forge/publisher-github": "^7.6.0",
+        "@electron-forge/publisher-github": "^7.10.0",
-        "electron": "^33.3.1",
+        "electron": "^38.2.2",
-        "prettier": "^3.4.2"
+        "jszip": "^3.10.1",
        "prettier": "^3.6.2"
    },
    "dependencies": {
-        "mqtt": "^5.10.3"
+        "axios": "^1.12.2",
        "electron-log": "^5.4.3",
        "mqtt": "^5.14.1"
    }
 }
@@ -1,709 +0,0 @@
 const os = require("os");
 const fs = require("fs");
 const path = require("path");
 const process = require("child_process");
 global.HARDWARE = global.HARDWARE || {
  initialized: false,
  status: "invalid",
  session: {},
  support: {},
  display: {
    status: {
      path: null,
      value: null,
    },
    brightness: {
      path: null,
      value: null,
      max: null,
    },
    notifiers: [],
  },
  keyboard: {
    visible: null,
    notifiers: [],
  },
 };
 /**
 * Initializes the hardware with the provided arguments.
 *
 * @param {Object} args - The command-line arguments to customize the initialization process.
 * @returns {boolean} Returns true if the initialization was successful.
 */
 const init = async (args) => {
  if (!compatibleDevice()) {
    console.warn("Device not supported");
    return false;
  }
  // Init globals
  HARDWARE.session.user = sessionUser();
  HARDWARE.session.type = sessionType();
  HARDWARE.display.status.path = getDisplayStatusPath();
  HARDWARE.support.displayStatus = HARDWARE.display.status.path !== null;
  HARDWARE.display.brightness.path = getDisplayBrightnessPath();
  HARDWARE.support.displayBrightness = HARDWARE.display.brightness.path !== null;
  HARDWARE.display.brightness.max = getDisplayBrightnessMax();
  HARDWARE.support.keyboardVisibility = processRuns("squeekboard");
  HARDWARE.initialized = true;
  HARDWARE.status = "valid";
  // Show supported features
  console.log(`Supported: ${JSON.stringify(HARDWARE.support, null, 2)}`);
  // Show session infos
  console.log("\nUser:", HARDWARE.session.user);
  console.log("Session:", HARDWARE.session.type);
  // Show device infos
  console.log("\nModel:", getModel());
  console.log("Vendor:", getVendor());
  console.log("Serial Number:", getSerialNumber());
  console.log("Host Name:", getHostName());
  // Show system infos
  console.log("\nUp Time:", getUpTime());
  console.log("Memory Size:", getMemorySize());
  console.log("Memory Usage:", getMemoryUsage());
  console.log("Processor Usage:", getProcessorUsage());
  console.log("Processor Temperature:", getProcessorTemperature());
  // Show display infos
  console.log(`\nDisplay Status [${HARDWARE.display.status.path}]:`, getDisplayStatus());
  console.log(`Display Brightness [${HARDWARE.display.brightness.path}]:`, getDisplayBrightness(), "\n");
  // Check for keyboard visibility
  setKeyboardVisibility("OFF", (reply, error) => {
    if (!reply || error) {
      return;
    }
    dbusMonitor("/sm/puri/OSK0", (property, error) => {
      if (!property || error) {
        return;
      }
      HARDWARE.keyboard.visibility = property.Visible === "true";
      HARDWARE.keyboard.notifiers.forEach((notifier) => {
        notifier();
      });
    });
  });
  // Check for display changes
  setInterval(update, 500);
  return true;
 };
 /**
 * Updates the shared hardware properties.
 */
 const update = () => {
  if (!HARDWARE.initialized) {
    return;
  }
  // Display status has changed
  if (HARDWARE.support.displayStatus) {
    const status = fs.readFileSync(`${HARDWARE.display.status.path}/dpms`, "utf8").trim();
    if (status !== HARDWARE.display.status.value) {
      console.log("Update Display Status:", getDisplayStatus());
      HARDWARE.display.status.value = status;
      HARDWARE.display.notifiers.forEach((notifier) => {
        notifier();
      });
    }
  }
  // Display brightness has changed
  if (HARDWARE.support.displayBrightness) {
    const brightness = fs.readFileSync(`${HARDWARE.display.brightness.path}/brightness`, "utf8").trim();
    if (brightness !== HARDWARE.display.brightness.value) {
      console.log("Update Display Brightness:", getDisplayBrightness());
      HARDWARE.display.brightness.value = brightness;
      HARDWARE.display.notifiers.forEach((notifier) => {
        notifier();
      });
    }
  }
 };
 /**
 * Verifies device compatibility by checking the presence of necessary sys paths.
 *
 * @returns {bool} Returns true if all paths exists.
 */
 const compatibleDevice = () => {
  if (os.platform() !== "linux") {
    return false;
  }
  const paths = ["/sys/class/drm", "/sys/class/backlight", "/sys/class/thermal"];
  return paths.every((path) => fs.existsSync(path));
 };
 /**
 * Gets the session user name using `os.userInfo()`.
 *
 * @returns {string|null} Returns session user name or null if an error occurs.
 */
 const sessionUser = () => {
  try {
    return os.userInfo().username;
  } catch {}
  return null;
 };
 /**
 * Gets the session type for the user using `loginctl`.
 *
 * @returns {string|null} Returns session type 'x11'/'wayland' or null if an error occurs.
 */
 const sessionType = () => {
  if (!commandExists("loginctl")) {
    return null;
  }
  return execSyncCommand("loginctl", [
    "show-session",
    "$(loginctl show-user $(whoami) -p Display --value)",
    "-p Type --value",
  ]);
 };
 /**
 * Checks the session type for the logged in user.
 *
 * @returns {bool} Returns true if the session matches the type.
 */
 const session = (type) => {
  return HARDWARE.session.type == type;
 };
 /**
 * Gets the model name using `/sys/firmware/devicetree/base/model` or `/sys/class/dmi/id/product_name`.
 *
 * @returns {string|null} The model name of the device or 'Generic' if not found.
 */
 const getModel = () => {
  const paths = ["/sys/firmware/devicetree/base/model", "/sys/class/dmi/id/product_name"];
  for (const path of paths) {
    if (fs.existsSync(path)) {
      return execSyncCommand("sudo", ["cat", path]);
    }
  }
  return "Generic";
 };
 /**
 * Gets the vendor name using `/sys/class/dmi/id/board_vendor`.
 *
 * @returns {string|null} The vendor name of the device or 'Generic' if not found.
 */
 const getVendor = () => {
  const paths = ["/sys/class/dmi/id/board_vendor"];
  for (const path of paths) {
    if (fs.existsSync(path)) {
      return execSyncCommand("sudo", ["cat", path]);
    }
  }
  const model = getModel();
  if (model.includes("Raspberry Pi")) {
    return "Raspberry Pi Ltd";
  }
  return "Generic";
 };
 /**
 * Gets the serial number using `/sys/firmware/devicetree/base/serial-number` or `/sys/class/dmi/id/product_serial`.
 *
 * @returns {string|null} The serial number of the device or '123456' if not found.
 */
 const getSerialNumber = () => {
  const paths = ["/sys/firmware/devicetree/base/serial-number", "/sys/class/dmi/id/product_serial"];
  for (const path of paths) {
    if (fs.existsSync(path)) {
      return execSyncCommand("sudo", ["cat", path]);
    }
  }
  return "123456";
 };
 /**
 * Gets the host machine id using `/etc/machine-id`.
 *
 * @returns {string} The machine id of the system or '123456' if not found.
 */
 const getMachineId = () => {
  return execSyncCommand("cat", ["/etc/machine-id"]) || "123456";
 };
 /**
 * Gets the host name of the current system using `os.hostname()`.
 *
 * @returns {string} The host name of the system.
 */
 const getHostName = () => {
  return os.hostname();
 };
 /**
 * Gets the up time of the system in minutes using `os.uptime()`.
 *
 * @returns {number} The up time of the system in minutes.
