diff --git a/docs/tutorial_installer.md b/docs/tutorial_installer.md
new file mode 100644
index 0000000..11d8e58
--- /dev/null
+++ b/docs/tutorial_installer.md
@@ -0,0 +1,75 @@
+# Tutorial with Installer
+
+Create a voice satellite using a Raspberry Pi 3+ and USB microphone and speakers.
+
+## Install OS
+
+Follow instructions to [install Raspberry Pi OS](https://www.raspberrypi.com/software/). Under "Choose OS", pick "Raspberry Pi OS (other)" and "Raspberry Pi OS (Legacy, **64-bit**) Lite".
+
+When asking if you'd like to apply customization settings, choose "Edit Settings" and:
+
+* Set a username/password
+* Configure the wireless LAN
+* Under the Services tab, enable SSH and use password authentication
+
+## Install Dependencies
+
+After flashing and booting the satellite, connect to it over SSH using the username/password you configured during flashing.
+
+**On the satellite**, make sure system dependencies are installed:
+
+```sh
+sudo apt-get update
+sudo apt-get install --no-install-recommends  \
+  git \
+  python3-venv
+```
+
+Clone the `wyoming-satellite` repository:
+
+```sh
+git clone https://github.com/rhasspy/wyoming-satellite.git
+```
+
+Now you can run the installer:
+
+```sh
+cd wyoming-satellite/
+python3 -m installer
+```
+
+## Satellite
+
+Under the "Satellite" menu, select "Satellite Type" and choose "Local wake word detection" (with the space bar).
+
+## Microphone
+
+Make sure you USB microphone is plugged in.
+
+Under the "Microphone" menu, select "Autodetect", and speak loudly into the microphone for a few seconds.
+
+In "Audio Settings", set "Noise Suppression" to "Medium" and "Auto Gain" to 15.
+
+## Speakers
+
+Make sure your USB speakers are plugged in.
+
+Under the "Speakers" menu, choose "Test All Speakers". For each device, choose "Play Sound" and listen. If you hear the sound, select "Choose This Device"; otherwise, select "Next Device".
+
+In "Toggle Feedback Sounds", enable "On wake-up" and "After voice command" (with the space bar).
+
+## Wake Word
+
+Under the "Wake Word" menu, select "Wake Word System" and choose "openWakeWord" (with the space bar). When prompted, install openWakeWord.
+
+In the "openWakeWord" menu, choose "Download Community Wake Words". Back in the "Wake Word" menu, select "Choose Wake Word" and select one (with the space bar).
+
+## Apply Settings
+
+From the main menu, select "Apply Settings" and enter your password.
+
+Check logs with:
+
+```sh
+sudo journalctl -f -u wyoming-satellite.service
+```