 */
 const getUpTime = () => {
  return os.uptime() / 60;
 };
 /**
 * Gets the total available memory in gibibytes using `os.totalmem()`.
 *
 * @returns {number} The total available memory in GiB.
 */
 const getMemorySize = () => {
  return os.totalmem() / 1024 ** 3;
 };
 /**
 * Gets the current memory usage as a percentage using `os.totalmem()` and `os.freemem()`.
 *
 * @returns {number} The percentage of used memory.
 */
 const getMemoryUsage = () => {
  return ((os.totalmem() - os.freemem()) / os.totalmem()) * 100;
 };
 /**
 * Gets the CPU load average over the last 5 minutes as a percentage using `os.loadavg()` and `os.cpus()`.
 *
 * @returns {number} The CPU load average percentage over the last 5 minutes.
 */
 const getProcessorUsage = () => {
  return (os.loadavg()[1] / os.cpus().length) * 100;
 };
 /**
 * Gets the current CPU temperature using `/sys/class/thermal`.
 *
 * @returns {number|null} The CPU temperature in degrees celsius or null if nothing was found.
 */
 const getProcessorTemperature = () => {
  const thermal = "/sys/class/thermal";
  for (const zone of fs.readdirSync(thermal)) {
    const typeFile = path.join(thermal, zone, "type");
    const tempFile = path.join(thermal, zone, "temp");
    if (!fs.existsSync(typeFile) || !fs.existsSync(tempFile)) {
      continue;
    }
    const type = fs.readFileSync(typeFile, "utf8").trim();
    if (["cpu-thermal", "x86_pkg_temp", "k10temp", "acpitz"].includes(type)) {
      return parseFloat(fs.readFileSync(tempFile, "utf8").trim()) / 1000;
    }
  }
  return null;
 };
 /**
 * Gets the current display status path using `/sys/class/drm`.
 *
 * @returns {string|null} The display status path or null if nothing was found.
 */
 const getDisplayStatusPath = () => {
  const drm = "/sys/class/drm";
  for (const card of fs.readdirSync(drm)) {
    const statusFile = path.join(drm, card, "status");
    if (!fs.existsSync(statusFile)) {
      continue;
    }
    const content = fs.readFileSync(statusFile, "utf8").trim();
    if (content === "connected") {
      return path.join(drm, card);
    }
  }
  return null;
 };
 /**
 * Gets the current display power status using `wlopm` or `xset`.
 *
 * @returns {string|null} The display status as 'ON'/'OFF' or null if an error occurs.
 */
 const getDisplayStatus = () => {
  if (!HARDWARE.support.displayStatus) {
    return null;
  }
  if (session("wayland") && commandExists("wlopm")) {
    const status = execSyncCommand("wlopm", []);
    if (status !== null) {
      const out = status.split("\n")[0].split(" ");
      return out.pop().toUpperCase();
    }
  } else if (session("x11") && commandExists("xset")) {
    const status = execSyncCommand("xset", ["-q"]);
    if (status !== null) {
      const on = /Monitor is On/.test(status);
      return on ? "ON" : "OFF";
    }
  }
  return null;
 };
 /**
 * Sets the display power status using `wlopm` or `xset`.
 *
 * This function takes a desired status ('ON' or 'OFF') and executes
 * the appropriate command to set the display status.
 *
 * @param {string} status - The desired status ('ON' or 'OFF').
 * @param {function} callback - A callback function that receives the output or error.
 */
 const setDisplayStatus = (status, callback = null) => {
  if (!HARDWARE.support.displayStatus) {
    if (typeof callback === "function") callback(null, "Not supported");
    return;
  }
  if (!["ON", "OFF"].includes(status)) {
    console.error("Status must be 'ON' or 'OFF'");
    if (typeof callback === "function") callback(null, "Invalid status");
    return;
  }
  if (session("wayland") && commandExists("wlopm")) {
    execAsyncCommand("wlopm", [`--${status.toLowerCase()}`, "*"], callback);
  } else if (session("x11") && commandExists("xset")) {
    execAsyncCommand("xset", ["dpms", "force", status.toLowerCase()], callback);
  }
 };
 /**
 * Gets the current display brightness path using `/sys/class/backlight`.
 *
 * @returns {string|null} The display brightness path or null if nothing was found.
 */
 const getDisplayBrightnessPath = () => {
  const backlight = "/sys/class/backlight";
  for (const address of fs.readdirSync(backlight)) {
    const brightnessFile = path.join(backlight, address, "brightness");
    if (!fs.existsSync(brightnessFile)) {
      continue;
    }
    return path.join(backlight, address);
  }
  return null;
 };
 /**
 * Gets the maximum display brightness value using `/sys/class/backlight/.../max_brightness`.
 *
 * @returns {number|null} The brightness maximum value or null if an error occurs.
 */
 const getDisplayBrightnessMax = () => {
  if (!HARDWARE.support.displayBrightness) {
    return null;
  }
  const max = execSyncCommand("cat", [`${HARDWARE.display.brightness.path}/max_brightness`]);
  if (max !== null) {
    return parseInt(max, 10);
  }
  return null;
 };
 /**
 * Gets the current display brightness level using `/sys/class/backlight/.../brightness`.
 *
 * @returns {number|null} The brightness level as a percentage or null if an error occurs.
 */
 const getDisplayBrightness = () => {
  if (!HARDWARE.support.displayBrightness) {
    return null;
  }
  const brightness = execSyncCommand("cat", [`${HARDWARE.display.brightness.path}/brightness`]);
  if (brightness !== null) {
    const max = HARDWARE.display.brightness.max;
    return Math.round((parseInt(brightness, 10) / max) * 100);
  }
  return null;
 };
 /**
 * Sets the display brightness level using `/sys/class/backlight/.../brightness`.
 *
 * This function takes a brightness value between 1 to 100 percent,
 * maps it to the proper range and writes it to the system.
 *
 * @param {number} brightness - The desired brightness level (1-100).
 * @param {function} callback - A callback function that receives the output or error.
 */
 const setDisplayBrightness = (brightness, callback = null) => {
  if (!HARDWARE.support.displayBrightness) {
    if (typeof callback === "function") callback(null, "Not supported");
    return;
  }
  if (typeof brightness !== "number" || brightness < 1 || brightness > 100) {
    console.error("Brightness must be a number between 1 and 100");
    if (typeof callback === "function") callback(null, "Invalid brightness");
    return;
  }
  const max = HARDWARE.display.brightness.max;
  const value = Math.max(1, Math.min(Math.round((brightness / 100) * max), max));
  const proc = execAsyncCommand("sudo", ["tee", `${HARDWARE.display.brightness.path}/brightness`], callback);
  proc.stdin.write(value.toString());
  proc.stdin.end();
 };
 /**
 * Gets the keyboard visibility using global properties.
 *
 * @returns {string|null} The keyboard visibility as 'ON'/'OFF' or null if an error occurs.
 */
 const getKeyboardVisibility = () => {
  if (!HARDWARE.support.keyboardVisibility) {
    return null;
  }
  return HARDWARE.keyboard.visibility ? "ON" : "OFF";
 };
 /**
 * Sets the keyboard visibility using `dbus-send`.
 *
 * This function takes a desired visibility ('ON' or 'OFF') and executes
 * the appropriate command to show or hide the keyboard.
 *
 * @param {boolean} visibility - The desired visibility ('ON' or 'OFF').
 * @param {function} callback - A callback function that receives the output or error.
 */
 const setKeyboardVisibility = (visibility, callback = null) => {
  if (!HARDWARE.support.keyboardVisibility) {
    if (typeof callback === "function") callback(null, "Not supported");
    return;
  }
  if (!["ON", "OFF"].includes(visibility)) {
    console.error("Visibility must be 'ON' or 'OFF'");
    if (typeof callback === "function") callback(null, "Invalid visibility");
    return;
  }
  const visible = visibility === "ON";
  HARDWARE.keyboard.visibility = visible;
  dbusCall("/sm/puri/OSK0", "SetVisible", [`boolean:${visible}`], callback);
 };
 /**
 * Checks if system upgrades are available using `apt`.
 *
 * @returns {Array<string>} A list of package names that are available for upgrade.
 */
 const checkPackageUpgrades = () => {
  if (!commandExists("apt")) {
    return [];
  }
  const output = execSyncCommand("apt", ["list", "--upgradable", "2>/dev/null"]);
  const packages = (output || "").trim().split("\n");
  packages.shift();
  return packages;
 };
 /**
 * Shuts down the system using `sudo shutdown -h now`.
 *
 * This function executes the command asynchronously.
 * The output of the command will be provided through the callback function.
 *
 * @param {function} callback - A callback function that receives the output or error.
 */
 const shutdownSystem = (callback = null) => {
  execAsyncCommand("sudo", ["shutdown", "-h", "now"], callback);
 };
 /**
 * Reboots the system using `sudo reboot`.
 *
 * This function executes the command asynchronously.
 * The output of the command will be provided through the callback function.
 *
 * @param {function} callback - A callback function that receives the output or error.
 */
 const rebootSystem = (callback = null) => {
  execAsyncCommand("sudo", ["reboot"], callback);
 };
 /**
 * Checks if a process is running using `pidof`.
 *
 * @param {string} name - The process name to check.
 * @returns {boolean} Returns true if the process runs.
 */
 const processRuns = (name) => {
  try {
    return !!process.execSync(`pidof ${name}`, { encoding: "utf8" });
  } catch {}
  return false;
 };
 /**
 * Checks if a command is available using `which`.
 *
 * @param {string} name - The command name to check.
 * @returns {boolean} Returns true if the command is available.
 */
 const commandExists = (name) => {
  try {
    return !!process.execSync(`which ${name}`, { encoding: "utf8" });
  } catch {}
  return false;
 };
 /**
 * Executes a command synchronously and returns the output.
 *
 * @param {string} cmd - The command to execute.
 * @param {Array<string>} args - The arguments for the command.
 * @returns {string|null} The output of the command or null if an error occurs.
 */
 const execSyncCommand = (cmd, args = []) => {
  try {
    const output = process.execSync([cmd, ...args].join(" "), { encoding: "utf8" });
    return output.trim().replace(/\0/g, "");
  } catch (error) {
    console.error("Execute Sync:", error.message);
  }
  return null;
 };
 /**
 * Executes a command asynchronously.
 *
 * @param {string} cmd - The command to execute.
 * @param {Array<string>} args - The arguments for the command.
 * @param {function} callback - A callback function that receives the output or error.
 * @returns {object} The spawned process object.
 */
 const execAsyncCommand = (cmd, args = [], callback = null) => {
  let errorOutput = "";
  let successOutput = "";
  let proc = process.spawn(cmd, args);
  proc.stderr.on("data", (data) => {
    if (data) {
      errorOutput += data.toString();
    }
  });
  proc.stdout.on("data", (data) => {
    if (data) {
      successOutput += data.toString();
    }
  });
  proc.on("close", (code) => {
    try {
      if (typeof callback === "function") {
        if (code === 0) {
          callback(successOutput.trim().replace(/\0/g, ""), null);
        } else {
          callback(null, errorOutput.trim().replace(/\0/g, ""));
        }
      }
    } catch (error) {
      console.error("Execute Async:", error.message);
      if (typeof callback === "function") {
        callback(null, error.message);
      }
    }
  });
  return proc;
 };
 /**
 * Executes a D-Bus method call synchronously using `dbus-send`.
 *
 * @param {string} path - The D-Bus object path.
 * @param {string} method - The D-Bus method name.
 * @param {Array<string>} values - The argument values for the D-Bus method.
 * @param {function} callback - A callback function that receives the output or error.
 */
 const dbusCall = (path, method, values, callback = null) => {
  const cmd = "dbus-send";
  const iface = path.slice(1).replace(/\//g, ".");
  const dest = `${iface} ${path} ${iface}.${method} ${values.join(" ")}`;
  const args = ["--print-reply", "--type=method_call", `--dest=${dest}`];
  try {
    const output = process.execSync([cmd, ...args].join(" "), { encoding: "utf8" });
    if (typeof callback === "function") {
      callback(output.trim().replace(/\0/g, ""), null);
    }
  } catch (error) {
    console.error("Call D-Bus:", error.message);
    if (typeof callback === "function") {
      callback(null, error.message);
    }
  }
 };
 /**
 * Monitors D-Bus property changes asynchronously using `dbus-monitor`.
 *
 * @param {string} path - The D-Bus object path.
 * @param {function} callback - A callback function that receives the changed property.
 * @returns {object} The spawned process object.
 */
 const dbusMonitor = (path, callback) => {
  const cmd = "dbus-monitor";
  const args = [`interface='org.freedesktop.DBus.Properties',member='PropertiesChanged',path='${path}'`];
  const proc = process.spawn(cmd, args);
  proc.stdout.on("data", (data) => {
    try {
      const signal = data.toString();
      if (signal.includes("member=PropertiesChanged") && signal.includes(`path=${path}`)) {
        const dicts = [...signal.matchAll(/dict entry\(\s*([^)]*?)\)/g)].map((dict) => dict[1].trim());
        if (dicts.length) {
          dicts.forEach((dict) => {
            const key = dict.match(/string "(.*?)"/);
            const value = dict.match(/(?<=variant\s+)(.*)/);
            if (key && value && typeof callback === "function") {
              callback({ [key[1].trim()]: value[1].trim().split(" ").pop() }, null);
            }
          });
        } else {
          callback({ Visible: `${HARDWARE.keyboard.visibility}` }, null);
        }
      }
    } catch (error) {
      console.error("Monitor D-Bus:", error.message);
      if (typeof callback === "function") {
        callback(null, error.message);
      }
    }
  });
  proc.stderr.on("data", (data) => {
    if (data) {
      console.error("Monitor D-Bus:", data.toString());
      if (typeof callback === "function") {
        callback(null, data.toString());
      }
    }
  });
  return proc;
 };
 module.exports = {
  init,
  update,
  getModel,
  getVendor,
  getSerialNumber,
  getMachineId,
  getHostName,
  getUpTime,
  getMemorySize,
  getMemoryUsage,
  getProcessorUsage,
  getProcessorTemperature,
  getDisplayStatusPath,
  getDisplayStatus,
  setDisplayStatus,
  getDisplayBrightnessPath,
  getDisplayBrightnessMax,
  getDisplayBrightness,
  setDisplayBrightness,
  getKeyboardVisibility,
  setKeyboardVisibility,
  checkPackageUpgrades,
  shutdownSystem,
  rebootSystem,
 };
@@ -1,762 +0,0 @@
 const mqtt = require("mqtt");
 const hardware = require("./hardware");
 const { app } = require("electron");
 global.INTEGRATION = global.INTEGRATION || {
  initialized: false,
  status: "offline",
 };
 /**
 * Initializes the integration with the provided arguments.
 *
 * @param {Object} args - The command-line arguments to customize the initialization process.
 * @returns {boolean} Returns true if the initialization was successful.
 */
 const init = async (args) => {
  if (!args.mqtt_url) {
    return false;
  }
  if (!/^mqtts?:\/\//.test(args.mqtt_url)) {
    console.error("Please provide the '--mqtt-url' parameter with mqtt(s)");
    return app.quit();
  }
  const url = new URL(args.mqtt_url);
  const user = args.mqtt_user ? args.mqtt_user : null;
  const password = args.mqtt_password ? args.mqtt_password : null;
  const discovery = args.mqtt_discovery ? args.mqtt_discovery : "homeassistant";
  const model = hardware.getModel();
  const vendor = hardware.getVendor();
  const hostName = hardware.getHostName();
  const serialNumber = hardware.getSerialNumber();
  const serialNumberSuffix = serialNumber.slice(-6);
  const deviceId = serialNumberSuffix.toUpperCase().replace(/[^A-Z0-9]/g, "");
  const deviceName = hostName.charAt(0).toUpperCase() + hostName.slice(1);
  // Init globals
  INTEGRATION.node = `rpi_${deviceId}`;
  INTEGRATION.discovery = discovery;
  INTEGRATION.device = {
    name: `TouchKio ${deviceName}`,
    model: model,
    manufacturer: vendor,
    serial_number: serialNumber,
    identifiers: [INTEGRATION.node],
    sw_version: `${app.getName()}-v${app.getVersion()}`,
  };
  // Connection settings
  const options = user === null || password == null ? null : { username: user, password: password };
  const masked = password === null ? "null" : "*".repeat(password.length);
  console.log("MQTT Connecting:", `${user}:${masked}@${url.toString()}`);
  INTEGRATION.client = mqtt.connect(url.toString(), options);
  // Client connected
  INTEGRATION.client
    .on("connect", () => {
      console.log(`MQTT Connected: ${url.toString()}\n`);
      // Init client controls
      initShutdown(INTEGRATION.client);
      initReboot(INTEGRATION.client);
      initRefresh(INTEGRATION.client);
      initKiosk(INTEGRATION.client);
      initDisplay(INTEGRATION.client);
      initKeyboard(INTEGRATION.client);
      // Init client sensors
      initModel(INTEGRATION.client);
      initSerialNumber(INTEGRATION.client);
      initHostName(INTEGRATION.client);
      initUpTime(INTEGRATION.client);
      initMemorySize(INTEGRATION.client);
      initMemoryUsage(INTEGRATION.client);
      initProcessorUsage(INTEGRATION.client);
      initProcessorTemperature(INTEGRATION.client);
      initPackageUpgrades(INTEGRATION.client);
      initHeartbeat(INTEGRATION.client);
      initLastActive(INTEGRATION.client);
      // Integration initialized
      INTEGRATION.initialized = true;
      INTEGRATION.status = "online";
    })
    .on("error", (error) => {
      console.error("MQTT:", error);
      INTEGRATION.status = "offline";
    });
  // Update sensor states from notifiers
  HARDWARE.display.notifiers.push(() => {
    updateDisplay(INTEGRATION.client);
  });
  HARDWARE.keyboard.notifiers.push(() => {
    updateKeyboard(INTEGRATION.client);
  });
  // Update time sensors periodically (30s)
  setInterval(() => {
    updateHeartbeat(INTEGRATION.client);
    updateLastActive(INTEGRATION.client);
  }, 30 * 1000);
  // Update system sensors periodically (1min)
  setInterval(() => {
    update();
  }, 60 * 1000);
  // Update package sensors periodically (60min)
  setInterval(() => {
    updatePackageUpgrades(INTEGRATION.client);
  }, 3600 * 1000);
  return true;
 };
 /**
 * Updates the shared integration properties.
 */
 const update = () => {
  if (!INTEGRATION.initialized) {
    return;
  }
  // Update client sensors
  updateKiosk(INTEGRATION.client);
  updateUpTime(INTEGRATION.client);
  updateLastActive(INTEGRATION.client);
  updateMemoryUsage(INTEGRATION.client);
  updateProcessorUsage(INTEGRATION.client);
  updateProcessorTemperature(INTEGRATION.client);
 };
 /**
 * Initializes the shutdown button and handles the execute logic.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initShutdown = (client) => {
  const root = `${INTEGRATION.discovery}/button/${INTEGRATION.node}/shutdown`;
  const config = {
    name: "Shutdown",
    unique_id: `${INTEGRATION.node}_shutdown`,
    command_topic: `${root}/execute`,
    icon: "mdi:power",
    device: INTEGRATION.device,
  };
  client
    .publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true })
    .on("message", (topic, message) => {
      if (topic === `${root}/execute`) {
        console.log("Shutdown system...");
        hardware.setDisplayStatus("ON");
        hardware.shutdownSystem();
      }
    })
    .subscribe(`${root}/execute`);
 };
 /**
 * Initializes the reboot button and handles the execute logic.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initReboot = (client) => {
  const root = `${INTEGRATION.discovery}/button/${INTEGRATION.node}/reboot`;
  const config = {
    name: "Reboot",
    unique_id: `${INTEGRATION.node}_reboot`,
    command_topic: `${root}/execute`,
    icon: "mdi:restart",
    device: INTEGRATION.device,
  };
  client
    .publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true })
    .on("message", (topic, message) => {
      if (topic === `${root}/execute`) {
        console.log("Rebooting system...");
        hardware.setDisplayStatus("ON");
        hardware.rebootSystem();
      }
    })
    .subscribe(`${root}/execute`);
 };
 /**
 * Initializes the refresh button and handles the execute logic.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initRefresh = (client) => {
  const root = `${INTEGRATION.discovery}/button/${INTEGRATION.node}/refresh`;
  const config = {
    name: "Refresh",
    unique_id: `${INTEGRATION.node}_refresh`,
    command_topic: `${root}/execute`,
    icon: "mdi:web-refresh",
    device: INTEGRATION.device,
  };
  client
    .publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true })
    .on("message", (topic, message) => {
      if (topic === `${root}/execute`) {
        console.log("Refreshing webview...");
        hardware.setDisplayStatus("ON");
        WEBVIEW.view.webContents.reloadIgnoringCache();
      }
    })
    .subscribe(`${root}/execute`);
 };
 /**
 * Initializes the kiosk select status and handles the execute logic.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initKiosk = (client) => {
  const root = `${INTEGRATION.discovery}/select/${INTEGRATION.node}/kiosk`;
  const config = {
    name: `Kiosk`,
    unique_id: `${INTEGRATION.node}_kiosk`,
    command_topic: `${root}/set`,
    state_topic: `${root}/status`,
    value_template: "{{ value }}",
    options: ["Framed", "Fullscreen", "Maximized", "Minimized", "Terminated"],
    icon: "mdi:overscan",
    device: INTEGRATION.device,
  };
  client
    .publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true })
    .on("message", (topic, message) => {
      if (topic === `${root}/set`) {
        const status = message.toString();
        console.log("Set Kiosk Status:", status);
        hardware.setDisplayStatus("ON");
        switch (status) {
          case "Framed":
            WEBVIEW.window.restore();
            WEBVIEW.window.unmaximize();
            WEBVIEW.window.setFullScreen(false);
            break;
          case "Fullscreen":
            WEBVIEW.window.restore();
            WEBVIEW.window.unmaximize();
            WEBVIEW.window.setFullScreen(true);
            break;
          case "Maximized":
            WEBVIEW.window.restore();
            WEBVIEW.window.setFullScreen(false);
            WEBVIEW.window.maximize();
            break;
          case "Minimized":
            WEBVIEW.window.restore();
            WEBVIEW.window.setFullScreen(false);
            WEBVIEW.window.minimize();
            break;
          case "Terminated":
            app.quit();
        }
      }
    })
    .subscribe(`${root}/set`);
  updateKiosk(client);
 };
 /**
 * Updates the kiosk status via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateKiosk = (client) => {
  const kiosk = WEBVIEW.status;
  const root = `${INTEGRATION.discovery}/select/${INTEGRATION.node}/kiosk`;
  if (kiosk !== null) {
    client.publish(`${root}/status`, `${kiosk}`, { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the display status, brightness and handles the execute logic.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initDisplay = (client) => {
  if (!HARDWARE.support.displayStatus) {
    return;
  }
  const root = `${INTEGRATION.discovery}/light/${INTEGRATION.node}/display`;
  const config = {
    name: `Display`,
    unique_id: `${INTEGRATION.node}_display`,
    command_topic: `${root}/set`,
    state_topic: `${root}/status`,
    icon: "mdi:monitor-shimmer",
    platform: "light",
    device: INTEGRATION.device,
  };
  if (HARDWARE.support.displayBrightness) {
    config.brightness_scale = 100;
    config.brightness_command_topic = `${root}/brightness/set`;
    config.brightness_state_topic = `${root}/brightness/status`;
  }
  client
    .publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true })
    .on("message", (topic, message) => {
      if (topic === `${root}/set`) {
        const status = message.toString();
        console.log("Set Display Status:", status);
        hardware.setDisplayStatus(status);
      } else if (topic === `${root}/brightness/set`) {
        const brightness = parseInt(message, 10);
        console.log("Set Display Brightness:", brightness);
        hardware.setDisplayBrightness(brightness);
      }
    })
    .subscribe(`${root}/set`)
    .subscribe(`${root}/brightness/set`);
  updateDisplay(client);
 };
 /**
 * Updates the display status, brightness via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateDisplay = (client) => {
  const status = hardware.getDisplayStatus();
  const brightness = hardware.getDisplayBrightness();
  const root = `${INTEGRATION.discovery}/light/${INTEGRATION.node}/display`;
  if (status !== null) {
    client.publish(`${root}/status`, `${status}`, { qos: 1, retain: true });
  }
  if (brightness !== null) {
    client.publish(`${root}/brightness/status`, `${brightness}`, { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the keyboard visibility and handles the execute logic.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initKeyboard = (client) => {
  if (!HARDWARE.support.keyboardVisibility) {
    return;
  }
  const root = `${INTEGRATION.discovery}/switch/${INTEGRATION.node}/keyboard`;
  const config = {
    name: `Keyboard`,
    unique_id: `${INTEGRATION.node}_keyboard`,
    command_topic: `${root}/set`,
    state_topic: `${root}/status`,
    icon: "mdi:keyboard-close-outline",
    device: INTEGRATION.device,
  };
  client
    .publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true })
    .on("message", (topic, message) => {
      if (topic === `${root}/set`) {
        const status = message.toString();
        console.log("Set Keyboard Visibility:", status);
        hardware.setKeyboardVisibility(status);
        switch (status) {
          case "OFF":
            WEBVIEW.window.restore();
            WEBVIEW.window.unmaximize();
            WEBVIEW.window.setFullScreen(true);
            break;
          case "ON":
            WEBVIEW.window.restore();
            WEBVIEW.window.setFullScreen(false);
            WEBVIEW.window.maximize();
            break;
        }
      }
    })
    .subscribe(`${root}/set`);
  updateKeyboard(client);
 };
 /**
 * Updates the keyboard visibility via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateKeyboard = (client) => {
  const visibility = hardware.getKeyboardVisibility();
  const root = `${INTEGRATION.discovery}/switch/${INTEGRATION.node}/keyboard`;
  if (visibility !== null) {
    client.publish(`${root}/status`, `${visibility}`, { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the model sensor.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initModel = (client) => {
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/model`;
  const config = {
    name: `Model`,
    unique_id: `${INTEGRATION.node}_model`,
    state_topic: `${root}/status`,
    value_template: "{{ value }}",
    icon: "mdi:raspberry-pi",
    device: INTEGRATION.device,
  };
  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
  updateModel(client);
 };
 /**
 * Updates the model sensor via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateModel = (client) => {
  const model = hardware.getModel();
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/model`;
  if (model !== null) {
    client.publish(`${root}/status`, `${model}`, { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the serial number sensor.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initSerialNumber = (client) => {
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/serial_number`;
  const config = {
    name: `Serial Number`,
    unique_id: `${INTEGRATION.node}_serial_number`,
    state_topic: `${root}/status`,
    value_template: "{{ value }}",
    icon: "mdi:hexadecimal",
    device: INTEGRATION.device,
  };
  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
  updateSerialNumber(client);
 };
 /**
 * Updates the serial number sensor via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateSerialNumber = (client) => {
  const serialNumber = hardware.getSerialNumber();
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/serial_number`;
  if (serialNumber !== null) {
    client.publish(`${root}/status`, `${serialNumber}`, { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the host name sensor.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initHostName = (client) => {
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/host_name`;
  const config = {
    name: `Host Name`,
    unique_id: `${INTEGRATION.node}_host_name`,
    state_topic: `${root}/status`,
    value_template: "{{ value }}",
    icon: "mdi:console-network",
    device: INTEGRATION.device,
  };
  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
  updateHostName(client);
 };
 /**
 * Updates the host name sensor via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateHostName = (client) => {
  const hostName = hardware.getHostName();
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/host_name`;
  if (hostName !== null) {
    client.publish(`${root}/status`, `${hostName}`, { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the up time sensor.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initUpTime = (client) => {
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/up_time`;
  const config = {
    name: `Up Time`,
    unique_id: `${INTEGRATION.node}_up_time`,
    state_topic: `${root}/status`,
    value_template: "{{ (value | float) | round(0) }}",
    unit_of_measurement: "min",
    icon: "mdi:timeline-clock",
    device: INTEGRATION.device,
  };
  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
  updateUpTime(client);
 };
 /**
 * Updates the up time sensor via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateUpTime = (client) => {
  const upTime = hardware.getUpTime();
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/up_time`;
  if (upTime !== null) {
    client.publish(`${root}/status`, `${upTime}`, { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the memory size sensor.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initMemorySize = (client) => {
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/memory_size`;
  const config = {
    name: `Memory Size`,
    unique_id: `${INTEGRATION.node}_memory_size`,
    state_topic: `${root}/status`,
    value_template: "{{ (value | float) | round(2) }}",
    unit_of_measurement: "GiB",
    icon: "mdi:memory",
    device: INTEGRATION.device,
  };
  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
  updateMemorySize(client);
 };
 /**
 * Updates the memory size sensor via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateMemorySize = (client) => {
  const memorySize = hardware.getMemorySize();
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/memory_size`;
  if (memorySize !== null) {
    client.publish(`${root}/status`, `${memorySize}`, { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the memory usage sensor.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initMemoryUsage = (client) => {
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/memory_usage`;
  const config = {
    name: `Memory Usage`,
    unique_id: `${INTEGRATION.node}_memory_usage`,
    state_topic: `${root}/status`,
    value_template: "{{ (value | float) | round(0) }}",
    unit_of_measurement: "%",
    icon: "mdi:memory-arrow-down",
    device: INTEGRATION.device,
  };
  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
  updateMemoryUsage(client);
 };
 /**
 * Updates the memory usage sensor via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateMemoryUsage = (client) => {
  const memoryUsage = hardware.getMemoryUsage();
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/memory_usage`;
  if (memoryUsage !== null) {
    client.publish(`${root}/status`, `${memoryUsage}`, { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the processor usage sensor.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initProcessorUsage = (client) => {
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/processor_usage`;
  const config = {
    name: `Processor Usage`,
    unique_id: `${INTEGRATION.node}_processor_usage`,
    state_topic: `${root}/status`,
    value_template: "{{ (value | float) | round(0) }}",
    unit_of_measurement: "%",
    icon: "mdi:cpu-64-bit",
    device: INTEGRATION.device,
  };
  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
  updateProcessorUsage(client);
 };
 /**
 * Updates the processor usage sensor via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateProcessorUsage = (client) => {
  const processorUsage = hardware.getProcessorUsage();
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/processor_usage`;
  if (processorUsage !== null) {
    client.publish(`${root}/status`, `${processorUsage}`, { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the processor temperature sensor.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initProcessorTemperature = (client) => {
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/processor_temperature`;
  const config = {
    name: `Processor Temperature`,
    unique_id: `${INTEGRATION.node}_processor_temperature`,
    state_topic: `${root}/status`,
    value_template: "{{ (value | float) | round(0) }}",
    unit_of_measurement: "°C",
    icon: "mdi:radiator",
    device: INTEGRATION.device,
  };
  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
  updateProcessorTemperature(client);
 };
 /**
 * Updates the processor temperature sensor via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateProcessorTemperature = (client) => {
  const processorTemperature = hardware.getProcessorTemperature();
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/processor_temperature`;
  if (processorTemperature !== null) {
    client.publish(`${root}/status`, `${processorTemperature}`, { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the package upgrades sensor.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initPackageUpgrades = (client) => {
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/package_upgrades`;
  const config = {
    name: `Package Upgrades`,
    unique_id: `${INTEGRATION.node}_package_upgrades`,
    state_topic: `${root}/status`,
    json_attributes_topic: `${root}/attributes`,
    value_template: "{{ value }}",
    icon: "mdi:package-down",
    device: INTEGRATION.device,
  };
  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
  updatePackageUpgrades(client);
 };
 /**
 * Updates the package upgrades sensor via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updatePackageUpgrades = (client) => {
  const packages = hardware.checkPackageUpgrades();
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/package_upgrades`;
  if (packages !== null) {
    const attributes = {
      total: packages.length,
      packages: packages.map((pkg) => pkg.replace(/\s*\[.*?\]\s*/g, "").trim()),
    };
    client.publish(`${root}/status`, `${attributes.total}`, { qos: 1, retain: true });
    client.publish(`${root}/attributes`, JSON.stringify(attributes), { qos: 1, retain: true });
  }
 };
 /**
 * Initializes the heartbeat sensor.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initHeartbeat = (client) => {
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/heartbeat`;
  const config = {
    name: `Heartbeat`,
    unique_id: `${INTEGRATION.node}_heartbeat`,
    state_topic: `${root}/status`,
    value_template: "{{ value }}",
    icon: "mdi:heart-flash",
    device: INTEGRATION.device,
  };
  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
  updateHeartbeat(client);
 };
 /**
 * Updates the heartbeat sensor via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateHeartbeat = (client) => {
  const now = new Date();
  const local = new Date(now.getTime() - now.getTimezoneOffset() * 60 * 1000);
  const heartbeat = local.toISOString().replace(/\.\d{3}Z$/, "");
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/heartbeat`;
  client.publish(`${root}/status`, `${heartbeat}`, { qos: 1, retain: true });
 };
 /**
 * Initializes the last active sensor.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const initLastActive = (client) => {
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/last_active`;
  const config = {
    name: `Last Active`,
    unique_id: `${INTEGRATION.node}_last_active`,
    state_topic: `${root}/status`,
    value_template: "{{ (value | float) | round(0) }}",
    unit_of_measurement: "min",
    icon: "mdi:gesture-tap-hold",
    device: INTEGRATION.device,
  };
  client.publish(`${root}/config`, JSON.stringify(config), { qos: 1, retain: true });
  updateLastActive(client);
 };
 /**
 * Updates the last active sensor via the mqtt connection.
 *
 * @param {Object} client - Instance of the mqtt client.
 */
 const updateLastActive = (client) => {
  const now = new Date();
  const then = WEBVIEW.pointer.time;
  const lastActive = Math.abs(now - then) / (1000 * 60);
  const root = `${INTEGRATION.discovery}/sensor/${INTEGRATION.node}/last_active`;
  client.publish(`${root}/status`, `${lastActive}`, { qos: 1, retain: true });
 };
 module.exports = {
  init,
  update,
 };
@@ -1,320 +0,0 @@
 const path = require("path");
 const hardware = require("./hardware");
 const integration = require("./integration");
 const { app, screen, nativeTheme, ipcMain, BaseWindow, WebContentsView } = require("electron");
 global.WEBVIEW = global.WEBVIEW || {
  initialized: false,
  status: "offline",
  locked: false,
  pointer: {
    position: {},
    time: new Date(),
  },
 };
 /**
 * Initializes the webview with the provided arguments.
 *
 * @param {Object} args - The command-line arguments to customize the initialization process.
 * @returns {boolean} Returns true if the initialization was successful.
 */
 const init = async (args) => {
  if (!args.web_url) {
    console.error("Please provide the '--web-url' parameter");
    return app.quit();
  }
  if (!/^https?:\/\//.test(args.web_url)) {
    console.error("Please provide the '--web-url' parameter with http(s)");
    return app.quit();
  }
  const url = new URL(args.web_url);
  const theme = ["light", "dark"].includes(args.web_theme) ? args.web_theme : "dark";
  const zoom = !isNaN(parseFloat(args.web_zoom)) ? parseFloat(args.web_zoom) : 1.25;
  const widget = args.web_widget ? args.web_widget === "true" : true;
  // Init global layout
  WEBVIEW.viewZoom = zoom;
  WEBVIEW.viewTheme = theme;
  WEBVIEW.widgetTheme = theme;
  WEBVIEW.widgetEnabled = widget;
  nativeTheme.themeSource = WEBVIEW.viewTheme;
  // Init global root window
  WEBVIEW.window = new BaseWindow({
    title: `TouchKio - ${url.host}`,
    icon: path.join(__dirname, "..", "img", "icon.png"),
  });
  WEBVIEW.window.setMenuBarVisibility(false);
  WEBVIEW.window.setFullScreen(true);
  // Init global webview
  WEBVIEW.view = new WebContentsView({
    webPreferences: {
      nodeIntegration: false,
      contextIsolation: true,
    },
  });
  WEBVIEW.window.contentView.addChildView(WEBVIEW.view);
  WEBVIEW.view.webContents.loadURL(url.toString());
  WEBVIEW.view.setBackgroundColor("#FFFFFFFF");
  // Init global widget
  WEBVIEW.widget = new WebContentsView({
    transparent: true,
    webPreferences: {
      nodeIntegration: true,
      contextIsolation: false,
    },
  });
  WEBVIEW.window.contentView.addChildView(WEBVIEW.widget);
  WEBVIEW.widget.webContents.loadFile(path.join(__dirname, "widget.html"));
  WEBVIEW.widget.setBackgroundColor("#00000000");
  // Register events
  windowEvents();
  widgetEvents();
  domEvents();
  appEvents();
  return true;
 };
 /**
 * Updates the shared webview properties.
 */
 const update = () => {
  if (!WEBVIEW.initialized) {
    return;
  }
  // Update window status
  if (WEBVIEW.window.isFullScreen()) {
    WEBVIEW.status = "Fullscreen";
  } else if (WEBVIEW.window.isMinimized()) {
    WEBVIEW.status = "Minimized";
  } else if (WEBVIEW.window.isMaximized()) {
    WEBVIEW.status = "Maximized";
  } else {
    WEBVIEW.status = "Framed";
  }
  // Update widget status
  if (!HARDWARE.support.keyboardVisibility) {
    WEBVIEW.widget.webContents.send("button-hide", { id: "keyboard" });
  }
  // Update integration sensor
  console.log("Update Kiosk Status:", WEBVIEW.status);
  integration.update();
 };
 /**
 * Register window events and handler.
 */
 const windowEvents = () => {
  // Handle window resize events
  const resize = () => {
    const window = WEBVIEW.window.getBounds();
    const widget = { width: 60, height: 200 };
    // Update view size
    WEBVIEW.view.setBounds({
      x: 0,
      y: 0,
      width: window.width,
      height: window.height,
    });
    WEBVIEW.view.webContents.setZoomFactor(WEBVIEW.viewZoom);
    WEBVIEW.view.webContents.focus();
    // Update widget size
    if (WEBVIEW.widgetEnabled) {
      WEBVIEW.widget.setBounds({
        x: window.width - 15,
        y: parseInt(window.height / 2 - widget.height / 2),
        width: widget.width,
        height: widget.height,
      });
      WEBVIEW.widget.webContents.send("data-theme", { theme: "hidden" });
    }
  };
  WEBVIEW.window.on("ready-to-show", resize);
  WEBVIEW.window.on("resize", resize);
  resize();
  // Handle window focus events
  WEBVIEW.window.on("focus", () => {
    if (WEBVIEW.locked) {
      hardware.setDisplayStatus("ON");
      WEBVIEW.window.blur();
    }
    WEBVIEW.locked = false;
  });
  HARDWARE.display.notifiers.push(() => {
    WEBVIEW.locked = hardware.getDisplayStatus() === "OFF";
    if (WEBVIEW.locked) {
      WEBVIEW.window.blur();
    }
  });
  // Handle window status updates
  WEBVIEW.window.on("minimize", update);
  WEBVIEW.window.on("restore", update);
  WEBVIEW.window.on("maximize", update);
  WEBVIEW.window.on("unmaximize", update);
  WEBVIEW.window.on("enter-full-screen", update);
  WEBVIEW.window.on("leave-full-screen", update);
  // Handle window touch events for activity tracking
  setInterval(() => {
    const posOld = WEBVIEW.pointer.position;
    const posNew = screen.getCursorScreenPoint();
    if (posOld.x !== posNew.x || posOld.y !== posNew.y) {
      const now = new Date();
      const then = WEBVIEW.pointer.time;
      // Update integration sensor
      WEBVIEW.pointer.time = now;
      if (Math.abs(now - then) / 1000 > 30) {
        console.log("Update Last Active");
        integration.update();
      }
    }
    WEBVIEW.pointer.position = posNew;
  }, 1 * 1000);
 };
 /**
 * Register widget events and handler.
 */
 const widgetEvents = () => {
  if (!WEBVIEW.widgetEnabled) {
    return;
  }
  // Handle widget focus events
  WEBVIEW.widget.webContents.on("focus", () => {
    const window = WEBVIEW.window.getBounds();
    const widget = WEBVIEW.widget.getBounds();
    // Show widget
    WEBVIEW.widget.setBounds({
      x: window.width - 60,
      y: widget.y,
      width: widget.width,
      height: widget.height,
    });
    WEBVIEW.widget.webContents.send("data-theme", { theme: WEBVIEW.widgetTheme });
  });
  // Handle widget blur events
  WEBVIEW.widget.webContents.on("blur", () => {
    const window = WEBVIEW.window.getBounds();
    const widget = WEBVIEW.widget.getBounds();
    // Hide widget
    WEBVIEW.widget.setBounds({
      x: window.width - 15,
      y: widget.y,
      width: widget.width,
      height: widget.height,
    });
    WEBVIEW.widget.webContents.send("data-theme", { theme: "hidden" });
  });
  // Handle widget button click events
  ipcMain.on("button-click", (e, button) => {
    switch (button.id) {
      case "refresh":
        WEBVIEW.view.webContents.reloadIgnoringCache();
        break;
      case "fullscreen":
        if (WEBVIEW.window.isFullScreen()) {
          WEBVIEW.window.restore();
          WEBVIEW.window.unmaximize();
          WEBVIEW.window.setFullScreen(false);
        } else {
          WEBVIEW.window.restore();
          WEBVIEW.window.unmaximize();
          WEBVIEW.window.setFullScreen(true);
        }
        break;
      case "minimize":
        WEBVIEW.window.restore();
        WEBVIEW.window.setFullScreen(false);
        WEBVIEW.window.minimize();
        break;
      case "keyboard":
        const toggle = hardware.getKeyboardVisibility() === "ON" ? "OFF" : "ON";
        hardware.setKeyboardVisibility(toggle);
        switch (toggle) {
          case "OFF":
            WEBVIEW.window.restore();
            WEBVIEW.window.unmaximize();
            WEBVIEW.window.setFullScreen(true);
            break;
          case "ON":
            WEBVIEW.window.restore();
            WEBVIEW.window.setFullScreen(false);
            WEBVIEW.window.maximize();
            break;
        }
        break;
    }
  });
 };
 /**
 * Register dom events and handler.
 */
 const domEvents = () => {
  // Enable webview touch emulation
  WEBVIEW.view.webContents.debugger.attach("1.1");
  WEBVIEW.view.webContents.debugger.sendCommand("Emulation.setEmitTouchEventsForMouse", {
    configuration: "mobile",
    enabled: true,
  });
  // Disable webview hyperlinks
  WEBVIEW.view.webContents.setWindowOpenHandler(() => {
    return { action: "deny" };
  });
  // Remove webview scrollbar
  WEBVIEW.view.webContents.on("dom-ready", () => {
    WEBVIEW.view.webContents.insertCSS("::-webkit-scrollbar { display: none; }");
  });
  // Webview fully loaded
  WEBVIEW.view.webContents.on("did-finish-load", () => {
    // view.webContents.openDevTools();
    WEBVIEW.initialized = true;
    update();
  });
 };
 /**
 * Register app events and handler.
 */
 const appEvents = () => {
  // Handle signal and exit events
  process.on("SIGINT", app.quit);
  app.on("before-quit", () => {
    WEBVIEW.status = "Terminated";
    integration.update();
  });
  // Handle multiple instances
  app.on("second-instance", () => {
    if (WEBVIEW.window.isMinimized()) {
      WEBVIEW.window.restore();
    }
    WEBVIEW.window.focus();
  });
 };
 module.exports = {
  init,
  update,
 };
Author	SHA1	Message	Date
leukipp	e195a56739	build: update version	2025-10-10 21:29:38 +02:00
leukipp	d86a5385a8	docs: update readme	2025-10-10 19:11:29 +02:00
leukipp	3ce1265c8a	docs: update hardware	2025-10-10 19:10:43 +02:00
leukipp	c2bf551834	ref: update images	2025-10-10 19:08:29 +02:00
leukipp	785a97721a	build: update dependencies	2025-10-09 14:19:57 +02:00
leukipp	05c9d98b61	feat: add mqtt version diagnostic #91	2025-10-09 13:43:20 +02:00
leukipp	9c26d9d8bb	ref: add mqtt attributes	2025-10-09 13:09:30 +02:00
leukipp	ad7d3fd3ff	feat: early app updates #96	2025-10-08 20:47:59 +02:00
leukipp	f666ed57ab	ref: widget focus handling	2025-10-08 20:13:48 +02:00
leukipp	c0b1a6e9ce	feat: add mqtt error diagnostic #91	2025-10-07 21:48:49 +02:00
leukipp	19e51e349c	fix: use mqtt last will #84	2025-10-07 09:59:48 +02:00
leukipp	5d012bd637	feat: extended theme switching #87	2025-10-07 09:17:57 +02:00
leukipp	01c7411ddc	feat: use box for mqtt zoom #90	2025-10-06 19:17:35 +02:00
leukipp	3e4d96536f	feat: dynamic status bar #94	2025-10-06 18:55:51 +02:00
leukipp	4bcb2c4e89	feat: auto on-screen keyboard #85	2025-09-30 21:26:39 +02:00
leukipp	b2b87888e4	ref: keyboard window status handling	2025-09-30 17:31:00 +02:00
leukipp	164ef2838c	docs: add sponsor	2025-09-29 10:20:40 +02:00
leukipp	ae2633800d	ref: allow electron flags	2025-09-29 10:10:12 +02:00
leukipp	552f0e19a4	feat: mqtt audio volume control #82	2025-09-26 13:47:15 +02:00
leukipp	890c84d69d	Merge branch 'develop' of https://github.com/leukipp/touchkio into develop	2025-09-21 22:47:10 +02:00
leukipp	ac69dee387	ref: improve error handling	2025-09-21 22:47:02 +02:00
leukipp	ac62dc17ce	build: update version	2025-09-19 22:07:45 +02:00
leukipp	f2f80e7d52	fix: mqtt config removal #79	2025-09-19 22:07:14 +02:00
leukipp	10e7ff078a	build: update version	2025-09-19 16:49:12 +02:00
leukipp	e677fff160	docs: update readme	2025-09-19 16:36:57 +02:00
leukipp	63db26611e	build: update dependencies	2025-09-19 15:57:13 +02:00
leukipp	5ec6577b5a	fix: option to ignore certificate errors #76	2025-09-19 15:52:09 +02:00
leukipp	0359742e70	docs: update readme	2025-09-11 08:55:00 +02:00
leukipp	b70f4074e5	docs: add hardware	2025-09-10 16:43:24 +02:00
leukipp	a4c300407b	ref: remove unsupported mqtt config	2025-09-10 16:00:26 +02:00
leukipp	758f64ced4	ref: add cpu thermal zone	2025-09-10 15:49:22 +02:00
leukipp	7ab803d4ca	ref: app update summary	2025-09-09 20:50:56 +02:00
leukipp	092697850d	build: compress zip	2025-09-09 19:59:30 +02:00
leukipp	422e92dd89	build: update version	2025-09-09 19:41:09 +02:00
leukipp	a15c0fc91d	docs: update readme	2025-09-09 19:33:33 +02:00
leukipp	358fa3ca9c	ref: use display status callback	2025-09-09 17:25:56 +02:00
leukipp	10722fa217	build: update build.json	2025-09-08 21:31:01 +02:00
leukipp	7267fafb97	ref: add console logs	2025-09-08 20:03:23 +02:00
leukipp	b5e95936dc	ref: obfuscate logged password	2025-09-08 18:58:29 +02:00
leukipp	047b38a41b	feat: extended logging #73	2025-09-08 17:31:42 +02:00
leukipp	a93fbb2ad3	build: update dependencies	2025-09-08 17:18:16 +02:00
leukipp	0b927a3ef6	fix: touch event handling for inactive screens #61	2025-09-08 16:23:04 +02:00
leukipp	d35cf27de9	fix: update last active only on touch #71	2025-09-08 09:56:27 +02:00
leukipp	19348b4b60	build: disable zip update	2025-09-06 20:27:01 +02:00
leukipp	ce1eed391d	build: update version	2025-09-06 20:08:16 +02:00
leukipp	fe6fe92656	docs: update readme	2025-09-06 20:07:41 +02:00
leukipp	3aea938cfb	fix: validate arguments file #69	2025-09-06 20:03:49 +02:00
leukipp	c39428fa42	build: update build.json	2025-09-06 19:48:02 +02:00
leukipp	7caa5bfc8a	ref: update images	2025-09-06 19:22:19 +02:00
leukipp	5f69961a9f	feat: mqtt app update #70	2025-09-06 19:21:51 +02:00
leukipp	f44d998016	build: improve update logic	2025-09-06 19:07:57 +02:00
leukipp	3ea65a4af8	build: update dependencies	2025-09-06 19:04:16 +02:00
leukipp	2ad49c3167	feat: add network address mqtt sensor #66	2025-09-03 22:13:45 +02:00
leukipp	ef2093a25e	feat: check sudo rights for mqtt #62	2025-09-03 16:01:47 +02:00
leukipp	2737eabd8a	fix: mqtt keyboard state #65	2025-09-01 17:22:26 +02:00
leukipp	b8f809c50e	build: update version	2025-08-31 22:04:56 +02:00
leukipp	c3e625a8f6	docs: update readme	2025-08-31 22:01:18 +02:00
leukipp	7c15707e3b	docs: add hardware	2025-08-31 21:06:57 +02:00
leukipp	dbd3756793	ref: update images	2025-08-31 20:33:07 +02:00
leukipp	85fe5a910a	fix: update service file #62	2025-08-31 20:31:38 +02:00
leukipp	d78088e6af	feat: side panel pager #46	2025-08-31 19:24:50 +02:00
leukipp	bf77d9b2a0	fix: mqtt memory leak #63	2025-08-31 16:09:39 +02:00
leukipp	f4ca7bc412	feat: basic keyboard navigation #46	2025-08-31 11:41:12 +02:00
leukipp	d0ea377ead	feat: add page zoom buttons #48	2025-08-31 09:24:30 +02:00
leukipp	9a829f72e3	build: update dependencies	2025-08-31 08:48:24 +02:00
leukipp	482a56c9b9	build: update dependencies	2025-08-27 20:03:26 +02:00
leukipp	32409983b2	fix: remember zoom level on refresh #52	2025-08-27 20:02:59 +02:00
leukipp	fe0667919e	feat: check online status #62	2025-08-27 18:30:15 +02:00
leukipp	0037a892cd	ref: display status fallback	2025-08-27 18:26:40 +02:00
leukipp	ad22dd3215	feat: kde wayland support #57	2025-08-26 17:15:21 +02:00
leukipp	619179c3c8	fix: event based communication #39 #48 #55	2025-08-25 18:52:25 +02:00
afsy-d	7e5e669b09	Added hardware information (#56 ) * Update HARDWARE.md Added CM4 light 2GB information * Update HARDWARE.md Updated information regarding CM4	2025-08-25 13:31:51 +02:00
Tom Carpenter	437c4ab1c5	Make Webview Zoom Changeable from Home Assistant (#52 ) * Add Page Zoom Control Adds MQTT discovery for a "Page Zoom" input to control the `WEBVIEW.viewZoom` parameter. The MQTT value has been configured to be in % which is then converted to a scale factor when assigned or read from `WEBVIEW.viewZoom`. * Correct Type for page_zoom publishConfig Accidentally replaced "number" with "zoom" when changing paramters. * Add updateZoom Functionality to webview Add a setter function for the viewZoom property that updates the zoom factor for all views when the property is changed.	2025-08-25 13:31:28 +02:00
leukipp	ea01876ea7	build: update version	2025-07-10 21:31:48 +02:00
leukipp	9de170ce6c	docs: update readme	2025-07-10 21:16:52 +02:00
leukipp	6b3e89d522	build: update dependencies	2025-07-10 21:15:19 +02:00
leukipp	cbfd0538e7	feat: auto-hide navigation bar #45	2025-07-10 20:54:32 +02:00
leukipp	d3af6d397e	docs: add hardware	2025-07-10 13:58:32 +02:00
leukipp	dd81da204e	ref: update images	2025-07-10 13:23:53 +02:00
leukipp	00aef6402e	fix: use apt instead of dpkg #28	2025-07-09 20:21:24 +02:00
leukipp	a36c624601	ref: show version info	2025-07-09 20:20:07 +02:00
leukipp	adbc214f4d	feat: battery power level over mqtt #33	2025-07-09 19:14:36 +02:00
leukipp	e64f092f6c	ref: navigation buttons	2025-07-09 16:11:28 +02:00
leukipp	cab2052477	ref: move and rename mqtt topics	2025-07-08 19:40:43 +02:00
leukipp	0d66d104fb	fix: command line single arguments #40	2025-07-08 19:24:14 +02:00
leukipp	1afe335379	feat: multi webpage support #25	2025-07-08 14:20:19 +02:00
Miha Frangež	568be07043	Fix for URL containing query params (#40 )	2025-07-06 16:21:37 +02:00
leukipp	9d70b09358	ref: update data types	2025-06-25 14:10:10 +02:00
leukipp	6570d5c00e	fix: return default values #39	2025-06-24 11:15:56 +02:00
leukipp	af7d0c58ce	fix: show web url error #34	2025-06-24 10:59:32 +02:00
leukipp	aed79ab519	build: update version	2025-02-23 22:32:18 +01:00
leukipp	e2397bad65	ref: update status values	2025-02-23 22:31:31 +01:00
leukipp	e7622bef17	ref: use null status	2025-02-23 22:18:25 +01:00
leukipp	2553f52983	build: downgrade dependencies	2025-02-23 22:15:36 +01:00
leukipp	30b5ec2d8b	docs: add hardware	2025-02-23 21:13:50 +01:00
leukipp	94c7e34706	docs: update readme	2025-02-23 20:54:02 +01:00
leukipp	09dda65333	ref: start touchkio	2025-02-23 20:29:23 +01:00
leukipp	99f465a044	build: update dependencies	2025-02-23 20:18:26 +01:00
leukipp	02d1309345	Merge branch 'main' into develop	2025-02-23 16:48:19 +01:00
Sebastian	3142606d12	Update README.md (#20 ) Adding info on how to control the automatically created service	2025-02-23 16:46:30 +01:00
leukipp	51189e8595	fix: reduce file system read cycle #19	2025-02-23 16:45:40 +01:00
leukipp	71a9d4c1de	ref: code cleanup	2025-02-23 16:38:23 +01:00
leukipp	f022db9478	ref: use async update	2025-02-23 15:15:06 +01:00
leukipp	fcc0e5813e	feat: check for DISPLAY variable #12	2025-02-23 13:36:46 +01:00
leukipp	6d23efd713	ref: add debug arguments	2025-02-23 13:01:14 +01:00